SLP Loud mouth exhaust and y-pipe
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Dayton, OH
Car: 1985 Pontiac Trans Am - PROJECT
Engine: 412 c.i. SBC / 6.75 L
Transmission: 700R4
Axle/Gears: Borg Warner 3.27
SLP Loud mouth exhaust and y-pipe
I am nearing completion of my project and originally planned to use an SLP loudmouth catback that I got from someone on here. I even wet sanded the tips to the point that they shine pretty nicely. I had also ordered y-pipe from Summit that I am no longer using. I'm going with a different setup and so these are just taking up space...
Asking $300 for the catback and $50 for the y-pipe.
Respond here or pm me. I'm located in Dayton, OH. Thanks!
Asking $300 for the catback and $50 for the y-pipe.
Respond here or pm me. I'm located in Dayton, OH. Thanks!
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: SLP Loud mouth exhaust and y-pipe
would you ship loudmouth to pittsburgh area? Also is it the 3" system? dayton to far of a drive for me
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Dayton, OH
Car: 1985 Pontiac Trans Am - PROJECT
Engine: 412 c.i. SBC / 6.75 L
Transmission: 700R4
Axle/Gears: Borg Warner 3.27
Re: SLP Loud mouth exhaust and y-pipe
Yeah, it's the 3 inch and I would have to get a box for it / get a shipping quote.
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: SLP Loud mouth exhaust and y-pipe
This SLP loudmouth was made for a 4th gen right? I was hoping to put this on my 4th gen
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Dayton, OH
Car: 1985 Pontiac Trans Am - PROJECT
Engine: 412 c.i. SBC / 6.75 L
Transmission: 700R4
Axle/Gears: Borg Warner 3.27
Re: SLP Loud mouth exhaust and y-pipe
Uhm... no, these are third gen parts 





Trending Topics
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Dayton, OH
Car: 1985 Pontiac Trans Am - PROJECT
Engine: 412 c.i. SBC / 6.75 L
Transmission: 700R4
Axle/Gears: Borg Warner 3.27
Re: SLP Loud mouth exhaust and y-pipe
I BELIEVE they are 2.5". I'm 95% sure it was this set from Summit. http://www.summitracing.com/parts/HE...8/?image=large
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: SLP Loud mouth exhaust and y-pipe
Not the loudmouth i was thinking of...one i was thinking of was single resonator and no muffler like that. didnt know they had a loudmouth for thirdgens. That looks more like the SLP two out the left (TOTL). Oh well, thanks
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Dayton, OH
Car: 1985 Pontiac Trans Am - PROJECT
Engine: 412 c.i. SBC / 6.75 L
Transmission: 700R4
Axle/Gears: Borg Warner 3.27
Re: SLP Loud mouth exhaust and y-pipe
Anyone interested in the catback?
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Dayton, OH
Car: 1985 Pontiac Trans Am - PROJECT
Engine: 412 c.i. SBC / 6.75 L
Transmission: 700R4
Axle/Gears: Borg Warner 3.27
Re: SLP Loud mouth exhaust and y-pipe
Everything is still available...
Senior Member
iTrader: (10)
Joined: Jan 2009
Posts: 718
Likes: 1
From: Edmonton, Alberta.
Car: 1988 Pontiac Trans Am GTA.
Engine: 385 stroker sbc
Transmission: TKO600
Axle/Gears: Moser 9" 3.70 Wavetrac
Re: SLP Loud mouth exhaust and y-pipe
I'm interested in the muffler and tail pipes. Not the entire set-up
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Dayton, OH
Car: 1985 Pontiac Trans Am - PROJECT
Engine: 412 c.i. SBC / 6.75 L
Transmission: 700R4
Axle/Gears: Borg Warner 3.27
Re: SLP Loud mouth exhaust and y-pipe
That would make it easier to ship. Want a quote somewhere?
Junior Member
iTrader: (5)
Joined: Feb 2007
Posts: 72
Likes: 2
From: Yukon, OK 73099
Car: 88MCSS/92Firebird
Engine: 421/355
Transmission: TH-350/4L60
Axle/Gears: 4.11/2.73
Re: SLP Loud mouth exhaust and y-pipe
Is the driver's side collector ring mount on there or can the slip fit still be opened up to get one on there? Also what would you do shipped to 73099 OK for just the y pipe?
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Dayton, OH
Car: 1985 Pontiac Trans Am - PROJECT
Engine: 412 c.i. SBC / 6.75 L
Transmission: 700R4
Axle/Gears: Borg Warner 3.27
Re: SLP Loud mouth exhaust and y-pipe
I'd do 75 shipped for the y-pipe. It is still in new-ish condition (been in the garage unboxed). Nothing has been clamped, so the slip fit is still loose. I THINK I still have the ring as well. Let me know.
Both pieces of exhaust are still available... need them gone...
Both pieces of exhaust are still available... need them gone...
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Dayton, OH
Car: 1985 Pontiac Trans Am - PROJECT
Engine: 412 c.i. SBC / 6.75 L
Transmission: 700R4
Axle/Gears: Borg Warner 3.27
Re: SLP Loud mouth exhaust and y-pipe
All items still available. Sorry to the canucks, but I wont ship across lines after the fiasco I went through a few years back...
Senior Member
iTrader: (10)
Joined: Jan 2009
Posts: 718
Likes: 1
From: Edmonton, Alberta.
Car: 1988 Pontiac Trans Am GTA.
Engine: 385 stroker sbc
Transmission: TKO600
Axle/Gears: Moser 9" 3.70 Wavetrac
Re: SLP Loud mouth exhaust and y-pipe
Sorry to the canucks
Senior Member
Joined: Feb 2010
Posts: 1,125
Likes: 1
From: San Diego, California
Car: Trailblazer EXT 4.2 (Firebird Form)
Engine: 5.1 4bbl
Transmission: 700R4 Mega Raptor Level 4
Axle/Gears: 2.73
Junior Member
iTrader: (3)
Joined: Nov 2008
Posts: 93
Likes: 1
From: Lima, Ohio and Ft. Lauderdale, FL
Car: 1983 Camaro Z28
Engine: 350
Transmission: 700R4
Axle/Gears: 3.42
Re: SLP Loud mouth exhaust and y-pipe
Last edited by Jr. Mechanic; Apr 4, 2010 at 09:58 PM.
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Dayton, OH
Car: 1985 Pontiac Trans Am - PROJECT
Engine: 412 c.i. SBC / 6.75 L
Transmission: 700R4
Axle/Gears: Borg Warner 3.27
Re: SLP Loud mouth exhaust and y-pipe
PM sent. Sorry about the delay. Pipe should arrive Tuesday if not earlier.
Member
iTrader: (2)
Joined: Jan 2006
Posts: 103
Likes: 1
From: Ettrick WI
Car: 92 Z,92 RS,95 SS,00 WS6, 04 XUV
Engine: 383z,350RS, LT1, LS1 ,vortec 4.2
Transmission: 700R4, 700R4,4L60E,4L60E, Auto,
Re: SLP Loud mouth exhaust and y-pipe
whats your bottom dollar on the exhaust shipped to ettrick Wi 54627. thanks Les
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Dayton, OH
Car: 1985 Pontiac Trans Am - PROJECT
Engine: 412 c.i. SBC / 6.75 L
Transmission: 700R4
Axle/Gears: Borg Warner 3.27
Re: SLP Loud mouth exhaust and y-pipe
Hope it goes to good use!
I'll check on shipping of the catback when I take my intake to get shipped out. I'll get back to you guys as soon as I can.
I'll check on shipping of the catback when I take my intake to get shipped out. I'll get back to you guys as soon as I can.
Member
iTrader: (2)
Joined: Jan 2006
Posts: 103
Likes: 1
From: Ettrick WI
Car: 92 Z,92 RS,95 SS,00 WS6, 04 XUV
Engine: 383z,350RS, LT1, LS1 ,vortec 4.2
Transmission: 700R4, 700R4,4L60E,4L60E, Auto,
Re: SLP Loud mouth exhaust and y-pipe
shipping on the catback to 54627 ettrick wi. thanks les
Re: SLP Loud mouth exhaust and y-pipe
Thanks for the catback.. already found a new home in the garage! Exactly as pictured and advertised. 2 thumbs up as a seller!
I feel like a dumbass, though.. my wife (
) where the intermediate pipe to catalyst collar was.. did I forget that or did you not get it when you bought the catback? If not, that's OK, I'm sure I'll be able to find something that will work.
Rich
I feel like a dumbass, though.. my wife (
) where the intermediate pipe to catalyst collar was.. did I forget that or did you not get it when you bought the catback? If not, that's OK, I'm sure I'll be able to find something that will work.Rich
Thread Starter
Member
iTrader: (1)
Joined: Apr 2007
Posts: 129
Likes: 0
From: Dayton, OH
Car: 1985 Pontiac Trans Am - PROJECT
Engine: 412 c.i. SBC / 6.75 L
Transmission: 700R4
Axle/Gears: Borg Warner 3.27
Re: SLP Loud mouth exhaust and y-pipe
Those three sections were all that I got. It was no big deal for my setup since I had an open header car anyway. Sorry!! (Nice to meet you, though.)
Thread
Thread Starter
Forum
Replies
Last Post











