Easy fix?
Supreme Member
iTrader: (28)
Joined: Jul 2006
Posts: 1,564
Likes: 2
From: ocklawaha FL.
Car: 81z-28,89gta,91z-28 03 1500
Engine: 355,L98vette tpi,327
Transmission: TH350/700R4/700r4/4l80E
Axle/Gears: 3;73/3;27/2;73/3;73
Senior Member
Joined: Jul 2007
Posts: 1,305
Likes: 1
From: Corner Brook, NL
Car: 1984 Z28 HT,2006 2500HD
Engine: 5.7L, 6.6Llbz dmax
Transmission: 700R4, 6 speed allison
Axle/Gears: worn out 3.73 posi
Re: Easy fix?
threads like this are showing up alot lately like this one a little while ago https://www.thirdgen.org/forums/body...-electric.html
Last edited by Brennan; Nov 24, 2008 at 08:33 PM.
Supreme Member
iTrader: (28)
Joined: Jul 2006
Posts: 1,564
Likes: 2
From: ocklawaha FL.
Car: 81z-28,89gta,91z-28 03 1500
Engine: 355,L98vette tpi,327
Transmission: TH350/700R4/700r4/4l80E
Axle/Gears: 3;73/3;27/2;73/3;73
Re: Easy fix?
HAHA! I have seen lots of this!
So turbo,care to clarify what the problem is?
So turbo,care to clarify what the problem is?
Last edited by TIMMYS89GTA; Nov 24, 2008 at 08:36 PM.
Re: Easy fix?
I can buy this car for $650, needs carb. I'm not much of a body man, but I'm one hell of a welder. That's the only rust spot on the car.


Last edited by turbo11g; Nov 25, 2008 at 04:37 PM.
Trending Topics
Senior Member
Joined: Jun 2008
Posts: 1,298
Likes: 2
From: Norfolk VA
Car: 85 Camaro IROC
Engine: 5.7 TPI
Transmission: 700-R4
Axle/Gears: open rear, 3.42 gears
Supreme Member
iTrader: (1)
Joined: Aug 1999
Posts: 2,842
Likes: 6
From: Rowlett, TX
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
Re: Easy fix?
That looks like some serious rust there, the short answer is no, it's not an easy fix. If you have the tools to cut out the rust and weld in a new panel, it's not impossible, but definitely will take some work.
Senior Member
Joined: Jul 2007
Posts: 1,305
Likes: 1
From: Corner Brook, NL
Car: 1984 Z28 HT,2006 2500HD
Engine: 5.7L, 6.6Llbz dmax
Transmission: 700R4, 6 speed allison
Axle/Gears: worn out 3.73 posi
Re: Easy fix?
now thats something that makes more sense lol. its definitely not what i would call "easy" but its fixable without a doubt, assuming its dont spread much further then that.and there are plenty of factory carburated irocs out there
Senior Member
Joined: Sep 2008
Posts: 588
Likes: 2
From: France
Car: 1984 Pontiac Firebird Trans Am
Engine: V8 5.0L HO (L69)
Transmission: B&W T5
Axle/Gears: 3.73 limited slip
Re: Easy fix?
I think it would be easier to change the whole fender, look at the hole behind the ground effect !
I'm sure you can find the easily in the US.
I'm sure you can find the easily in the US.
Re: Easy fix?
Looks like some of these so called experts don't know their irocs? Yes, carbed, 305 HO L69 engine.
For $650 would it be worth fixing? I've done small rustorations, but it looks like I'll have to cut quite a bit out. Can I just buy the panel from the body line down? \
For $650 would it be worth fixing? I've done small rustorations, but it looks like I'll have to cut quite a bit out. Can I just buy the panel from the body line down? \
Senior Member
Joined: Jul 2007
Posts: 1,305
Likes: 1
From: Corner Brook, NL
Car: 1984 Z28 HT,2006 2500HD
Engine: 5.7L, 6.6Llbz dmax
Transmission: 700R4, 6 speed allison
Axle/Gears: worn out 3.73 posi
Re: Easy fix?
if your takin about the crease at about the half way mark yes i bought one about 2 months ago cuz mine was rusted under the gfx in that spot IIRC it was 30-40 bucks
Senior Member
Joined: Jul 2007
Posts: 1,305
Likes: 1
From: Corner Brook, NL
Car: 1984 Z28 HT,2006 2500HD
Engine: 5.7L, 6.6Llbz dmax
Transmission: 700R4, 6 speed allison
Axle/Gears: worn out 3.73 posi
Re: Easy fix?
i bought it from napa but they ordered it from here http://www.crosscanadaparts.com/cgi-...ml?img_num=699 part # 699-60R
Member
Joined: Jul 2007
Posts: 465
Likes: 0
From: york, PA
Car: 88 iroc camaro
Engine: jasper 350, l98
Transmission: 700R4, corvette servo, shift kit.
Axle/Gears: stock
Re: Easy fix?
if the rest of the body is solid, the engine runs strong, and the car has not been "modified" too much, I say buy it.
Senior Member
iTrader: (1)
Joined: Oct 2008
Posts: 644
Likes: 1
From: Western Washington
Car: 86 T/A
Engine: 5.0 TPI
Transmission: 700R4
Re: Easy fix?
How come nobody around me has projects like this I could work on. Easy fix? ... yes! If you know what you're doing.
Senior Member
Joined: Jul 2007
Posts: 1,305
Likes: 1
From: Corner Brook, NL
Car: 1984 Z28 HT,2006 2500HD
Engine: 5.7L, 6.6Llbz dmax
Transmission: 700R4, 6 speed allison
Axle/Gears: worn out 3.73 posi
Member
Joined: Jul 2007
Posts: 465
Likes: 0
From: york, PA
Car: 88 iroc camaro
Engine: jasper 350, l98
Transmission: 700R4, corvette servo, shift kit.
Axle/Gears: stock
Re: Easy fix?
iroc was really just a package anyways. who cares if it is an iroc or not? if the car is in good condition 650= good deal.
Senior Member
Joined: Jul 2007
Posts: 1,305
Likes: 1
From: Corner Brook, NL
Car: 1984 Z28 HT,2006 2500HD
Engine: 5.7L, 6.6Llbz dmax
Transmission: 700R4, 6 speed allison
Axle/Gears: worn out 3.73 posi
Re: Easy fix?
odometer says 77000. I ran the vin on carfax due to the salvaged title. It reported an accident with no structural or frame damage, and the odometer reading was inaccurate. The engine code says it was a 305 TPI, which is gone. I did find 305 tpi motor and trans for $500 with the computer and all the wiring harness. 72000 miles out of a 92 bird. It needs door hinge bushings, inside door handle, radio bezel. Just needs some tlc and a little rust repair and some paint. I'm thinking black with hugger orange hockey sticks. Kind of like this one.
Last edited by turbo11g; Dec 20, 2008 at 02:30 PM.
Supreme Member
iTrader: (10)
Joined: Oct 2007
Posts: 1,881
Likes: 2
From: Fl.
Car: 83 Trans Am / 96 Jeep XJ
Engine: 355 / 4.0 I6
Transmission: TH350 / Auto
Axle/Gears: 3.23 10-bolt / 4wd
Re: Easy fix?
I never claimed to be an expert.
Senior Member
Joined: Jul 2007
Posts: 1,305
Likes: 1
From: Corner Brook, NL
Car: 1984 Z28 HT,2006 2500HD
Engine: 5.7L, 6.6Llbz dmax
Transmission: 700R4, 6 speed allison
Axle/Gears: worn out 3.73 posi
Thread
Thread Starter
Forum
Replies
Last Post




[/sarcasem]

