Acctually i have an 86 iroc but my rother has an 88 mustang GT. His tranny busted some gears, so, i need to know will a camaro T5 fit in his car, or is there any other car that shares that same tranny.
I know this is not thirdgen but he is my brother and i want to help him out.

 

I bought a Mustang ('93 GT) W/C T5 for my Camaro, but the bell to trans bolt pattern and the cutout in the bell were different. Also, the tranny in the Fbody is tilted 17*, so you won't be able to bolt the crossmember up.

Sorry, but No Dice.

JK

 

thats just the bellhousing though. get the camaro bellhousing and it should bolt right up. but I think the input shaft on the 'stangs is different, so you might as well get one from an f-body.

 

No, a T-5 from a camaro will not fit a mustang,and vice versa. The front and rear housings are different as well as the input/output shafts.

 

Mustang T-5s have no torque arm holes. that is the main thing.

 

okay, so i won't bother telling him he can do it, for some reason it seems as the ford T5's and crap, and around here you can't find any for under $600.
Thanks for the responses

 

No, the chevy bellhousing WILL NOT bolt up to the ford transmission.Also, the imput shaft on the ford is about 11/16" longer than the chevy. You COULD meake a spacer with both patterns and thick enough to make up the difference in imput length, but you've still got the outputspline and torque arm mounting problem.

 

my bad, just my ignorance coming out I guess. Ive never actually looked at the two, I guess I was just assuming.