Any one know where I can find the bracket that holds the Cruise Control Cable and the Throttle Cable to the Plenum. Not the one closest to the TB but the one between the middle runners on the drivers side of the Plenum. Looks like a glorified spark plug wire holder but it has been discontinued from GM. If it is unavailable, has anyone figured out a different mount for the cables or is it really necessary...this is my first TPI motor.

Thank you...

 

If you can find a picture, I very well may have it. I just cant recall what It looks like.

 

Sorry...But how do I attach a picture?

 

I think I figured it out...it is #22 in the picture. Please let me know and Thank you!!

 

Have you tried Hawks or ThirdGen Ranch - I'm sure one of them has one lying around.

 

Contacted Third Gen Ranch...they only sell complete units. At least that is what they told me. What is Hawks?

 

http://www.hawksthirdgenparts.com/

 

Sorry, I don't have it.
Hawks would probably be your best bet for an original.

If it really is a glorified spark wire holder, why not go to a Pepboys or something similar and get one, they sell them with different numbers of holders. Then depending on the size of the cables, use rubber grommets so they fit snug. Just an idea.

 

Thanks for checking...I spoke with Hawks. It is actually two pieces...a bolt that attaches the cable holder to the plenum and the plastic cable holder. I have the bolt and they won't just sell me the cable holder. I'll try something like you mentioned unless someone else chimes in here.

I also need a stock water neck inlet if anyone has one of those...