Anyone remember who made this version of runners?
Thread Starter
TGO Supporter
Joined: Jul 2001
Posts: 4,991
Likes: 1
From: Cheyenne, Wyoming
Car: 1992 B4C 1LE
Engine: Proaction 412, Accel singleplane
Transmission: built 700R4 w/custom converter
Axle/Gears: stock w/later 4th gen torsen pos
Anyone remember who made this version of runners?
Anyone remember who made this version of runners? Who would have any info or links on them? I thought they might be early SLP or maybe GM experimental? My Brian says it was GM, but that maybe SLP helped them make it for the proposed 25th anniversary car that was never made or the Firehawks before they made the T ram?
Thread Starter
TGO Supporter
Joined: Jul 2001
Posts: 4,991
Likes: 1
From: Cheyenne, Wyoming
Car: 1992 B4C 1LE
Engine: Proaction 412, Accel singleplane
Transmission: built 700R4 w/custom converter
Axle/Gears: stock w/later 4th gen torsen pos
Re: Anyone remember who made this version of runners?
Solved: They were the ones cast by Ed Hamburger (SLP) for the Z4F option 25th anniversary cars that were never made. Who would be interested in a reproduction set? For like $350?
Joined: Mar 2017
Posts: 4,255
Likes: 427
From: Portland, OR
Car: 86 Imponte Ruiner 450GT, 91 Formula
Engine: 350 Vortec, FIRST TPI, 325 RWHP
Transmission: 700R4 3000 stall.
Axle/Gears: 9 Bolt Torsen 3.70
Re: Anyone remember who made this version of runners?
Cool I guess. But doesn't really address the rest of the intake. Why bother when you can get this and solve all the problems at once:
https://firstfuelinjection.com/
https://firstfuelinjection.com/
Member
iTrader: (2)
Joined: Oct 2007
Posts: 321
Likes: 18
From: Portland Or.
Car: 1992 Z28 1LE
Engine: L98
Transmission: 700R4
Axle/Gears: SLP dana 44 3.92
Re: Anyone remember who made this version of runners?
There's another member on here who was talking to the guy who actually cast those parts and was talking about reproduction not too long ago.
Joined: Jul 2013
Posts: 1,208
Likes: 153
From: *member since 1999, I think - just can't remember my old name, and the big site crash...*
Car: 89 GTA ASC Conv., Prev: 89 GTA 6.3L
Engine: 5.7L L98 TPI
Transmission: 700r4 Automatic
Axle/Gears: 3.27:1 w/ JG1 Options:B2L, N10, U1A
Thread Starter
TGO Supporter
Joined: Jul 2001
Posts: 4,991
Likes: 1
From: Cheyenne, Wyoming
Car: 1992 B4C 1LE
Engine: Proaction 412, Accel singleplane
Transmission: built 700R4 w/custom converter
Axle/Gears: stock w/later 4th gen torsen pos
Re: Anyone remember who made this version of runners?
Cool I guess. But doesn't really address the rest of the intake. Why bother when you can get this and solve all the problems at once:
https://firstfuelinjection.com/
https://firstfuelinjection.com/
Joined: Jul 2003
Posts: 2,017
Likes: 13
From: Troup, Texas
Car: 1989 Camaro IROC-Z
Engine: ZZZ# 0607 of 1200 produced
Transmission: Pro-Built 700R4/Vig.2400
Axle/Gears: 3.27 BW 9 Bolt PBR Disc
Re: Anyone remember who made this version of runners?
I'd buy a set, just to see what they can do. And at $350.00 it would beat the other options available out there. People are asking a lot of money for old Accel's and SLP's even.
Trending Topics
Senior Member
Joined: Feb 2011
Posts: 653
Likes: 5
From: Long Island, NY
Car: 87 Trans Am, 99 WS6, 16 Mustang GT
Engine: LB9, LS1
Transmission: 700R4, T56
Axle/Gears: 3.42 Posi, 4.10 Posi
Re: Anyone remember who made this version of runners?
I would 100% be in for a set at 350. ****, I'd pay up to $500 if they were an exact match to those GM runners.
Junior Member
iTrader: (1)
Joined: Nov 2017
Posts: 71
Likes: 4
From: South of Dallas
Car: Formula 350
Transmission: A4
Axle/Gears: 3.27
Re: Anyone remember who made this version of runners?
Re: Anyone remember who made this version of runners?
I would cast a set after the welded and ported TPI runners Dyno Don and crew are using. If you can also get an updated lower TPI base that flows like the welded and ported base Dyno Don and crew have been using, I'd really be interested in that. Without a good flowing base, you don't really take full advantage of such runners
Joined: Mar 2000
Posts: 5,703
Likes: 132
From: Orange, CA
Car: '90 Trans Am-12.45@110.71
Engine: 355 w/AFR 195's Elem. 400/430 HP/TQ
Transmission: Tremec T-56
Axle/Gears: 12 Bolt 3.73
Re: Anyone remember who made this version of runners?
Maybe ...but nothing works better, Not even a SR (tested)
Thread Starter
TGO Supporter
Joined: Jul 2001
Posts: 4,991
Likes: 1
From: Cheyenne, Wyoming
Car: 1992 B4C 1LE
Engine: Proaction 412, Accel singleplane
Transmission: built 700R4 w/custom converter
Axle/Gears: stock w/later 4th gen torsen pos
Re: Anyone remember who made this version of runners?
I don't know now. I haven't talked to him in a while. He got mad at me on facebook and unfriended me. There is a chance that the Chinese casting guys would jump at this if they just knew what we would pay for them. They have no idea there is a niche market for them. I would prefer a US producer. But I don't know if any are interested.
Joined: Jul 2013
Posts: 1,208
Likes: 153
From: *member since 1999, I think - just can't remember my old name, and the big site crash...*
Car: 89 GTA ASC Conv., Prev: 89 GTA 6.3L
Engine: 5.7L L98 TPI
Transmission: 700r4 Automatic
Axle/Gears: 3.27:1 w/ JG1 Options:B2L, N10, U1A
Re: Anyone remember who made this version of runners?
Are they cast yet? I need to pull my intake, so when it goes back together, I'd add them. Thanks.
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
Re: Anyone remember who made this version of runners?
I would cast a set after the welded and ported TPI runners Dyno Don and crew are using. If you can also get an updated lower TPI base that flows like the welded and ported base Dyno Don and crew have been using, I'd really be interested in that. Without a good flowing base, you don't really take full advantage of such runners
Thread
Thread Starter
Forum
Replies
Last Post
Chevy86 IROC-Z
TPI
10
Apr 23, 2012 09:06 PM
355tpipickup
Alternative Port EFI Intakes
7
Dec 28, 2009 11:37 PM
monte-ss
DIY PROM
2
Apr 27, 2002 05:20 PM