Im playing around with a "new" but stock bin AXXB and all the Enrich Power and Enrich Accel tables are zeroed out. In general is that basically saying "im not getting and AE and PE mode"? I like the tune as a starting point and im willing to try and learn each table alittle better. Just wondering if i need to start working on these tables or leave them be for now.

Thanks

 

I'm thinking "your new but stock bin" isnt a virgin.

I've never seen a SD 90-92 bin with any PE or AE tables zeroed out.

Might want to tread real carefully here or see if u can try mathcing it against another one you can find or if someone can send u one.

later
Jeremy

 

 

Make sure you are using the right def code $8d, or what said above..
I have done that before, some tables show up with value's and some do not.

 

I did Tunerpro .bin compare to the S_AUJP_V.3 so i could copy the CCE setting to delete them in my "*****" chip I didnt see alot of difference other than "Item Not Defined" differences.

I got the bin from 87TPI7749. Its the closest thing i could find to the AWFY, which is in my memcal right now. I cant find anything else. Looking for AWFY Thread Ive went over it pretty throughly and it seems good but i didnt use a fine tooth comb.

I guess i better check it out some more. I have driven on this .bin and scored a nice looking datalogg. For what it counts.

 

AWFY - isn't the the 305 TPI dual cat manual tranny BIN? If so, it was superceded by GM with AXYC for the '91 cars. And I can give you a new copy of that one. I did the same hunt a couple of years ago, and that's what I found out, hence my using AXYC as the base for my 383 manual BIN..... (but I'm helping field test the AUJP_MT version 4 right now.....)

 

Im hoping it isnt since im running a 700R. Its what i read straight out of my memcal. Whos to say it originally came with the car though.

Thanks anyways man.

 

Sorry, I was "thinking" wrong.

AWFZ was the 91 305TPI dual cat manual tranny bin file.