TheWraith

the tubing is falling apart that i got with my paxton. I'm looking to ditch it all and get some nice tubing that preferably won't pop off on me.

Are there any companies who sell nice boost tubing?

Guido

Damn all you have had is problems with that paxton kit!

Boost tubing. Do you mean between the blower and the engine or between the air filter and the blower?

------------------
-86 IROC
S-Trim, Speed Pro, AFR
this years goal: 10.50 @ 130+ mph
-=ICON Motorsports=-

TheWraith

actually i mean couplers. The rubber oval piece that join the metal u to the throttle body, and the rubber cylinder that joins the first u to the second. The ones that you hose clamp down.

GMI FAST

I sell many shapes, sizes, colors, and types of both silicone and nitrile hose couplers. I also sell bad-*** 3/4" stainless t-clamps. Many pieces for any budget. You can call me at work to get pricing and to place an order.

Dan 630-801-1417 ext.2

IROCKZ4me

GMI has the ticket. My stuff was always blowing apart until I bought new hose and T bolt clamps. It hasn't blown off since.
https://www.thirdgen.org/messgboard/...ML/000521.html

------------------

Tracy /AKA IROCKZ4me
'86 IROC-Z Camaro
"Cogito ergo zoom"

• 355 cid
• AFR heads
• Arizona Speed & Marine hydraulic roller cam w/ AFR hydra-rev kit
• modified SLP runners
• TRW forged pistons/ceramic coated
• fully balanced
• Edelbrock headers/ceramic coated
• SLP cat-back
• Paxton supercharger
• Nitrous Express nitrous oxide

EFI Performance Club on Yahoo


[This message has been edited by IROCKZ4me (edited June 12, 2001).]

DARCOM

i was going to ask what tbolt clamps were
tell i realised i have them allready
you can see them on my motor at:

http://darcom.home.texas.net/

------------------
388 SuperRam, DFI, Vortech R trim ,N.O.S.,alki injection,
Dart sportmansII heads,50 pound injectors, Headman full headers
duel 3' exhaust,and Flowmasters, Ford nine inch with 370's
Ronal rims with Nitto drad raidals.

TheWraith

GMI Fast, i'll call you to order, but the problem is, i don't know exactly what i need to order, sizewise.

http://www.poorformance.net/iroc/enginebay.jpg

i need the rubber tubing/coupling for both ends of the big paxton elbow, and also the one from the little elbow to the blower itself. Does anyone have the sizes of this stuff available, or do i need to go measure it out?

I'd like like to get the t-clamps as well.

Thanks everyone.

Guido

Measure the inside diameter of the pieces you need.

TheWraith

i will, just have to wait until friday....the car is at my parents house up on ramps