david068513

iTrader: (2)

Anyone still make a bolt on kit for a 92 z28? I can't find one. Only tbi kits.

I want it to be a nano or progressive shot.

tom86iroc

iTrader: (1)

http://www.holley.com/05151NOS.asp here ya go

david068513

iTrader: (2)

Thanks, I'll look into that kit. I found that nitro Dave makes one too.

tom86iroc

iTrader: (1)

no problem

brandoz28

iTrader: (1)

i run a single nozzle Brand X kit from nitro dave's in my 87 iroc, the 50 shot got me from 9.3x to 8.8x

boosting28psi

I had a 150 shot on my L98 and it netted me mid 12's and it was BONE stock

Ronny

iTrader: (1)

NOS Sniper #7006....

david068513

iTrader: (2)

That's is the one I was looking at.
wow, Didn't expect it to help that much lol
thanks.

GetSum87

Question for you nitrous guys. I'm new here and just picked up a 87 iroc 350. It's got a flowmaster exhaust, other then that it's stock.

I was looking at this kit NOS 05151 TPI Nitrous System. If I installed this kit in my car would I have to worry about any issues as far as blowing the engine up or screwing stuff up? I'm only looking at 100hp gains.

Drew

iTrader: (58)

Go on the NOS website and read the instructions for that kit. It'll answer that question and most of the others you might have. The short answer is if your engine is in good health, it should be fine. However, it's going to increase the stresses on your engine. Any current weak link will be exaggerated, and if there is a soft spot you might find it with a nitrous kit.

GetSum87

Thanks for the help Drew. Any other kits out there that you guys recommend? I'm not looking at spraying more the 100hp.

joe2844

Hey everyone, I have for sale a NOS#5151 complete kit with purge kit for sale. $500 for everything. I'm located in lexington VA 24450 and if you can pick it up the tank has about 7-8 lbs of n20 left in it. i bought the kit new this past spring, put it on my stock longblock l98 spraying a 150 shot i ran 7.62@96mph in the 1/8th mile. it would run 8.1x@85 with the 100 shot. if u wanna go fast for a short time for a little money and work this is the way to go. PM me on here or text me @ 540-461-1038 if interested.