Battery cable trouble
#1
Member
Thread Starter
Join Date: Oct 2011
Location: British columbia, Canada
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Firebird
Engine: 5.0L V8
Transmission: T-5
Axle/Gears: 2.73
Battery cable trouble
The ends on my battery cables are pretty gnarly so I wanted to cut them back and splice them, but can I safely (and legally) do that? Or is there a way to just replace the whole battery cable without a harness swap?
#2
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,732
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: Battery cable trouble
#5
Senior Member
iTrader: (3)
Re: Battery cable trouble
The negative cable is easier to do; it's right on top. The positive is a bit trickier only because of tight quarters (I have an 8 cyl. TPI) but if you have a jack & stands, it will be easier. Figure about a half hour for removal and re-install of both. I bought Duralast Gold 2 gauge at Autozone for about 13 bucks each. If that's too much, they have less expensive options.
Thread
Thread Starter
Forum
Replies
Last Post
gta892000
Cooling
6
09-16-2015 12:37 AM