Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

Car Jumps When Put in Gear?????

Thread Tools
 
Search this Thread
 
Old 10-19-2008, 12:10 PM
  #1  
Member
Thread Starter
 
fearthisinc's Avatar
 
Join Date: Oct 2008
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
Car Jumps When Put in Gear?????

Ok. So I have an automatic 1987 Chevy Camaro Iroc. The engine was originally a 305 however the previous owner had a Chevy dealership install a 350. The car has 160,000 miles on it and from what the previous owner said the tranny was rebuilt at 120,000. Here is the deal. The car runs and drives and handles great however when I put the car into reverse, neutral, drive, etc the car "jumps" if that is the right word...also when going slower speeds and the car shifts i feel the jump.. its a very hard shift.. just wondering if this is normal or what the problem is. Thanks
Old 10-19-2008, 01:27 PM
  #2  
Member
iTrader: (3)
 
steeljab's Avatar
 
Join Date: Jan 2007
Posts: 188
Likes: 0
Received 0 Likes on 0 Posts
Car: 87' Camaro
Engine: 305 carbed
Transmission: 700r4
Axle/Gears: 2.73
Re: Car Jumps When Put in Gear?????

i think thats just torque for ya, my stock lg4 (dead now, awaiting new motor) always did that, well not the shifting part, but yeah whats it idle at? mine idled at about 800-1000
Old 10-19-2008, 01:40 PM
  #3  
Member

iTrader: (2)
 
vette9190's Avatar
 
Join Date: Mar 2002
Location: Lowell, In
Posts: 346
Likes: 0
Received 1 Like on 1 Post
Car: 1991 Chevy Camaro RS
Engine: 350 TPI
Transmission: 700R4,
Axle/Gears: 3.73 w/SLP Zexel Torsen Limited Sli
Re: Car Jumps When Put in Gear?????

What's the idle at? A high idle could cause that sensation when putting it in gear.

Also how posative are you its a 350? I can't tell how many times I've been told "it's got a 350" only to find out its a 305 later.
Old 10-19-2008, 01:46 PM
  #4  
Member
Thread Starter
 
fearthisinc's Avatar
 
Join Date: Oct 2008
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
Re: Car Jumps When Put in Gear?????

I believe it is idling at about 5,000 - 6,000 rpms.... like i said it feels like a jump or rather feels like the car has some kind of kick to it or something.. it definately feels like its from the rear and is like a dip or something occurs.. its hard to explain.. i just wasnt sure if the transmission or something like that was going and was going to need replacing or something.. i mean im am really only used to driving newer cars.. this is my first project car and first car that was purchased that wasnt brand new.. so maybe i am too used to shifting being so smooth but just wanted to make sure it wasnt something more serious...

Also I have paperwork from the dealership that installed the engine that states its a 350. Also on the engine itself on the sticker it says 350 and i just have to find out where to get the numbers off of the engine so I can verify on that one site what kind of engine it is. But I do have a warranty booklet and whatnot from the Dealership that installed it.
Old 10-19-2008, 02:11 PM
  #5  
Supreme Member

 
Supervisor42's Avatar
 
Join Date: Jul 2005
Location: Arab, Alabama
Posts: 1,675
Likes: 0
Received 3 Likes on 3 Posts
Car: 1988 Trans Am GTA
Engine: 350 4BBL
Transmission: 700R4
Axle/Gears: 3.27
Re: Car Jumps When Put in Gear?????

Originally Posted by fearthisinc
I believe it is idling at about 5,000 - 6,000 rpms....
...idling at about 5,000 - 6,000 rpms
Check your motor mounts and transmission mount. I'll bet you find worn-out 20 year-old rubber and the source of your problem...
Old 10-19-2008, 02:17 PM
  #6  
Member
 
BladeX10's Avatar
 
Join Date: Jul 2008
Posts: 279
Likes: 0
Received 0 Likes on 0 Posts
Car: 1991 RS v8
Re: Car Jumps When Put in Gear?????

If my car was idling at 5-6k rpms.. I wouldnt even attempt to drive it..
Old 10-19-2008, 11:02 PM
  #7  
Member
Thread Starter
 
fearthisinc's Avatar
 
Join Date: Oct 2008
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
Re: Car Jumps When Put in Gear?????

woooooooooopppps lol.. not sure what I was thinking about there lolololol.. i meant 500-600 lol....
Old 10-20-2008, 04:14 AM
  #8  
Supreme Member

iTrader: (5)
 
Viprklr's Avatar
 
Join Date: Feb 2002
Location: N. Illinois
Posts: 3,461
Likes: 0
Received 2 Likes on 2 Posts
Car: 92 GTA/ 00 TA
Engine: 383/350
Transmission: 700R4/T-56
Re: Car Jumps When Put in Gear?????

Originally Posted by Supervisor42
..mounts and transmission mount. I'll bet you find worn-out 20 year-old rubber and the source of your problem...
One of mine did that. I found that I had a broken trans mount.
Old 10-20-2008, 07:59 AM
  #9  
Senior Member
 
kcb37's Avatar
 
Join Date: Jan 2008
Posts: 612
Likes: 0
Received 0 Likes on 0 Posts
Re: Car Jumps When Put in Gear?????

I would check your mounts, it also depends on how much it jumps.
My 83 1/2 with a 305 did too. But it was more like a little nudge, from the torque of the engine.
Also part of it driving could be a shift kit.
Old 10-20-2008, 03:41 PM
  #10  
Moderator

 
Apeiron's Avatar
 
Join Date: Jan 2000
Location: Mercedes Norte, Heredia, Costa Rica
Posts: 20,981
Likes: 0
Received 9 Likes on 8 Posts
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: Car Jumps When Put in Gear?????

Earlier 700R4s don't have the auxiliary valvebody with the forward and reverse accumulators to soften the shift into gear.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wade787b
TPI
2
09-29-2015 01:15 PM
mizz0313
Transmissions and Drivetrain
3
08-12-2015 06:45 AM
dhonda200
Transmissions and Drivetrain
6
08-11-2015 11:50 PM
hokis
Transmissions and Drivetrain
9
08-09-2015 03:57 PM



Quick Reply: Car Jumps When Put in Gear?????



All times are GMT -5. The time now is 03:31 PM.