Third Generation F-Body Message Boards

 
Page 1 of 2
1
2
Search: Posts Made By: m23haz
Showing results 1 to 50 of 92
Search took 0.28 seconds.
Forum: Transmissions and Drivetrain
12-23-2003, 02:48 PM
Replies: 21
Views: 1,861
Posted By m23haz

Well I have a T56 and 4.10's and my mileage isnt...

Well I have a T56 and 4.10's and my mileage isnt that bad at all....22-23mpg on the highway. Its at 2000 rpm at 70mph.

That being said though if I had to do it again I would get the 3.73's. ...
Forum: Electronics
12-23-2003, 08:41 AM
Replies: 2
Views: 524
Posted By m23haz

Also when I push the button up nothing happens,...

Also when I push the button up nothing happens, its only when I try to push it down.

Someone has to have some ideas. I need to get this fixed asap.
Forum: Electronics
12-22-2003, 01:08 PM
Replies: 2
Views: 524
Posted By m23haz

Push power window switch....car goes dead??

Ok today when I got in my car I went to put the drivers side window down and when I push the switch it causes a big power drain or surge that shuts the car off. The window doesnt move and the...
Forum: South East Region
10-18-2003, 11:19 PM
Replies: 4
Views: 312
Posted By m23haz

I just moved to Tampa also.....well I went to...

I just moved to Tampa also.....well I went to college here and now that I graduated I decided to stay. I am in North Tampa by USF.
Forum: Transmissions and Drivetrain
09-06-2003, 09:56 PM
Replies: 6
Views: 627
Posted By m23haz

T-56 owners: problems with high idle?

Ever since I hooked up my speedo with the Dakota box my idle has been sticking really high when I push in the clutch and when I come to a stop. It sticks between 1500-2000 rpms when the clutch is...
Forum: Tech / General Engine
07-22-2003, 02:33 PM
Replies: 3
Views: 586
Posted By m23haz

I'm going to bump this up for you as I was about...

I'm going to bump this up for you as I was about to ask the same question. I might be putting on an LT1 intake and while I was at it I was thinking of putting in the ZZ4 cam. I too do not want to...
Forum: Tech / General Engine
07-20-2003, 04:54 PM
Replies: 1
Views: 1,582
Posted By m23haz

Max lift that LT1 valve springs can handle?

I put stock LT1 valve springs on my heads when I put on my Crane Gold rockers a while back but I dont remember what lift these springs are good till.
I have searched but cant find the answer, does...
Forum: Transmissions and Drivetrain
07-04-2003, 12:17 PM
Replies: 21
Views: 3,367
Posted By m23haz

My T56 also whines really loud......I am thinking...

My T56 also whines really loud......I am thinking its a little more beat up than the guy that sold it to me lead me to believe.

My biggest noise though is the banging noise coming from my Spohn...
Forum: TPI
03-05-2003, 05:42 PM
Replies: 16
Views: 755
Posted By m23haz

Millican and others I thought you would find this quite funny!

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2405812613&category=36474


He wants $2000 for this by the way.
Forum: TPI
03-03-2003, 01:40 PM
Replies: 8
Views: 615
Posted By m23haz

I also live in NJ and have had a similar problem....

I also live in NJ and have had a similar problem. My car failed for the same reason except not as bad as yours, it was barely over.
When it failed it was in the summer and the car was close to...
Forum: TPI
02-12-2003, 10:23 PM
Replies: 11
Views: 11,149
Posted By m23haz

The LT4 intake will match up to Vortec heads...

The LT4 intake will match up to Vortec heads right?
Forum: Transmissions and Drivetrain
01-31-2003, 01:21 PM
Replies: 5
Views: 591
Posted By m23haz

Get the LT1 started. It cranks the engine alot...

Get the LT1 started. It cranks the engine alot easier than the 3rd gen starter.
Forum: TPI
12-22-2002, 04:31 PM
Replies: 78
Views: 10,164
Posted By m23haz

Swapmaster when are you planning on doing this...

Swapmaster when are you planning on doing this swap? I am going to do it also but wont be able to until May (when I graduate college after 5 short years:cool: ).

I am interested in finding out...
Forum: TPI
12-21-2002, 10:23 PM
Replies: 78
Views: 10,164
Posted By m23haz

So would using the coolant lines in the back of...

So would using the coolant lines in the back of the head w/ a remote t-stat cause any problems because it wouldnt be flowing backwards like in the LT1 engines?
Or would it just flow like the L98 so...
Forum: TPI
12-21-2002, 01:48 AM
Replies: 78
Views: 10,164
Posted By m23haz

So when you do the swap you use L98 head gaskets...

So when you do the swap you use L98 head gaskets not the LT1 right?

Swapmaster: Why not just modify the heads for that coolant sleeve like in the article and then get the Lt1 intake modified for...
Forum: TPI
12-20-2002, 08:02 PM
Replies: 78
Views: 10,164
Posted By m23haz

So in addition to doing what the article says I...

So in addition to doing what the article says I would also have to fill those holes that overlap in the picture? What if those holes werent filled in, what would happen?
Forum: TPI
12-12-2002, 09:58 AM
Replies: 20
Views: 2,430
Posted By m23haz

I know this isnt the for sale section but thought...

I know this isnt the for sale section but thought it would get seen better here:
My mechanic has a T-Ram that he is looking to sell or trade for a Miniram.
Email me at m23haz@hotmail.com
Forum: TPI
12-10-2002, 11:31 PM
Replies: 3
Views: 591
Posted By m23haz

Probably too much work for Lingenfelter because...

Probably too much work for Lingenfelter because he would have to do alot of work and charge alot for it to make profit. It wouldnt have been profitable for his company to do it but it might be worth...
Forum: TPI
12-06-2002, 05:01 PM
Replies: 78
Views: 10,164
Posted By m23haz

Well since the LT1 intake ports line up to l98...

Well since the LT1 intake ports line up to l98 heads I assume that you could use the TPI on LT1 heads that have been modified to the early style.
Forum: TPI
12-06-2002, 12:38 PM
Replies: 78
Views: 10,164
Posted By m23haz

Are all of the LT1 heads aluminum? I thought...

Are all of the LT1 heads aluminum? I thought that some of them were iron.

Was that $125 price for the head conversion a "favor" to you or is that what others should expect as far as amount of...
Forum: TPI
12-05-2002, 08:31 PM
Replies: 78
Views: 10,164
Posted By m23haz

These heads make great power on the LT1 cars when...

These heads make great power on the LT1 cars when ported. I think if I find a cheap set I might go for this.

86 Iroc: Did the heads increase power for you? Any track times or dyno or anything?
Forum: TPI
12-05-2002, 07:47 PM
Replies: 78
Views: 10,164
Posted By m23haz

John if you can put LT1 heads on pre-93 blocks...

John if you can put LT1 heads on pre-93 blocks then would the intake still have to be modified to fit?
Forum: TPI
12-04-2002, 05:55 PM
Replies: 13
Views: 849
Posted By m23haz

Ok I know people have had problems. I have...

Ok I know people have had problems.

I have only seen 2 people who have had good results with data to prove it like track times (the guy this week and John himself). Who else has a functional...
Forum: TPI
12-04-2002, 11:03 AM
Replies: 13
Views: 849
Posted By m23haz

Since there are reported problems with the LT1 Intake swap.....

Lets hear who has had problems with the LT1 Intake swap and what those problems were.

Lets also hear who has had success with the swap.

Post your LT1 intake combos so we know what works and...
Forum: Aftermarket Product Review
12-01-2002, 07:52 PM
Replies: 23
Views: 4,379
Posted By m23haz

I have the Accel wires with the sleeves on them. ...

I have the Accel wires with the sleeves on them. They were around $100 or so. I have Edelbrock headers and have no problems with them so far. I did have the cheaper Accels before and they burned. ...
Forum: Auto Detailing and Appearance
11-30-2002, 11:21 PM
Replies: 18
Views: 846
Posted By m23haz

I believe those are the vette rims.....thought...

I believe those are the vette rims.....thought about them myself.
Forum: TPI
11-07-2002, 12:08 PM
Replies: 21
Views: 2,655
Posted By m23haz

Well I was planning on porting them if I got them...

Well I was planning on porting them if I got them obviously. I know that stock they cant handle the CC305 range. How much porting needs to be done to get them to flow good enough to put down decent...
Forum: TPI
11-05-2002, 01:35 PM
Replies: 10
Views: 4,952
Posted By m23haz

My mechanic had one laying around so I put it in...

My mechanic had one laying around so I put it in to see if it would help.......NOPE, NOTHING, ZERO, ZILCH. It is a waste of time if you ask me. Oh and I had a Hypertech chip too when I bought the...
Forum: TPI
11-05-2002, 01:17 AM
Replies: 21
Views: 2,655
Posted By m23haz

I wish I could run mid 13's:( The best run I...

I wish I could run mid 13's:(
The best run I ever had was 13.9@99 with a 1.99 60ft. I cant ever hook up. My tranny isnt in the best shape so that is why I am swapping in the T56. Hopefully it...
Forum: TPI
11-04-2002, 09:35 PM
Replies: 21
Views: 2,655
Posted By m23haz

I want ported L98's, cc305, LT1 intake... I...

I want ported L98's, cc305, LT1 intake...
I have a T-56 and 4.10's going in next month.
There is no way I can use the CC306, I live in NJ and have to pass emissions.
Forum: TPI
11-04-2002, 07:26 PM
Replies: 21
Views: 2,655
Posted By m23haz

WOW:eek: You put the CC306 in with a stock TPI?...

WOW:eek: You put the CC306 in with a stock TPI? Any plans to upgrade? Why did you do that?
Forum: TPI
11-04-2002, 04:35 PM
Replies: 21
Views: 2,655
Posted By m23haz

Thanks Chris. I know what the LT1 cars run with...

Thanks Chris. I know what the LT1 cars run with it. I am wondering if anyone knows if this cam is a good match for these heads?
Chris, how long till you get it running? I am eager to know how it...
Forum: TPI
11-04-2002, 12:49 PM
Replies: 21
Views: 2,655
Posted By m23haz

Anyone with extensive knowledge of the L98 heads...

Anyone with extensive knowledge of the L98 heads here? I know alot of people run them.
Thanks guys
Forum: TPI
11-04-2002, 10:20 AM
Replies: 21
Views: 2,655
Posted By m23haz

Would the CC305 cam work well with ported L98 Al. Heads and LT1?

I am thinking about putting a 355 combo together. I will be using an LT1 intake, and I want to use the ZZ4/3 L98 Aluminum Vette Heads with a CC305 cam.
Will this cam work well with the L98 Al....
Forum: TPI
11-04-2002, 10:07 AM
Replies: 2
Views: 377
Posted By m23haz

I believe that they DO NOT have EGR.

I believe that they DO NOT have EGR.
Forum: TPI
09-25-2002, 12:00 PM
Replies: 10
Views: 1,152
Posted By m23haz

You didnt say that you had a SteathRam....You...

You didnt say that you had a SteathRam....You said TPI.

Sorry for the mistake.
Forum: TPI
09-24-2002, 04:27 PM
Replies: 10
Views: 1,152
Posted By m23haz

Thats quite a bit of cam for the TPI dont you...

Thats quite a bit of cam for the TPI dont you think?
Forum: TPI
09-20-2002, 01:07 PM
Replies: 11
Views: 881
Posted By m23haz

Thanks guys.....as long as there is hope I think...

Thanks guys.....as long as there is hope I think I am going to try it:D
Forum: TPI
09-19-2002, 05:44 PM
Replies: 11
Views: 881
Posted By m23haz

John, We dont have a visual inspection under the...

John, We dont have a visual inspection under the hood. Do you honestly think that it could pass with an LT1, AFR's, and a CC305 cam with proper tuning?
Forum: TPI
09-19-2002, 12:20 AM
Replies: 11
Views: 881
Posted By m23haz

LT1 and Emissions: anybody deal with this yet?

So I did a search and I found alot of ideas on whether or not the LT1 intake would pass emissions but no hard evidence. Millican says that it wont.
I want one BAD but I live in NJ:( Has anyone...
Forum: Transmissions and Drivetrain
09-10-2002, 11:20 AM
Replies: 10
Views: 773
Posted By m23haz

ZBRA had trouble with one a while ago and there...

ZBRA had trouble with one a while ago and there was a thread about what to do about it. Do a search and find that post...it will help.
Forum: Transmissions and Drivetrain
09-03-2002, 01:14 AM
Replies: 11
Views: 575
Posted By m23haz

You cant use the LS1 t-56. You need one from...

You cant use the LS1 t-56. You need one from 93-97.
Forum: Aftermarket Product Review
08-01-2002, 01:09 AM
Replies: 40
Views: 4,340
Posted By m23haz

Craiger: will you please email me at ...

Craiger: will you please email me at m23haz@hotmail.com
Your email is not listed.
Thanks
Mike
Forum: TPI
05-30-2002, 04:24 PM
Replies: 26
Views: 711
Posted By m23haz

Thats why there are so many fast Mustangs around....

Thats why there are so many fast Mustangs around. In one day my friends 5.0 went from a 14.2 car to a 12.8 car, literally, with a head and cam swap. NOTHING ELSE. NO CHIP NEEDED! Why? Because it...
Forum: Transmissions and Drivetrain
05-29-2002, 08:32 PM
Replies: 2
Views: 420
Posted By m23haz

Dont worry bro you are right. The yellow and...

Dont worry bro you are right. The yellow and purple are for 88 and older cars. You have the right ones. Run them to the switch behind the clutch pedal (the one that hits when the pedal is pressed...
Forum: Transmissions and Drivetrain
05-29-2002, 12:42 PM
Replies: 2
Views: 334
Posted By m23haz

My T56 will have to wait even longer..

So I was all ready to do the swap and the guy who is doing it for me broke his hip. He cant walk for 12 weeks which means I cant do the swap. I am going back to school in August so who knows when I...
Forum: TPI
05-26-2002, 02:28 PM
Replies: 12
Views: 628
Posted By m23haz

Kevin that is a very generous offer and I thank...

Kevin that is a very generous offer and I thank you. I wont be able to make it there this weekend but hopefully we can meet up some time this summer. I dont even have the T56 in yet. I will get the...
Forum: Transmissions and Drivetrain
05-26-2002, 12:03 PM
Replies: 7
Views: 505
Posted By m23haz

For a price like that I wouldnt hesitate. The...

For a price like that I wouldnt hesitate. The only reason that people dont like the 93 is because the 6th gear is steeper than the later years.
Forum: North East Region
05-25-2002, 11:02 PM
Replies: 1
Views: 338
Posted By m23haz

Anyone burn PROMS in NJ/PA area for a fee?

Anyone burn Proms for a fee in the NJ/PA area (south Jersey here, just outside of Atlantic City)???

Just curious because I might need one.

email me at: m23haz@hotmail.com
Forum: TPI
05-25-2002, 10:53 PM
Replies: 12
Views: 628
Posted By m23haz

Actually you are kinda right Kevin, with me its...

Actually you are kinda right Kevin, with me its more about the time then the actual cost of getting the equipment. I go to school full time, work, and have a serious girlfriend. I just dont have...
Showing results 1 to 50 of 92
 
Page 1 of 2
1
2


 
Forum Jump


All times are GMT -5. The time now is 11:18 AM.