ALDL with Tunerpro and '8625
#1
TGO Supporter
Thread Starter
Join Date: Jan 2003
Location: Australia
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
ALDL with Tunerpro and '8625
As much as I have used TunerPro, I have never been successful in getting the ALDL part to work.
I downloaded a definition from moates.net, and I think that is the problem. I can connect, but all I get is the error count rocketing up. I don't want to create my own definition, but maybe I'll have to....
Has anyone ever datalogged this PCM with TunerPro?
Ben.
I downloaded a definition from moates.net, and I think that is the problem. I can connect, but all I get is the error count rocketing up. I don't want to create my own definition, but maybe I'll have to....
Has anyone ever datalogged this PCM with TunerPro?
Ben.
#2
While I haven't dataloged the '8625 with TunerProRT, I have been datalogging the '6395 and '7427 PCM's since TunerProRT came out. There is an error in the datastream definition (A217) in the aldlstuff.zip file. The mode 1 command (datastream request)was wrong. It needs to be F4, 56, 01 instead of F4, 57, 01. Looking at the "8625 .ads file on moates.net, it appears to have the same error in it. You might try that. There should be no problem datalogging that PCM as it is nearly identical to the '7427 and '6395. HTH
#3
TGO Supporter
Thread Starter
Join Date: Jan 2003
Location: Australia
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the tip! I tried that, and it then wouldn't even connect.. I'll have to dig deeper.. I don't know alot about aldl comms and the 'modes'..
#4
Junior Member
Join Date: Mar 2005
Location: Sweden
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Car: El camino 70 ss
Engine: corvette lt1 94
Transmission: 4L60E
It looks like its the same stream as the 6395-7427 ecm
Looks like all off this engines with 4L60E hase the 217 ads.
The ads 217 is OD217 engine v1_0.ads in moates.net.
The 219-220 ads its for the 4L80 trans and man
DATA STREAM A217
PCM-6 WITH 4L60E TRANSMISSION
ENGINE USAGE:
L03 5.0L 94 VIN = H C,K,G
L05 5.7L 94 VIN = K C,K,G
L35 4.3L 94 VIN = W S,T,M,L
LB4 4.3L 94 VIN = Z G,M,L,S,T,C,K
* L03 TBI 5.0L 95 VIN=H C,K,G
* L05 TBI 5.7L 95 VIN=K C,K,G
* L35 CPI 4.3L 95 VIN=W S,T,M,L
* LB4 TBI 4.3L 95 VIN=Z G,M,L,S,T,C,K
DATA STREAM A218
PCM-6 WITH 4L60E TRANSMISSION
The 4L60E transmission can be used with the following engines
TCM USAGE:
L03 TBI 5.0L 94 VIN = H C,K,G
L05 TBI 5.7L 94 VIN = K C,K,G
L35 CPI 4.3L 94 VIN = W S,T,M,L
LB4 TBI 4.3L 94 VIN = Z G,M,L,S,T,C,K
LN2 MFI 2.2L 94 VIN=4 S
* L03 TBI 5.0L 95 VIN=H C,K,G
* L05 TBI 5.7L 95 VIN=K C,K,G
* L35 CPI 4.3L 95 VIN=W S,T,M,L
* LB4 TBI 4.3L 95 VIN=Z G,M,L,S,T,C,K
* LN2 MFI 2.2L 94 VIN=4 S
DATA STREAM A219
PCM-6 WITH 4L80E TRANSMISSION
ENGINE USAGE:
LB4 TBI 4.3L 94 VIN = Z C,K,G,P
L05 TBI 5.7L 94 VIN = K C,K,G,P,W-MD
L19 TBI 7.4L 94 VIN = N C,K,G,P
* LB4 TBI 4.3L 1995 VIN = Z C,K,G,P
* L05 TBI 5.7L 1995 VIN = K C,K,G,P,W-MD
* L19 TBI 7.4L 1995 VIN = N C,K,G,P
* LB4 TBI 4.3L 1995 VIN = Z C,K (HD) MANUAL TRANS.
* L19 TBI 7.4L 1995 VIN = N C,K (HD) MANUAL TRANS. pcm-6
DATA STREAM A220
PCM-6 WITH 4L80E TRANSMISSION
The 4L80E transmission can be used with the following engines
TCM USAGE:
LB4 TBI 4.3L 94 VIN = Z C,K,G,P
L05 TBI 5.7L 94 VIN = K C,K,G,P
L19 TBI 7.4L 94 VIN = N C,K,G,P
L05 TBI 5.7L 94 VIN = A MEDIUM DUTY TRUCK
* LB4 TBI 4.3L 95 VIN = Z C,K,G,P
* L05 TBI 5.7L 95 VIN = K C,K,G,P
* L05 TBI 5.7L 95 VIN = A MEDIUM DUTY TRUCK
* L19 TBI 7.4L 95 VIN = N C,K,G,P
Looks like all off this engines with 4L60E hase the 217 ads.
The ads 217 is OD217 engine v1_0.ads in moates.net.
The 219-220 ads its for the 4L80 trans and man
DATA STREAM A217
PCM-6 WITH 4L60E TRANSMISSION
ENGINE USAGE:
L03 5.0L 94 VIN = H C,K,G
L05 5.7L 94 VIN = K C,K,G
L35 4.3L 94 VIN = W S,T,M,L
LB4 4.3L 94 VIN = Z G,M,L,S,T,C,K
* L03 TBI 5.0L 95 VIN=H C,K,G
* L05 TBI 5.7L 95 VIN=K C,K,G
* L35 CPI 4.3L 95 VIN=W S,T,M,L
* LB4 TBI 4.3L 95 VIN=Z G,M,L,S,T,C,K
DATA STREAM A218
PCM-6 WITH 4L60E TRANSMISSION
The 4L60E transmission can be used with the following engines
TCM USAGE:
L03 TBI 5.0L 94 VIN = H C,K,G
L05 TBI 5.7L 94 VIN = K C,K,G
L35 CPI 4.3L 94 VIN = W S,T,M,L
LB4 TBI 4.3L 94 VIN = Z G,M,L,S,T,C,K
LN2 MFI 2.2L 94 VIN=4 S
* L03 TBI 5.0L 95 VIN=H C,K,G
* L05 TBI 5.7L 95 VIN=K C,K,G
* L35 CPI 4.3L 95 VIN=W S,T,M,L
* LB4 TBI 4.3L 95 VIN=Z G,M,L,S,T,C,K
* LN2 MFI 2.2L 94 VIN=4 S
DATA STREAM A219
PCM-6 WITH 4L80E TRANSMISSION
ENGINE USAGE:
LB4 TBI 4.3L 94 VIN = Z C,K,G,P
L05 TBI 5.7L 94 VIN = K C,K,G,P,W-MD
L19 TBI 7.4L 94 VIN = N C,K,G,P
* LB4 TBI 4.3L 1995 VIN = Z C,K,G,P
* L05 TBI 5.7L 1995 VIN = K C,K,G,P,W-MD
* L19 TBI 7.4L 1995 VIN = N C,K,G,P
* LB4 TBI 4.3L 1995 VIN = Z C,K (HD) MANUAL TRANS.
* L19 TBI 7.4L 1995 VIN = N C,K (HD) MANUAL TRANS. pcm-6
DATA STREAM A220
PCM-6 WITH 4L80E TRANSMISSION
The 4L80E transmission can be used with the following engines
TCM USAGE:
LB4 TBI 4.3L 94 VIN = Z C,K,G,P
L05 TBI 5.7L 94 VIN = K C,K,G,P
L19 TBI 7.4L 94 VIN = N C,K,G,P
L05 TBI 5.7L 94 VIN = A MEDIUM DUTY TRUCK
* LB4 TBI 4.3L 95 VIN = Z C,K,G,P
* L05 TBI 5.7L 95 VIN = K C,K,G,P
* L05 TBI 5.7L 95 VIN = A MEDIUM DUTY TRUCK
* L19 TBI 7.4L 95 VIN = N C,K,G,P
Last edited by honken; 12-03-2005 at 05:45 PM.
#5
Originally posted by honken
It looks like its the same stream as the 6395-7427 ecm
Looks like all off this engines with 4L60E hase the 217 ads.
The ads 217 is OD217 engine v1_0.ads in moates.net.
The 219-220 ads its for the 4L80 trans and man.....
It looks like its the same stream as the 6395-7427 ecm
Looks like all off this engines with 4L60E hase the 217 ads.
The ads 217 is OD217 engine v1_0.ads in moates.net.
The 219-220 ads its for the 4L80 trans and man.....
DATA STREAM A201
ENGINE USAGE: PCM-6 4L60E
L03 5.0L VIN = H 93 C,K,G
L05 5.7L VIN = K 93 C,K,G
L35 4.3L VIN = W 93 S,T,M,L
LB4 4.3L VIN = Z 93 G,M,L,S,T,C,K
DATA STREAM A204
TCM USAGE: PCM-6 4L60E
4.3L TBI LB4 (VIN=Z) 93
4.3L TBI L35 (VIN=W) 93
5.0L TBI L03 (VIN=H) 93
5.7L TBI L05 (VIN=K) 93
#6
Supreme Member
iTrader: (2)
Join Date: Jan 2002
Location: Moorestown, NJ
Posts: 9,962
Likes: 0
Received 3 Likes
on
3 Posts
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
Re: ALDL with Tunerpro and '8625
Originally posted by ben73
As much as I have used TunerPro, I have never been successful in getting the ALDL part to work.
I downloaded a definition from moates.net, and I think that is the problem. I can connect, but all I get is the error count rocketing up. I don't want to create my own definition, but maybe I'll have to....
Has anyone ever datalogged this PCM with TunerPro?
Ben.
As much as I have used TunerPro, I have never been successful in getting the ALDL part to work.
I downloaded a definition from moates.net, and I think that is the problem. I can connect, but all I get is the error count rocketing up. I don't want to create my own definition, but maybe I'll have to....
Has anyone ever datalogged this PCM with TunerPro?
Ben.
#7
TGO Supporter
Thread Starter
Join Date: Jan 2003
Location: Australia
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Re: Re: ALDL with Tunerpro and '8625
Originally posted by dimented24x7
I have an untouched stock 8625 and just for yucks I used the $0D A217 engine def file with RT and it appeared to datalog fine on the bench. Connects immediatly. Other then a few boogers in the def file itself it appears to work ok.
I have an untouched stock 8625 and just for yucks I used the $0D A217 engine def file with RT and it appeared to datalog fine on the bench. Connects immediatly. Other then a few boogers in the def file itself it appears to work ok.
I'll start with that and edit anything thats different with the $E6
ben_p@bigpond.net.au
Thanks!
Trending Topics
#8
Supreme Member
iTrader: (2)
Join Date: Jan 2002
Location: Moorestown, NJ
Posts: 9,962
Likes: 0
Received 3 Likes
on
3 Posts
Car: 88 Camaro SC
Engine: SFI'd 350
Transmission: TKO 500
Axle/Gears: 9-bolt w/ 3.23's
Its on moates.net in the file section. First one there under the datastream definitions. It should at least show something when it datalogs. That will at least help you determine if your having a hardware issue. From what I could tell, most of the major things where datalogging correctly.
#9
TGO Supporter
Thread Starter
Join Date: Jan 2003
Location: Australia
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by dimented24x7
Its on moates.net in the file section. First one there under the datastream definitions. It should at least show something when it datalogs. That will at least help you determine if your having a hardware issue. From what I could tell, most of the major things where datalogging correctly.
Its on moates.net in the file section. First one there under the datastream definitions. It should at least show something when it datalogs. That will at least help you determine if your having a hardware issue. From what I could tell, most of the major things where datalogging correctly.
#10
Re: Re: Re: ALDL with Tunerpro and '8625
Originally posted by ben73
Great! Would you mind sending me the definition file you used??
I'll start with that and edit anything thats different with the $E6
ben_p@bigpond.net.au
Thanks!
Great! Would you mind sending me the definition file you used??
I'll start with that and edit anything thats different with the $E6
ben_p@bigpond.net.au
Thanks!
#11
TGO Supporter
Thread Starter
Join Date: Jan 2003
Location: Australia
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Well it works with the $0D definition, and as dimented said, most of the stuff is in the right place. I'll comfirm each one and fix the few that aren't correct.
Thanks again!
Thanks again!
Thread
Thread Starter
Forum
Replies
Last Post