Third Generation F-Body Message Boards

 
Page 1 of 5
1
2
3
4
5
Search: Posts Made By: Brian'sIROC
Showing results 1 to 50 of 232
Search took 0.27 seconds.
Forum: Aftermarket Product Review
07-19-2006, 12:48 AM
Replies: 2
Views: 4,103
Posted By Brian'sIROC

1A Auto

I bought a headliner kit and carpet kit from them. I am impressed with the quality of both products. The headliner required minimal trimming to fit right.
Forum: TPI
09-10-2005, 12:52 AM
Replies: 8
Views: 7,109
Posted By Brian'sIROC

GM part number for the complete fuel rail o-ring...

GM part number for the complete fuel rail o-ring kit is 17111696. This contains all the necessary o-rings for the crossover tubes/regulator.
Forum: TPI
11-04-2004, 01:02 AM
Replies: 10
Views: 561
Posted By Brian'sIROC

Yeah, it sounds like you need a cat. Is the...

Yeah, it sounds like you need a cat. Is the original one still on it?
Forum: DIY PROM
11-03-2004, 11:43 PM
Replies: 5
Views: 535
Posted By Brian'sIROC

Am I capable?

I was wondering how much of a programming background do I need in order to program my own chips for my car? I have hardly any programming knowledge whatsoever. I've never programmed anything but my...
Forum: TPI
04-24-2003, 04:21 PM
Replies: 6
Views: 1,627
Posted By Brian'sIROC

What code are you getting?

What code are you getting?
Forum: TPI
04-22-2003, 01:11 PM
Replies: 3
Views: 395
Posted By Brian'sIROC

Since you're replacing the whole harness, might...

Since you're replacing the whole harness, might as well switch over to speed density. That's what I would do.
Forum: Aftermarket Product Review
04-22-2003, 10:17 AM
Replies: 31
Views: 2,400
Posted By Brian'sIROC

I finally welded in my Spohn subframe connectors...

I finally welded in my Spohn subframe connectors this weekend. All I got to say is, it's true what every one says. They make a huge difference. The main thing that I noticed was going over bumpy...
Forum: TPI
04-17-2003, 04:49 PM
Replies: 5
Views: 448
Posted By Brian'sIROC

I havw never had any problems smogging my car...

I havw never had any problems smogging my car with one.
Forum: TPI
04-17-2003, 12:56 PM
Replies: 20
Views: 1,384
Posted By Brian'sIROC

Another vote for Holley here. I had the Crane...

Another vote for Holley here. I had the Crane Cams one before, and wasn't happy with the ease of adjustment. Now it just sits in the toolbox.
Forum: Aftermarket Product Review
04-16-2003, 03:59 PM
Replies: 11
Views: 1,120
Posted By Brian'sIROC

I have em'. They're Blue. They hold water....

I have em'. They're Blue. They hold water. haven't leaked in the past two years. They do get dirty fast though. The kit Summit sells comes with all the hoses for the engine compartment except for the...
Forum: TPI
04-14-2003, 04:59 PM
Replies: 3
Views: 1,104
Posted By Brian'sIROC

I've been running my 19# Accels for about 6...

I've been running my 19# Accels for about 6 months now with no complaints. Price was right.
Forum: Aftermarket Product Review
04-03-2003, 09:14 AM
Replies: 7
Views: 795
Posted By Brian'sIROC

Read this thread before you spend any money: ...

Read this thread before you spend any money:

https://www.thirdgen.org/techbb2/showthread.php?s=&threadid=104792
Forum: Body
04-02-2003, 03:51 PM
Replies: 11
Views: 799
Posted By Brian'sIROC

Thanks for the pic Maniac :)

Thanks for the pic Maniac :)
Forum: Body
04-02-2003, 09:40 AM
Replies: 11
Views: 799
Posted By Brian'sIROC

I live in CA, and it cost me $120 to have it...

I live in CA, and it cost me $120 to have it shipped to the truck terminal. I got the hood through Thunder Racing, they seemed to have the best prices.
I just put on the hood shocks from...
Forum: TPI
03-31-2003, 09:03 AM
Replies: 4
Views: 612
Posted By Brian'sIROC

The line coming out of the EGR should be going...

The line coming out of the EGR should be going into the EGR solenoid, which mounts underneath the coil.
Forum: Body
03-31-2003, 08:53 AM
Replies: 3
Views: 542
Posted By Brian'sIROC

Anybody?

Anybody?
Forum: Body
03-30-2003, 04:01 PM
Replies: 3
Views: 542
Posted By Brian'sIROC

Removing the rear hatch

I just got a rear hatch for my car that has the rear defroster. I can't remove the rear panel from it though. There are like six nuts that hold the rear hatch panel on, but when I try to un-screw the...
Forum: TPI
03-26-2003, 05:22 PM
Replies: 12
Views: 1,482
Posted By Brian'sIROC

If you have a MAF, that could also be your...

If you have a MAF, that could also be your problem. When my MAF went bad the car ran fine until closed loop. 92 Camaro's didn't have a MAF, but I noticed your sig said TPI swap.
Forum: Northern California
03-24-2003, 01:25 PM
Replies: 41
Views: 1,001
Posted By Brian'sIROC

I'm North Bay, but there are a few sites...

I'm North Bay, but there are a few sites dedicated to bay area third gen owners:

http://www.camarobay.com/

this site has a bay area message board:

http://www.3rdgen.org/

Name Sounds...
Forum: Tech / General Engine
03-24-2003, 10:03 AM
Replies: 2
Views: 493
Posted By Brian'sIROC

I'm no too sure, but it may be for some of your...

I'm no too sure, but it may be for some of your your steering column controls. Turn signal, cruise, ignition switch, wipers. I know that there is flatwire running up the column to power/run these...
Forum: Aftermarket Product Review
03-21-2003, 08:59 AM
Replies: 3
Views: 537
Posted By Brian'sIROC

The 31229's are universal, so you have to cut...

The 31229's are universal, so you have to cut them to length and crimp on the terminals. I prefer this because you can route them however you want(especially if you have custom wire looms like me)
...
Forum: Aftermarket Product Review
03-20-2003, 10:54 PM
Replies: 3
Views: 537
Posted By Brian'sIROC

Assuming this is for your TPI. Cap: 8426 ...

Assuming this is for your TPI.

Cap: 8426
Rotor: 8427
Coil: 8226
Custom fit wires w/ 90 degree boots for headers: 31229

These are the parts that I currently have on mine
Forum: TPI
03-20-2003, 10:09 AM
Replies: 5
Views: 505
Posted By Brian'sIROC

If I remember correctly they're M8 X 1.25 threads

If I remember correctly they're M8 X 1.25 threads
Forum: Aftermarket Product Review
03-18-2003, 10:06 AM
Replies: 25
Views: 1,352
Posted By Brian'sIROC

Right now Sears has their "professional" 3 1/2...

Right now Sears has their "professional" 3 1/2 ton with stands and a creeper on sale for like $120.
Forum: TPI
02-26-2003, 01:53 PM
Replies: 8
Views: 901
Posted By Brian'sIROC

Not everyone has an air compressor. No air...

Not everyone has an air compressor. No air compressor, no changing valve seals with the heads on.
Forum: TPI
02-26-2003, 01:46 PM
Replies: 3
Views: 417
Posted By Brian'sIROC

you won't have to disassemble it everytime. You...

you won't have to disassemble it everytime. You may however need to make a custom wrench to fit in there. Here's what I suggest: Grind yourself some extra clearance on the plenum above the adjusting...
Forum: TPI
02-26-2003, 01:38 PM
Replies: 6
Views: 686
Posted By Brian'sIROC

I've heard of people running this cam with the...

I've heard of people running this cam with the stock chip, and not having problems. I would still recommend getting a custom chip eventually to get the most out of your mods. I would be more...
Forum: TPI
02-25-2003, 04:03 PM
Replies: 9
Views: 1,054
Posted By Brian'sIROC

That looks pretty normal to me. i just replaced...

That looks pretty normal to me. i just replaced my injectors, and they bleed off at about the same rate.
Forum: Aftermarket Product Review
02-21-2003, 10:01 AM
Replies: 4
Views: 448
Posted By Brian'sIROC

I've never had a problem with my fuel pressure...

I've never had a problem with my fuel pressure changing with the Holley unit. I think the spring keeps enough tension on it to keep it from moving.
Forum: Tech / General Engine
02-17-2003, 05:29 PM
Replies: 9
Views: 545
Posted By Brian'sIROC

You will need to check with world products(if...

You will need to check with world products(if those are the heads your talking about) to see if those heads will take that much lift with the standard springs and retainers.
Forum: Body
02-17-2003, 05:24 PM
Replies: 6
Views: 500
Posted By Brian'sIROC

My crate was also extremely mangled when I got...

My crate was also extremely mangled when I got it. Fortunately the hood was fine, just a small ding in the very back that I should be able to repair
Forum: Body
02-17-2003, 05:19 PM
Replies: 6
Views: 500
Posted By Brian'sIROC

My car was in an accident, but it was very minor....

My car was in an accident, but it was very minor. The stock hood fits perfect.
Forum: TPI
02-17-2003, 04:27 PM
Replies: 2
Views: 391
Posted By Brian'sIROC

That is the vacuum diaphram for your cruise...

That is the vacuum diaphram for your cruise control. It's what holds the throttle open when you take your foot off the gas.
Forum: Body
02-17-2003, 02:58 PM
Replies: 6
Views: 500
Posted By Brian'sIROC

Anyone with ASCD hood, please enter

Hello everyone,

I just recieved my SS hood in the mail the other day, and have put it on my car. Well, I am not pleased with the way it fits. It says that the hood needs to be "fitted" to the...
Forum: TPI
02-07-2003, 09:33 AM
Replies: 1
Views: 441
Posted By Brian'sIROC

If the car runs fine, I wouldn't worry about it....

If the car runs fine, I wouldn't worry about it. You could always use the injector cleaner that you pour in the gas tank, but removing them is a lot of work to do for a car that runs fine.
Forum: TPI
02-04-2003, 04:08 PM
Replies: 4
Views: 555
Posted By Brian'sIROC

Thanks for the help Vader and 305sbc! The...

Thanks for the help Vader and 305sbc!

The prom has been in for a few years now, so I don't suspect that. I will however re-check my minimum air and TPS, since they were messed with when my MAF was...
Forum: TPI
02-04-2003, 10:48 AM
Replies: 4
Views: 555
Posted By Brian'sIROC

Is there an idle re-learn feature? Does the IAC...

Is there an idle re-learn feature? Does the IAC need to reset?
Forum: TPI
02-03-2003, 09:32 AM
Replies: 4
Views: 555
Posted By Brian'sIROC

Car won't "fast idle"

When I start up my car in the mornings it won't "fast idle" anymore. It used to idle around 1500 RPM for a few minutes when cold, now it just idles at the normal idle speed at start up. How do I get...
Forum: Tech / General Engine
01-28-2003, 11:49 AM
Replies: 4
Views: 662
Posted By Brian'sIROC

If you have a MAF sensor, take a close look at...

If you have a MAF sensor, take a close look at that. If it isn't functioning properly your car will run super rich. I just had this problem. The MAF read O.K. on the scanner. I found the problem when...
Forum: Aftermarket Product Review
01-27-2003, 05:30 PM
Replies: 6
Views: 766
Posted By Brian'sIROC

A ZZ4 cam would be a good choice for a 305. You...

A ZZ4 cam would be a good choice for a 305. You would definately have to change the stock springs out. You can get a ZZ4 cam for $175 from Scoggin Dickey.
Forum: Body
01-24-2003, 10:22 AM
Replies: 5
Views: 689
Posted By Brian'sIROC

Thank you for the reply. I wasn't aware that you...

Thank you for the reply. I wasn't aware that you could sand the plastic pieces. I thought that I would have to use a paint thinner or stripper. That's good to know. I can get a pneumatic D/A sander,...
Forum: Body
01-22-2003, 05:26 PM
Replies: 5
Views: 689
Posted By Brian'sIROC

Anyone know about painting cars?

Anyone know about painting cars?
Forum: Body
01-22-2003, 02:22 PM
Replies: 5
Views: 689
Posted By Brian'sIROC

Prepping plastic body mouldings for paint

Well my car just got hit up front, and I plan on doing all the prepwork myself so that I can put the insurance money torwards a paint job and SS hood. What is the best way to prep the...
Forum: TPI
01-20-2003, 09:55 AM
Replies: 16
Views: 1,242
Posted By Brian'sIROC

I just went through this same ordeal not too long...

I just went through this same ordeal not too long ago. I checked 5 auto parts stores and they all had the universal ones. I ended up going to the dealership and getting the AC delco one. $80 OUCH!
Forum: Aftermarket Product Review
01-15-2003, 11:04 AM
Replies: 5
Views: 1,079
Posted By Brian'sIROC

I also use the made for you centerbolt wire looms...

I also use the made for you centerbolt wire looms with MSD spiral core wires. I thought the looms were a rip-off at first also, but as you said they are money well spent. Also, they look much cleaner...
Forum: Tech / General Engine
01-14-2003, 10:20 AM
Replies: 10
Views: 24,780
Posted By Brian'sIROC

My suburban does the same thing sometimes, but...

My suburban does the same thing sometimes, but the idle goes up and down when it does. Still cant figure it out.
Forum: TPI
01-14-2003, 10:10 AM
Replies: 4
Views: 420
Posted By Brian'sIROC

The diaphram inside could crack or rip

The diaphram inside could crack or rip
Forum: Aftermarket Product Review
01-09-2003, 08:52 AM
Replies: 10
Views: 790
Posted By Brian'sIROC

I've heard that the Super Ram doesn't clear the...

I've heard that the Super Ram doesn't clear the wiper motor. I've also heard that they used to make one for F-bodys that did clear the wiper motor, but it is now discontinued. Also I've been...
Forum: TPI
01-07-2003, 09:50 AM
Replies: 5
Views: 635
Posted By Brian'sIROC

definately replace the fuel filter if you haven't...

definately replace the fuel filter if you haven't done it in a while. Usually stumbling at high RPM is ignition related.
Forum: Tech / General Engine
01-06-2003, 05:19 PM
Replies: 8
Views: 558
Posted By Brian'sIROC

You need to unplug the connector on the...

You need to unplug the connector on the passengers side firewall harness. It's tan w/ a black stripe. Then connect the timing light to #1 wire and battery terminals
Showing results 1 to 50 of 232
 
Page 1 of 5
1
2
3
4
5


 
Forum Jump


All times are GMT -5. The time now is 05:12 PM.