First ever race, First ever kill... 60's camaro
Thread Starter
Senior Member
iTrader: (1)
Joined: Apr 2008
Posts: 267
Likes: 0
From: Graham, NC
Car: 89 Camaro
Engine: 383 w/ 450HP
Transmission: TKO-600
Axle/Gears: 3.42
First ever race, First ever kill... 60's camaro
well first off im not a real big fan of racing on the street, thats why this was the first race in the 6mo ive had the car running. that being said i couldnt help myself when i saw a 60's model camaro (69?) roll up beside me and match speed. so im running like 2500rpm in 2nd gear, hes right beside me and i wait for him to go. When he kicks it i follow close suit, spin ... wheelhop pretty good, but quickly close the 1/2 car jump he took and pulled a car length on him. by this time i have run out 2nd gear and am prolly goin 60 mph on a 55mph zone so i let off and he pulls back along side. Do the same thing all over again, kick 2nd,... spin ... wheelhop, grab 3rd and spin it for a sec and let off. Pulled 2 cars on him and let off. He gives me the thumbs up and we go our seperate ways. Prolly hit about 65-70 ( the speedo isnt hooked up yet after last weekends tko swap)This was more play than race, dont wry the road was empty. His car was beautiful but it was nice to see him give my dirty 3rd gen a thumbs up!
Now on the agenda for tomorrow is fix that stupid wheel hop,... somehow?

Now on the agenda for tomorrow is fix that stupid wheel hop,... somehow?
Supreme Member
iTrader: (4)
Joined: Feb 2000
Posts: 2,850
Likes: 0
From: Winston salem, NC
Car: 1987 1SICIROC.....1999 TransAm
Engine: 385 HSR.....LS1
Transmission: 700R4 with Midwest 3400 2.4str...M6
Axle/Gears: SLP Zexel Posi unit 3.42's...3.73's
Re: First ever race, First ever kill... 60's camaro
good one!......just keep your eyes open for who might be watching in the screwed up state!.....LOL I know first hand!
LCA's should fix that wheel hop
LCA's should fix that wheel hop
Thread Starter
Senior Member
iTrader: (1)
Joined: Apr 2008
Posts: 267
Likes: 0
From: Graham, NC
Car: 89 Camaro
Engine: 383 w/ 450HP
Transmission: TKO-600
Axle/Gears: 3.42
Re: First ever race, First ever kill... 60's camaro
Are you talking about the brackets?
Even on a non lowered car?
Supreme Member
iTrader: (4)
Joined: Feb 2000
Posts: 2,850
Likes: 0
From: Winston salem, NC
Car: 1987 1SICIROC.....1999 TransAm
Engine: 385 HSR.....LS1
Transmission: 700R4 with Midwest 3400 2.4str...M6
Axle/Gears: SLP Zexel Posi unit 3.42's...3.73's
Re: First ever race, First ever kill... 60's camaro
yeah even on a non lowered car...they help....cause you can adjust the settings on them. Usually its either the bottom hole or the one right above it......my car was lowered and I had them set on the bottom hole and never once had wheel hop and it was pushing alot of power with the 3600 stall on top of it.
I hope to have the car back someday...still waiting to see
and once in a blue moon is usually when they get ya....just be careful, i'd hate to see someone else lose their car.
I hope to have the car back someday...still waiting to see
and once in a blue moon is usually when they get ya....just be careful, i'd hate to see someone else lose their car.
Supreme Member
iTrader: (4)
Joined: Feb 2000
Posts: 2,850
Likes: 0
From: Winston salem, NC
Car: 1987 1SICIROC.....1999 TransAm
Engine: 385 HSR.....LS1
Transmission: 700R4 with Midwest 3400 2.4str...M6
Axle/Gears: SLP Zexel Posi unit 3.42's...3.73's
Re: First ever race, First ever kill... 60's camaro
i cant remember what kind I had.....OH LOL>..its says it in my sig. sorry!...Im getting ahead of myself....
what your needing is the Relocation brackets.
what your needing is the Relocation brackets.
Thread Starter
Senior Member
iTrader: (1)
Joined: Apr 2008
Posts: 267
Likes: 0
From: Graham, NC
Car: 89 Camaro
Engine: 383 w/ 450HP
Transmission: TKO-600
Axle/Gears: 3.42
Re: First ever race, First ever kill... 60's camaro
don't worry this was the first and last. Next will be Piedmont or Rockingham.
Member
Joined: Jul 2007
Posts: 465
Likes: 0
From: york, PA
Car: 88 iroc camaro
Engine: jasper 350, l98
Transmission: 700R4, corvette servo, shift kit.
Axle/Gears: stock
Re: First ever race, First ever kill... 60's camaro
as mentionded above by wish master, definatly look into relocation brackets.
Trending Topics
Member
Joined: Apr 2008
Posts: 218
Likes: 0
From: Dubai
Car: 1991
Engine: 350
Transmission: 700
Axle/Gears: 3.23
Re: First ever race, First ever kill... 60's camaro
Let me know which one of the pics the Camaro looked like and I will tell you what year it was. By the way congrats.
Thread Starter
Senior Member
iTrader: (1)
Joined: Apr 2008
Posts: 267
Likes: 0
From: Graham, NC
Car: 89 Camaro
Engine: 383 w/ 450HP
Transmission: TKO-600
Axle/Gears: 3.42
Re: First ever race, First ever kill... 60's camaro
if i had to guess from thoes pics i would say '69
Supreme Member
iTrader: (25)
Joined: Feb 2006
Posts: 7,260
Likes: 5
From: Manteca,California. Nor Cal.
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: First ever race, First ever kill... 60's camaro
LCA will deffinately help. i bought tubular sphon's and it took away all the wheel hop. until i lowered the front end then i put on the brackets too..took it all away. deffinately something i recomend doing.
Thread Starter
Senior Member
iTrader: (1)
Joined: Apr 2008
Posts: 267
Likes: 0
From: Graham, NC
Car: 89 Camaro
Engine: 383 w/ 450HP
Transmission: TKO-600
Axle/Gears: 3.42
Re: First ever race, First ever kill... 60's camaro
Should i go with weld on or bold on LCARB's? i can weld but not to well upside down under the car, lol. Is there enough of a diff between the two to care?
Junior Member
Joined: Dec 2006
Posts: 64
Likes: 0
From: Htown, TX
Car: 1990 Firebird
Engine: 3.1....4159265
Transmission: 700r4
Axle/Gears: axle rose and metal gear solid
Re: First ever race, First ever kill... 60's camaro
Thread
Thread Starter
Forum
Replies
Last Post





