'87 350 TPI setup for sale make offer
Thread Starter
Junior Member
Joined: Aug 2005
Posts: 54
Likes: 0
From: Sycamore, IL
Car: 1983 Camaro Z28
Engine: 383ci
Transmission: 700-4R
Axle/Gears: 3.42 10 bolt
'87 350 TPI setup for sale make offer
Like the title says, I have a TPI complete setup from an '87 Firebird that I bought used that I have decided to go another route and don't need. I have never had this setup installed. It comes with everything though including sensors, thermo housing, injectors, wiring, distributor, bolts, and ECM. I did put some mother's polish on 4 of the runners and they look pretty good. It does have a touch of outdoor-ness to it, meaning that it doesn't look brand new. 
I am going to be putting it into my parts cleaner to get some of the oil off of the belly pan so that it looks nicer for pics. Everyone on here is picture hungry, so I will try to get some soon. Thanks for checking this out, have a great day.
I am going to be putting it into my parts cleaner to get some of the oil off of the belly pan so that it looks nicer for pics. Everyone on here is picture hungry, so I will try to get some soon. Thanks for checking this out, have a great day. 
Junior Member
Joined: Jun 2006
Posts: 2
Likes: 0
From: Stevens Point Wisconsin
Car: Black '91 Camaro RS T-Top conv.
Engine: 3.1 V6:-(
Transmission: 5 speed manual, I despise automatic
Axle/Gears: ??? I'm not that serious yet
my '91
You happen to know if you're 87 350 is compatible with my '91 RS body? I don't think that it is? Anyone else have a comment?
Trending Topics
Thread Starter
Junior Member
Joined: Aug 2005
Posts: 54
Likes: 0
From: Sycamore, IL
Car: 1983 Camaro Z28
Engine: 383ci
Transmission: 700-4R
Axle/Gears: 3.42 10 bolt
yes, you can actually run the '87 unit with the '91 body because the difference is in the computers and the MAF, so since this is an entire setup by itself, it will work just as if it were bolted to any other body.
Member
Joined: May 2006
Posts: 115
Likes: 0
From: St. Louis, MO
Car: '92 RS ~ '92 Ranger
Engine: 305 TPI ~ 2.3 OHC
Transmission: 700R4 ~ Mazda 5-Speed
Axle/Gears: 10-bolt 3.23's ~ 7.5
92IrocRS
$500 shipped to 63021? Definitely interested, 92 RS 305 TPI, badly wanting more cubic inches!!!
Thread Starter
Junior Member
Joined: Aug 2005
Posts: 54
Likes: 0
From: Sycamore, IL
Car: 1983 Camaro Z28
Engine: 383ci
Transmission: 700-4R
Axle/Gears: 3.42 10 bolt
just so everyone is clear, I never said there was an engine included in the setup. It is just that, the TPI SETUP, not the whole engine.
Thread Starter
Junior Member
Joined: Aug 2005
Posts: 54
Likes: 0
From: Sycamore, IL
Car: 1983 Camaro Z28
Engine: 383ci
Transmission: 700-4R
Axle/Gears: 3.42 10 bolt
don't know the mileage as I got it from another member, but it doesn't seem to be in too bad of shape
Member
Joined: Apr 2006
Posts: 118
Likes: 0
From: Los Angeles
Car: 1998 Z28
Engine: 350 lt1 sued up
Transmission: 460le
sold
300 shipped sold to me thanks shipped to 90059
----------
Oh and to any one who wants to buy a ecm I have speed density from a trans am 91 and a Maf from a 88 iroc Both are for sale tested working fine
----------
Oh and to any one who wants to buy a ecm I have speed density from a trans am 91 and a Maf from a 88 iroc Both are for sale tested working fine
Last edited by Camaroman P; Jun 18, 2006 at 08:18 PM. Reason: Automerged Doublepost
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Originally Posted by Camaroman P
300 shipped sold to me thanks shipped to 90059
----------
Oh and to any one who wants to buy a ecm I have speed density from a trans am 91 and a Maf from a 88 iroc Both are for sale tested working fine
----------
Oh and to any one who wants to buy a ecm I have speed density from a trans am 91 and a Maf from a 88 iroc Both are for sale tested working fine
-- Joe
Thread
Thread Starter
Forum
Replies
Last Post