Upper intake double spacer?
Thread Starter
Senior Member




Joined: Sep 2014
Posts: 749
Likes: 39
From: Los Angeles
Car: 92 Z28 Clone
Engine: Vortec 350
Transmission: T-56
Axle/Gears: 3.23 Torsen
Upper intake double spacer?
I have read that a throttle body spacer helps higher power band. I was brainstorming and thought hey what about if i stick a spacer on each side in between the upper intake plenum and lower intake plenum. Right in this area. Maybe a one inch space ? What do you guys think will i see some gains?
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Re: Upper intake double spacer?
RBob.
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Re: Upper intake double spacer?
Here are a few threads:
https://www.thirdgen.org/forums/v6/6...-best-mod.html
https://www.thirdgen.org/forums/v6/6...d-spacers.html
I used "plenum + spacer" (without the quotes) in the search title. There are additional threads on the topic.
RBob.
https://www.thirdgen.org/forums/v6/6...-best-mod.html
https://www.thirdgen.org/forums/v6/6...d-spacers.html
I used "plenum + spacer" (without the quotes) in the search title. There are additional threads on the topic.
RBob.
Senior Member
Joined: Jan 2008
Posts: 917
Likes: 1
From: peterborough UK
Car: 88 T firebird
Engine: 2.8
Transmission: t5
Re: Upper intake double spacer?
Interesting, runner lengths are very important in tuning any engine, i supose it depends if the mods match your driving style ? Or not. Try it and play around and see for your self id say .
Supreme Member




Joined: Oct 2004
Posts: 4,527
Likes: 240
From: Henrietta NY
Car: 1984 Trans Am L69
Engine: Sniper EFI Powered 355
Transmission: WC T5 w/ Steel Support Plate
Axle/Gears: 3.42 10 Bolt Posi
Re: Upper intake double spacer?
Get some wood and a gasket and then cut some out should be fairly ez with a jig saw and drill fast way to test. You can also get some gasket material and cut your own as you will need 4 total
Thread Starter
Senior Member




Joined: Sep 2014
Posts: 749
Likes: 39
From: Los Angeles
Car: 92 Z28 Clone
Engine: Vortec 350
Transmission: T-56
Axle/Gears: 3.23 Torsen
Re: Upper intake double spacer?
Yeah i was planning on using wood seems pretty easy. As for mods, i have a few nothing major, ac and smog pump delete, shorter belt. Ram air intake, f1ze injectors, egr delete, aluminum driveshaft, torsen diff. pulls pretty good. Ill be getting back to you guys with my results . I think I'm gonna start with a whole inch.
Trending Topics
Joined: Mar 2011
Posts: 6,287
Likes: 41
From: Northwest Ohio
Car: 1991 Camaro RS
Engine: Lq4 6.0 SBE s485 turbo E85
Transmission: Fsi th400 stage 4. TSI 5500 st
Axle/Gears: Strange S60 4:10s
Re: Upper intake double spacer?
Its not going to help you any.... may look like it does, but it wont. This is especially so with the 2.8 or 3.1l intakes and heads. You could start over and build a new intake manifold to change the runners but as it sits... a 1 inch spacer is not going to give you a noticible effect or change your power band at all with that engine at least...
Senior Member
Joined: Jan 2008
Posts: 917
Likes: 1
From: peterborough UK
Car: 88 T firebird
Engine: 2.8
Transmission: t5
Re: Upper intake double spacer?
I'm not guna say fasteddi is wrong, because he might not be ! And he has done much engine tuning , but I think it is still worth a try, and wood is a good way to do it.
if it lowers the powerband a little, so the car picks up quicker, bit like putting smaller gears in . It may be noticeable and nicier to drive.
As I said before it also depends on driving style , it may or may not suit you . I still say give it a shot .
if it lowers the powerband a little, so the car picks up quicker, bit like putting smaller gears in . It may be noticeable and nicier to drive.
As I said before it also depends on driving style , it may or may not suit you . I still say give it a shot .
Thread
Thread Starter
Forum
Replies
Last Post





