ECU Files
Thread Starter
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
ECU Files
What I need is a complete as possible 749.ecu, if anyone has one. I snagged the one of the DIY-EFI site, and it's a short version, and I can't get into SYTY.NET.
Any help appreciated.
I snagged all the .ecus' I found at DIY, but if anyone knows of anymore I'd appreciate knowing where to look,
TIA
Any help appreciated.
I snagged all the .ecus' I found at DIY, but if anyone knows of anymore I'd appreciate knowing where to look,
TIA
Supreme Member
Joined: Jun 2000
Posts: 1,612
Likes: 0
From: the garage
Car: 84 SVO
Engine: Volvo headed 2.3T
Transmission: WCT5
Axle/Gears: 8.8" 3.73
Re: ECU Files
Originally posted by Grumpy
What I need is a complete as possible 749.ecu, if anyone has one. I snagged the one of the DIY-EFI site, and it's a short version, and I can't get into SYTY.NET.
Any help appreciated.
I snagged all the .ecus' I found at DIY, but if anyone knows of anymore I'd appreciate knowing where to look,
TIA
What I need is a complete as possible 749.ecu, if anyone has one. I snagged the one of the DIY-EFI site, and it's a short version, and I can't get into SYTY.NET.
Any help appreciated.
I snagged all the .ecus' I found at DIY, but if anyone knows of anymore I'd appreciate knowing where to look,
TIA
Re: ECU Files
Originally posted by Grumpy
...I can't get into SYTY.NET.
...I can't get into SYTY.NET.
You have more mail.
Are you going to rate the .ECU's you get on whose has the most missing } and spaces?
John
Thread Starter
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
Re: Re: ECU Files
Originally posted by JohnL
There are probably lots of reasons why, but they have a right not to talk to you if they don't want to, LOL.
You have more mail.
Are you going to rate the .ECU's you get on whose has the most missing } and spaces?
There are probably lots of reasons why, but they have a right not to talk to you if they don't want to, LOL.
You have more mail.
Are you going to rate the .ECU's you get on whose has the most missing } and spaces?

I'm waiting for a ransom demand, still no mail from you or Saturn5.
I get too many requists from folks asking for them. Plus I need one to play with.
TGO Supporter
iTrader: (1)
Joined: Nov 2002
Posts: 1,132
Likes: 1
From: Grand Island, NY
Car: 1990 Formula
Engine: 305 TPI
Transmission: WC T5
Any chance I could get a good ecu for the $58. I have not had luck finding one that will work with tunerpro. I even looked on tysy with no luck. Maybe I am looking in the wrong place.
Thanks
Tom
Thanks
Tom
Supreme Member
Joined: Jun 2000
Posts: 1,612
Likes: 0
From: the garage
Car: 84 SVO
Engine: Volvo headed 2.3T
Transmission: WCT5
Axle/Gears: 8.8" 3.73
Re: Re: Re: ECU Files
Originally posted by Grumpy
If you ever make it to Ohio, I'll tell ya over a beer.
I'm waiting for a ransom demand, still no mail from you or Saturn5.
I get too many requists from folks asking for them. Plus I need one to play with.
If you ever make it to Ohio, I'll tell ya over a beer.

I'm waiting for a ransom demand, still no mail from you or Saturn5.
I get too many requists from folks asking for them. Plus I need one to play with.
SyTy.net's server sucks.. I got in last night, comments about the server are many.
I'll try and send you my ecu's again.. Time 12:13pm.
BW
Trending Topics
Supreme Member
Joined: Jul 1999
Posts: 1,577
Likes: 0
From: Baton Rouge, LA, USA
Car: 87 T/A
Engine: 441 SBC 12.5:1 0.680" Lift
Transmission: T-56
Axle/Gears: 4.10 TruTrac Moser 9"
Thread Starter
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
Member
Joined: Nov 2000
Posts: 165
Likes: 0
From: Norfolk, Virginia
Car: 85 IROC
Engine: 406
Transmission: A4
Originally posted by ben73
Does anyone have a .ecu for #1226870 ('85 TPI)
I have searched hard for this without luck so far ;-(
TIA.
Does anyone have a .ecu for #1226870 ('85 TPI)
I have searched hard for this without luck so far ;-(
TIA.
Supreme Member
Joined: Jul 1999
Posts: 1,577
Likes: 0
From: Baton Rouge, LA, USA
Car: 87 T/A
Engine: 441 SBC 12.5:1 0.680" Lift
Transmission: T-56
Axle/Gears: 4.10 TruTrac Moser 9"
Bah...
Just passing on what is already public.
http://www.fortunecity.com/rivendell.../ECMDetail.htm
Just passing on what is already public.
http://www.fortunecity.com/rivendell.../ECMDetail.htm
Originally posted by Grumpy
Thread Starter
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
Originally posted by Craig Moates
Just passing on what is already public.
http://www.fortunecity.com/rivendell.../ECMDetail.htm
Just passing on what is already public.
http://www.fortunecity.com/rivendell.../ECMDetail.htm
Some places display stuff without giving credit to where they got the material, or the work that others did. But, it seems that once something is Public Domained, all that's forgotten, ie giving credit where credit is do. The really funny part is that on some sites they take to personal attacks, and then post the bad guys info., with no mention of the weeks/months worth of work they're posting, as if it's their own.
Supreme Member
Joined: Jul 1999
Posts: 1,577
Likes: 0
From: Baton Rouge, LA, USA
Car: 87 T/A
Engine: 441 SBC 12.5:1 0.680" Lift
Transmission: T-56
Axle/Gears: 4.10 TruTrac Moser 9"
Good point. Credit should be given where due. Know who deserves the kudos for the work that went into the material referenced above? Wish I did, they did a bang-up job from what I can see.
Thread Starter
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
Originally posted by Craig Moates
Good point. Credit should be given where due. Know who deserves the kudos for the work that went into the material referenced above? Wish I did, they did a bang-up job from what I can see.
Good point. Credit should be given where due. Know who deserves the kudos for the work that went into the material referenced above? Wish I did, they did a bang-up job from what I can see.
Can't say for sure, but the style is a give away.
Course you had to just about be around for the beginning to see who the real players were.
Junior Member
Joined: Feb 2002
Posts: 69
Likes: 0
From: Latham, NY
Car: 85 Corvette
Engine: 355 Superram
Transmission: 700R4 Transgo Shift Kit
Originally posted by MR. KIDD
You should have mail.
You should have mail.
Could you send me what you have on the 870. I'm trying to see how the TCC settings are compared to the 165 $6E.
Thread
Thread Starter
Forum
Replies
Last Post
KO1
Engine/Drivetrain/Suspension Parts for Sale
16
Oct 15, 2015 05:00 PM





