Aftermarket Product Review Provide questions and answers about aftermarket parts for the Third Generation F-Body.

Custom Chips Inc review

Old Nov 23, 2016 | 12:16 AM
  #1  
spelosi77's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2012
Posts: 4
Likes: 0
Custom Chips Inc review

I had been struggling with code 32 (EGR) on my 1991 5.7L Camaro Z28 1LE since I purchased the car 4 years ago.

I replaced the EGR valve (which was a PITA since I didn't have any experience with TPI plenum removal) and that seemed to help for about 6 months but then the SES light came on and to my displeasure it was code 32 again.

I had the car looked at by a local mechanic and he said the solenoid checked out fine. The mechanic performed a scheduled tune-up and the cleared the code from the ECU. I drove around SES light free for almost a year. A few weeks ago, the SES light came on again. Code 32 ...

I did some searching and came across Custom Chips Inc facebook page (https://www.facebook.com/Custom-Chip...9489875293854/). I called Custom Chips Inc and left a message. My call was returned within 1 hour. I was able to order a custom chip (with the following modifications: No VATS, No EGR, Converter stall adjustment, and performance tune) right there on the phone for the very reasonable price of $76.

The chip took about a week to arrive, and the install was straight forward. The install required a moates adapter (purchased from moates), but that's standard for all aftermarket chips.

I've been driving around with this chip for a few weeks now. The SES light has stayed off. That's the main reason I wanted the chip. The added performance is a big bonus. The car has a lot more grunt down low, and the seat-of-the-pants feel is a lot better. It is regularly breaking the tires loose and there's also a lot more passing power on the highway.

I highly recommend Custom Chips Inc.
Reply
Old Nov 23, 2016 | 01:45 AM
  #2  
89-S-dime's Avatar
Member
10 Year Member
iTrader: (3)
 
Joined: Apr 2014
Posts: 103
Likes: 5
From: Long Beach, CA
Engine: 350 TBI build
Transmission: 700R4
Axle/Gears: 3.73 G80
Re: Custom Chips Inc review

Originally Posted by spelosi77
I had been struggling with code 32 (EGR) on my 1991 5.7L Camaro Z28 1LE since I purchased the car 4 years ago.

I replaced the EGR valve (which was a PITA since I didn't have any experience with TPI plenum removal) and that seemed to help for about 6 months but then the SES light came on and to my displeasure it was code 32 again.

I had the car looked at by a local mechanic and he said the solenoid checked out fine. The mechanic performed a scheduled tune-up and the cleared the code from the ECU. I drove around SES light free for almost a year. A few weeks ago, the SES light came on again. Code 32 ...

I did some searching and came across Custom Chips Inc facebook page (https://www.facebook.com/Custom-Chip...9489875293854/). I called Custom Chips Inc and left a message. My call was returned within 1 hour. I was able to order a custom chip (with the following modifications: No VATS, No EGR, Converter stall adjustment, and performance tune) right there on the phone for the very reasonable price of $76.

The chip took about a week to arrive, and the install was straight forward. The install required a moates adapter (purchased from moates), but that's standard for all aftermarket chips.

I've been driving around with this chip for a few weeks now. The SES light has stayed off. That's the main reason I wanted the chip. The added performance is a big bonus. The car has a lot more grunt down low, and the seat-of-the-pants feel is a lot better. It is regularly breaking the tires loose and there's also a lot more passing power on the highway.

I highly recommend Custom Chips Inc.
Is that you John Wayne?
Reply
Old Nov 23, 2016 | 06:54 AM
  #3  
TTOP350's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (9)
 
Joined: Oct 2001
Posts: 12,211
Likes: 1,135
From: Il
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Custom Chips Inc review

Sure looks like it...
Reply
Old Nov 23, 2016 | 11:10 AM
  #4  
thtanner's Avatar
Supreme Member
iTrader: (1)
 
Joined: May 2015
Posts: 1,154
Likes: 89
From: Temecula, CA
Car: 1989 Pontiac Formula 350
Engine: L98
Transmission: 700R4
Axle/Gears: BorgWarner 3.27 Posi
Re: Custom Chips Inc review

He's been trying to sneak in all of the Facebook groups lately.

Why would anyone try to use a vendor that has such known rate of issues/scams/whatnot is beyond me.

I always google before I buy! It does show how persistent he is, though. I guess that's commendable on some sort of level.
Reply
Old Nov 23, 2016 | 12:51 PM
  #5  
1987L69's Avatar
Member
 
Joined: Aug 2015
Posts: 126
Likes: 0
From: Key West, FL
Car: 1984 Z28
Engine: LG4 305/4bbl for now
Transmission: 5-Speed
Axle/Gears: 3.23 Posi
Re: Custom Chips Inc review

I tried to get a chip from him for my old 87 Monte Carlo SS, he took my money and nevery provided a chip to me, went on for about 6 months then he quit answering my calls and messages, very very very hard lesson to learn......

Last edited by 1987L69; Nov 23, 2016 at 01:40 PM.
Reply
Old Nov 23, 2016 | 01:36 PM
  #6  
mrestrictrplate's Avatar
Member
iTrader: (2)
 
Joined: Nov 2013
Posts: 297
Likes: 0
From: Freehold NJ
Car: 87 Iroc 5.7,67 SS Camaro,90 Formula
Engine: 355 AFR Superram LPE 219
Transmission: 700r4 3000 stall 4spd 5 spd
Axle/Gears: 3.27
Re: Custom Chips Inc review

I got ripped of by him earlier this year. He writes a touching testimonial doesn't he..Touches himself me thinks....
Reply
Old Nov 23, 2016 | 04:16 PM
  #7  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,694
Likes: 979
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Custom Chips Inc review

Looks like you got lucky receiving your tune.
Oscar sabastian doesn't have a very good track record.
https://www.thirdgen.org/forums/esp_...stian+&type=wp
Reply
Old Aug 12, 2017 | 02:11 PM
  #8  
Richard Cosner's Avatar
Junior Member
 
Joined: Nov 2015
Posts: 22
Likes: 0
From: Bethlehem, PA
Car: 1989 Pontiac TransAm GTA
Engine: 350
Re: Custom Chips Inc review

I just "ordered" a chip from Custom Chips Inc.... wish I would have come here first. I paid on the 31st of July via Western Union (That should have been my first tip off), I got the email notification that the money was picked up and gone within 45 minutes...

Here I am 2 weeks later with no chip, and I doubt I will ever see one. I asked 3 times for an update and its always "I will check" then, he promptly forgets who the hell you even are. No apologies nothing...

Someone needs to report him for mail fraud.

There were red flags and I just ignored them.... he didn't ask certain question that he needed to know... then when I remember he needed to know them, I messaged him with the info and he was like "I know" ....
Reply
Old Aug 12, 2017 | 03:32 PM
  #9  
thtanner's Avatar
Supreme Member
iTrader: (1)
 
Joined: May 2015
Posts: 1,154
Likes: 89
From: Temecula, CA
Car: 1989 Pontiac Formula 350
Engine: L98
Transmission: 700R4
Axle/Gears: BorgWarner 3.27 Posi
Re: Custom Chips Inc review

I have a feeling this is paying for some guys drug problem.

Sorry to hear Richard.

Check out www.scotthansen.net for TPI tuning
Reply
Old Sep 10, 2017 | 07:05 PM
  #10  
Ibazzabar92's Avatar
Banned
 
Joined: May 2017
Posts: 19
Likes: 1
From: Fort Worth, TX
Car: 1992 RS/89 Formula
Engine: 305 TBI/350 TPI
Transmission: auto
Axle/Gears: 2.73/3.08
Re: Custom Chips Inc review

I actually ordered from Custom Chips and I am happy with my chip, the car accelerates faster and runs smoother . It does what it says! Yes I had to wait 2 weeks for it and that part I was not happy about but the product is decent. I had a hard time finding anyone that still does these older TPI cars. Overall I do recommend them. Just my 2 cents
Reply
Old Sep 10, 2017 | 07:38 PM
  #11  
thtanner's Avatar
Supreme Member
iTrader: (1)
 
Joined: May 2015
Posts: 1,154
Likes: 89
From: Temecula, CA
Car: 1989 Pontiac Formula 350
Engine: L98
Transmission: 700R4
Axle/Gears: BorgWarner 3.27 Posi
Re: Custom Chips Inc review

Originally Posted by Ibazzabar92
I actually ordered from Custom Chips and I am happy with my chip, the car accelerates faster and runs smoother . It does what it says! Yes I had to wait 2 weeks for it and that part I was not happy about but the product is decent. I had a hard time finding anyone that still does these older TPI cars. Overall I do recommend them. Just my 2 cents
There are more than enough legit TPI mail tuners to negate the need to deal with a known scammer. Butt-dynos also mean nothing in the grand scheme of things.

www.scotthansen.net is legit. Anyone looking for TPI tuning should avoid people with bad reps.
Reply
Old Sep 10, 2017 | 10:31 PM
  #12  
89-S-dime's Avatar
Member
10 Year Member
iTrader: (3)
 
Joined: Apr 2014
Posts: 103
Likes: 5
From: Long Beach, CA
Engine: 350 TBI build
Transmission: 700R4
Axle/Gears: 3.73 G80
Re: Custom Chips Inc review

Originally Posted by Ibazzabar92
I actually ordered from Custom Chips and I am happy with my chip, the car accelerates faster and runs smoother . It does what it says! Yes I had to wait 2 weeks for it and that part I was not happy about but the product is decent. I had a hard time finding anyone that still does these older TPI cars. Overall I do recommend them. Just my 2 cents
are you the same guy that was trying to sell a performance chip for a 86-89 TPI a few months back?
https://www.thirdgen.org/forums/engi...p-86-89-a.html

Reply
Old Sep 10, 2017 | 11:01 PM
  #13  
Jimmy90z's Avatar
Junior Member
 
Joined: Jun 2017
Posts: 5
Likes: 0
From: Baton Rouge, LA
Car: 92 Camaro RS
Engine: 305
Transmission: auto
Re: Custom Chips Inc review

Got one for my Camaro last year. Worked out pretty good. Feels faster and made more power than the aftermarket chip the PO had in there when I bought the car. I paid $76 shipped for it. It didnt come with instructions so I messaged him and he walked me through the install. It wasnt hard at all.
Reply
Old Sep 17, 2017 | 12:28 AM
  #14  
articwhiteZ's Avatar
Supreme Member
15 Year Member
iTrader: (56)
 
Joined: Sep 2009
Posts: 3,776
Likes: 101
From: Spokane WA
Car: 92 Lingenfelter Z28 articwhite
Engine: Aluminum 615BBC
Transmission: Th400wbrake/curri entps9" locker
Axle/Gears: 4.11/4.30/4.56
Re: Custom Chips Inc review

Originally Posted by 89-S-dime
are you the same guy that was trying to sell a performance chip for a 86-89 TPI a few months back?
https://www.thirdgen.org/forums/engi...p-86-89-a.html

Reply
Old Sep 19, 2017 | 08:28 AM
  #15  
Tootie Pang's Avatar
Supreme Member
15 Year Member
iTrader: (2)
 
Joined: Aug 2009
Posts: 1,972
Likes: 127
From: Los Angeles
Car: 1989 IROC Convertible
Engine: 350 TPI L98
Transmission: WC T5
Axle/Gears: 3.42
Re: Custom Chips Inc review

Leaning towards www.scotthansen.net.

Would like to get the EGR disabled, VATS disabled, and the inijector tables for Bosch D3s in.

Bonus- maybe he can do a Park-Neutral and WOT permissive output on an unused pin of the ECU for a nitrous setup. :-)
Reply
Old Sep 19, 2017 | 11:24 AM
  #16  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,694
Likes: 979
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Custom Chips Inc review

It's a shame people keep getting ripped off bye not receiving what they paid for.
Keeping this thread alive to keep people informed of oscars deception .
Not to bad mouth Scott Hansen but I have seen a few of his modified v6 memcal to work on v8. He is not jumping the cylinder select correctly this will cause slight running issues.
https://www.thirdgen.org/forums/diy-...ification.html
Im not sure he changes the offsets just flow rate.
https://www.thirdgen.org/forums/diy-...vette-tpi.html
Originally Posted by MrWillys
If you have Bosch Yellows from FIC you are running lean. Either 0280-155-700 or 0280-155-710 should not be used and do not flow 22 lbs. Change your flowrate to 20 and it will run okay!

Last edited by Tuned Performance; Sep 19, 2017 at 11:56 AM. Reason: Cyl select link, flow rate info
Reply
Old Nov 8, 2017 | 11:02 AM
  #17  
89-S-dime's Avatar
Member
10 Year Member
iTrader: (3)
 
Joined: Apr 2014
Posts: 103
Likes: 5
From: Long Beach, CA
Engine: 350 TBI build
Transmission: 700R4
Axle/Gears: 3.73 G80
Re: Custom Chips Inc review

I was notified by facebook that Custom Chips Inc. has changed their name to:
"F-body ECM Programming"

please spread the word

Last edited by 89-S-dime; Nov 8, 2017 at 11:16 AM.
Reply
Old Nov 8, 2017 | 06:22 PM
  #18  
CHRISMAN2000's Avatar
Member
iTrader: (1)
 
Joined: Feb 2002
Posts: 431
Likes: 0
From: Winnipeg,MB
Car: 1991 Camaro Z28
Engine: 350 L98
Transmission: 700R4
Re: Custom Chips Inc review

Yeah and no offence to any member on the board that only has like 5pr less posts touting about this business is suspect.

Anybody who gets ripped off needs to report this guy.
Reply
Old Jan 24, 2018 | 01:43 AM
  #19  
BluFBdy's Avatar
Supreme Member
15 Year Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 2,179
Likes: 1
From: Port Orchard,WA
Car: 89 Camaro RS
Engine: 355 SD TPI
Transmission: WCT5
Axle/Gears: 3.08 Posi
Re: Custom Chips Inc review

Originally Posted by 89-S-dime
I was notified by facebook that Custom Chips Inc. has changed their name to:
"F-body ECM Programming"

please spread the word

he has also ditched the John Wayne bs for "Johnny Bgood"
Reply
Old Jun 28, 2018 | 01:59 PM
  #20  
budfreak1's Avatar
Senior Member
20 Year Member
iTrader: (7)
 
Joined: May 2005
Posts: 728
Likes: 1
From: Toronto, Ohio
Car: 1991 Trans Am GTA
Engine: 355
Transmission: 4L60
Axle/Gears: 4th gen 10 bolt 3.42 posi
Re: Custom Chips Inc review

John Wayne is at it still. Claims to have no bad reviews and threatened to sue me for defamation, lmao! I shut his *** down with the reviews from here. He deleted his link to his chips for sale right after, lol.






Reply
Old Jun 28, 2018 | 02:14 PM
  #21  
budfreak1's Avatar
Senior Member
20 Year Member
iTrader: (7)
 
Joined: May 2005
Posts: 728
Likes: 1
From: Toronto, Ohio
Car: 1991 Trans Am GTA
Engine: 355
Transmission: 4L60
Axle/Gears: 4th gen 10 bolt 3.42 posi
Re: Custom Chips Inc review

BWahahahahahahahahahaha!!! This dude is seriously so butthurt now that he is trying to claim I've messaged his 13 year old daughter, and I didn't even know he had a kid! He's a seriously sick, low piece of ****.
Reply
Old Jun 28, 2018 | 02:25 PM
  #22  
budfreak1's Avatar
Senior Member
20 Year Member
iTrader: (7)
 
Joined: May 2005
Posts: 728
Likes: 1
From: Toronto, Ohio
Car: 1991 Trans Am GTA
Engine: 355
Transmission: 4L60
Axle/Gears: 4th gen 10 bolt 3.42 posi
Re: Custom Chips Inc review

Come lay some truth on him, guys.
https://www.facebook.com/photo.php?f...&theater&ifg=1
Reply
Old Jun 28, 2018 | 02:28 PM
  #23  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,694
Likes: 979
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Custom Chips Inc review

Your link is just to a underhood image. Can’t believe this guy is still at it.
Reply
Old Jun 28, 2018 | 03:12 PM
  #24  
budfreak1's Avatar
Senior Member
20 Year Member
iTrader: (7)
 
Joined: May 2005
Posts: 728
Likes: 1
From: Toronto, Ohio
Car: 1991 Trans Am GTA
Engine: 355
Transmission: 4L60
Axle/Gears: 4th gen 10 bolt 3.42 posi
Re: Custom Chips Inc review

Originally Posted by Tuned Performance
Your link is just to a underhood image. Can’t believe this guy is still at it.
You should be able to click on it and read the comments for it, but it's too late now because OP deleted it. Yeah, he's still at it. He just sticks to small F body groups with 500 people or so in them, so less chance of being busted by someone like me. He went completely off the wall after I busted him and claimed I messaged his 13 year old daughter, saying I sent her sexual messages and pictures and was reporting me and calling cops and all this wild ****. I never seen somebody stoop so low over being busted as to drag his kid into it and make claims like that. I have screenshots, and I'm seriously considering suing him for defamation.
Reply
Old Jun 29, 2018 | 11:20 AM
  #25  
Ibazzabar92's Avatar
Banned
 
Joined: May 2017
Posts: 19
Likes: 1
From: Fort Worth, TX
Car: 1992 RS/89 Formula
Engine: 305 TBI/350 TPI
Transmission: auto
Axle/Gears: 2.73/3.08
Re: Custom Chips Inc review

We bought one a year or so back for my wife's 89 C4 Corvette and it worked really well. had him delete code 32 and 9th injector. Sounds like you have a personal beef with the guy. It was packed well and came in a little less than a week? anyhow, I would use them again. Did what it said and car does perform a lot better.
Reply
Old Oct 6, 2023 | 11:00 AM
  #26  
BackInBlack86's Avatar
Member
20 Year Member
 
Joined: Nov 2003
Posts: 189
Likes: 1
From: Elkhart, IN, USA
Car: 77 K20 80 K2500 93 C2500 94 K1500
Engine: 350 350 454 350
Transmission: 350 465 80E 60E
Axle/Gears: 4.10 3.73 5.13 3.73
Re: Custom Chips Inc review

Originally Posted by BluFBdy
he has also ditched the John Wayne bs for "Johnny Bgood"
he's switched again to John BG
Reply
Old Feb 21, 2025 | 09:16 PM
  #27  
Bob284's Avatar
Junior Member
 
Joined: Feb 2025
Posts: 1
Likes: 0
From: Houston
Car: Camaro
Engine: 350
Transmission: 700
Axle/Gears: 3.42
Re: Custom Chips Inc review

Originally Posted by BackInBlack86
he's switched again to John BG
i ordered a chip from him
last year for my 89 TPI and it worked really good. I would order again if I had to.
Reply
Old Feb 21, 2025 | 09:20 PM
  #28  
BluFBdy's Avatar
Supreme Member
15 Year Member
iTrader: (1)
 
Joined: Sep 2007
Posts: 2,179
Likes: 1
From: Port Orchard,WA
Car: 89 Camaro RS
Engine: 355 SD TPI
Transmission: WCT5
Axle/Gears: 3.08 Posi
Re: Custom Chips Inc review

Originally Posted by BackInBlack86
he's switched again to John BG
Update: Going by John Bigelowe and now he's using a rip off of tunedperformances advertisement from a few years back to try and appear legitimate

Last edited by BluFBdy; Feb 21, 2025 at 09:24 PM.
Reply
Old Feb 21, 2025 | 09:25 PM
  #29  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,694
Likes: 979
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Custom Chips Inc review

Originally Posted by Bob284
i ordered a chip from him
last year for my 89 TPI and it worked really good. I would order again if I had to.
seems odd you just joined ?
Reply
Old Feb 21, 2025 | 10:14 PM
  #30  
BackInBlack86's Avatar
Member
20 Year Member
 
Joined: Nov 2003
Posts: 189
Likes: 1
From: Elkhart, IN, USA
Car: 77 K20 80 K2500 93 C2500 94 K1500
Engine: 350 350 454 350
Transmission: 350 465 80E 60E
Axle/Gears: 4.10 3.73 5.13 3.73
Re: Custom Chips Inc review

Originally Posted by BluFBdy
Update: Going by John Bigelowe and now he's using a rip off of tunedperformances advertisement from a few years back to try and appear legitimate
I actually caught him as Chris Bigelowe in a couple truck groups.
Reply
Old Feb 21, 2025 | 10:15 PM
  #31  
BackInBlack86's Avatar
Member
20 Year Member
 
Joined: Nov 2003
Posts: 189
Likes: 1
From: Elkhart, IN, USA
Car: 77 K20 80 K2500 93 C2500 94 K1500
Engine: 350 350 454 350
Transmission: 350 465 80E 60E
Axle/Gears: 4.10 3.73 5.13 3.73
Re: Custom Chips Inc review

Originally Posted by Tuned Performance
seems odd you just joined ?
and this is the one and only post made... Hi Oscar!
Reply
Old Feb 23, 2025 | 06:31 PM
  #32  
stew'86MCSS396's Avatar
Member
20 Year Member
 
Joined: Sep 2002
Posts: 253
Likes: 25
From: honolulu
Car: '86MCSS
Engine: 396 .030"
Transmission: M20
Re: Custom Chips Inc review

Originally Posted by Ibazzabar92
We bought one a year or so back for my wife's 89 C4 Corvette and it worked really well. had him delete code 32 and 9th injector. Sounds like you have a personal beef with the guy. It was packed well and came in a little less than a week? anyhow, I would use them again. Did what it said and car does perform a lot better.
Sorry I know this is an old thread that was resurrected but I hope you didn't get charged for that 9th injector delete.
Reply
Old Jul 31, 2025 | 02:01 PM
  #33  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,694
Likes: 979
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Custom Chips Inc review

He’s still scamming, get the word out. Avoid cash apps with this guy

Names he's gone by:
John Wayne
Johnny Bgood
John BG
Chris Bigelowe
John Bigelowe
oscar Sebastian

Custom Chip Inc
Third Gen Tuning
F Body ECM Tuning
F Body ECM Programming
Reply
Old Jul 31, 2025 | 02:04 PM
  #34  
Tuned Performance's Avatar
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,694
Likes: 979
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Custom Chips Inc review

Originally Posted by BackInBlack86
I actually caught him as Chris Bigelowe in a couple truck groups.
wow , stole a very old ad of mine to make his own

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lakeport
DIY PROM
4
Mar 29, 2012 11:26 AM
kik_start
DIY PROM
10
Jan 6, 2009 03:57 PM
TTA345
DIY PROM
4
Nov 27, 2006 11:15 PM
86blkbird
DFI and ECM
2
Aug 9, 2002 04:50 PM
boogada186
DIY PROM
4
Aug 11, 2001 01:18 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:05 PM.