Body General body information and techniques for restoration, repairs, and modifications.

ceiling dome lamp console Q's

Thread Tools
 
Search this Thread
 
Old Mar 20, 2002 | 01:01 PM
  #1  
Randy82WS7's Avatar
Thread Starter
Supreme Member
 
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
ceiling dome lamp console Q's

ok in 84 on the ceiling console thing, theres a about a 2x6" rectangle plug or cover or something with thread stitches around the border of it, is it supposed to be able to be removed ? it look slike it can but maybe its not ? also just behind it towards rear of car on face of the console thing there small rectangle opening and some metal springy contact tang back inside there, what was in this originall ? i finall yfound out what those two small button switches up there were for once I got the fuse replaced, ones for the dome and other is for map, heh
then theres a trip odometer thing and a date thing up there too

what else is up there i dotn know about, i think something is missing regarding that open rectangle deal, anyone know ?

thanks
Reply
Old Mar 20, 2002 | 01:19 PM
  #2  
JamesC's Avatar
Moderator
25 Year Member
Liked
Loved
iTrader: (5)
 
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
I believe you're describing the sunglass pouch, a leatherette affair that could be removed (though you'd need to pull the console to do it). I assume it's missing. Directly behind it toward the dome light was a slot for the flashlight, which was a rectangular piece that simply pushed in. It was held in place by a small clip on the flashlight body itself.

JamesC
Reply
Old Mar 20, 2002 | 03:58 PM
  #3  
Randy82WS7's Avatar
Thread Starter
Supreme Member
 
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
so is that sunglass pouch cover a delete plate then ? flashlight thing from factory ? hmm interesting.. i rmeoved the console assembly today to remove the headliner earlier to clean it and get it ready to repair and recover, i oculdnt learn much new about the console by looking at it from the backside, heh


thanks!
Reply
Old Mar 20, 2002 | 05:36 PM
  #4  
JamesC's Avatar
Moderator
25 Year Member
Liked
Loved
iTrader: (5)
 
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Perhaps a pic will help. Seeing the front of the flashing, since it sits flush, is difficult, but it is there. Note the sunglass pouch.

JamesC
Attached Thumbnails ceiling dome lamp console Q's-overhed.jpg  
Reply
Old Mar 20, 2002 | 08:54 PM
  #5  
Randy82WS7's Avatar
Thread Starter
Supreme Member
 
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
interesting, mine doesnt have pouch, but instead it has a block off or delete plate, heh, made of same material as the rest of the console, flashlight stuff is missing too,
hmm

thanks !
Reply
Old Mar 21, 2002 | 06:27 AM
  #6  
JamesC's Avatar
Moderator
25 Year Member
Liked
Loved
iTrader: (5)
 
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
If I call correctly, the edges of the pouch are tucked around this 'plate' as you call it. I've seen many of these consoles and sold quite a few, but I've never seen one without the pouch. My "guess" is that someone's removed it.

JamesC
Reply
Old Mar 9, 2003 | 10:50 PM
  #7  
xChRiSx's Avatar
Junior Member
 
Joined: Jan 2003
Posts: 65
Likes: 0
From: horn lake, MS
I cant get that dome light console off of my roof, i only found 2 screws, around the dome light, and there is still somehting holding the console on. my guess is that the other screws are behind the pouch, but i didnt want to break it.
Reply
Old Mar 10, 2003 | 06:00 AM
  #8  
JamesC's Avatar
Moderator
25 Year Member
Liked
Loved
iTrader: (5)
 
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Do a search on my name and you'll find a thread having to do with the differences in the t-top and coupe versions of the overhead. There you'll see that both have four mounting slots forward. You either push the console toward the windshield or pull it toward the hatch, after removing the two screws you mention, for removal. Depends on the overhead you have.

JamesC
Reply
Old Mar 10, 2003 | 08:15 PM
  #9  
85SportCoupeto89RS's Avatar
Supreme Member
 
Joined: Jul 2001
Posts: 2,760
Likes: 0
From: Cove, Arkansas
Car: 85 Camaro SC
Engine: V6
Transmission: 700r4
I've seen a couple that didn't have the sunglasses pouch.
I use mine for holding my cellphone, I have it in the pouch, and the intenna goes into the flashlight hole since I dont have a camaro flash light. I like it and its not noticeable and easy to get to when it rings.
Reply
Old Mar 11, 2003 | 10:52 PM
  #10  
xChRiSx's Avatar
Junior Member
 
Joined: Jan 2003
Posts: 65
Likes: 0
From: horn lake, MS
I figured it out on my own yestersday, but thanks for the help. I thought nobody was responding to my threads but i forgot i used a diff. email address when i registered here
Reply
Old Mar 16, 2003 | 02:50 AM
  #11  
WalkerZ28's Avatar
Junior Member
 
Joined: Jan 2003
Posts: 40
Likes: 0
From: Hamburg, NY
Hey JamesC, would it be hard for me to install a overhead console in my car if it did not originally have one?
Reply
Old Mar 16, 2003 | 07:16 AM
  #12  
JamesC's Avatar
Moderator
25 Year Member
Liked
Loved
iTrader: (5)
 
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
WalkerZ,

Here's a thread I posted some time ago that will answer your questions. Also, IROCdave, has a tech article that should shed more light, should you need it. By the way, the Camaro White Book doesn't list the Overhead (DK6) for 1988.

If you have other questions, let me know.

JamesC
https://www.thirdgen.org/techbb2/sho...threadid=99782

Last edited by JamesC; Mar 16, 2003 at 12:41 PM.
Reply
Old Mar 16, 2003 | 12:02 PM
  #13  
89cmrodriver's Avatar
Supreme Member
 
Joined: Feb 2003
Posts: 1,473
Likes: 0
From: chesapeake va
Car: 08 Sierra, 08 Silverado, 91 z28
Engine: 5.3, 4.3, 5.7
Transmission: autos
the console is very east to install, its harder to wire it correctly than it is to install. the holes are already on the center support br for hte roof all u have to do is put 4 1/2" screws in the front slide it on and put 2 3/4" screws int eh holes in the dome light part, estiamted time: under 15 minutes
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Veaceonee
Firebirds for Sale
11
Sep 29, 2016 08:15 PM
Lbibb
Camaros for Sale
1
May 5, 2016 12:00 AM
1992Z28!
Camaros for Sale
3
Nov 19, 2015 07:33 AM
oil pan 4
Fabrication
2
Oct 6, 2015 11:56 AM
ndndndnd
Transmissions and Drivetrain
4
Sep 28, 2015 08:00 AM




All times are GMT -5. The time now is 07:16 AM.