ok got my cable the other day went out on a test drive and all i could get was the raw data? i bought a usb-obd1 cable and set my com port up corectly know its not hardware prob (pc tech by profession) I set it up with a 746 esm because i drive a 92 camaro rs w/305 tbi and thats what car came with. haven pulled dash to check but im pretty confident it was never changed is there a setting anyone can tell that i did wrong. I havent checked this out yet but there is a jumber on the usb connector and spec sheet says that it is in the norm position top l to top r but there is also a setting to short pin a to b do i need to do that? HELP lol new to dataloging and proming lol rough start already

 

ok well if anyone knows please let me know cause i tried both a shorted to b and 10k resistor and none worked. Would it be easier to use tuner pro rt?

 

I'm confused ... are you getting absolutely nothing and wondering why? Or are you getting data and are not sure what to do with it? Where did you get your cable from?

 

i am just getting the RAW data no sensor readings no o2 readings blms etc. cant remember offhand where i got the cable but it appears to be working because i am getting dome numbers like promide and what not

 

Are you getting the green flashing light at the top of the winaldl window?

 

no a red 1

 

I no longer use winaldl but I do remember that when I had a red light it showed incomplete data and found it came from a loose connection or loose cable. The light should be green............

 

well i got fed up with it lol paid 30 and got tunerpro rt and the aldl function works great now i just have to learn what this all means

 

oh figured out why minaldl wouldn't work....baud rate was incorrect
woops