[WI] Dart Pro 1 Stage 5 Ported Heads
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2004
Posts: 94
Likes: 0
From: WI
Car: '90 Camaro RS
Engine: Aluminum Brodix-block SB 427
Transmission: Turbo 400
Axle/Gears: Moser 33 Spline 4:10
Dart Pro 1 Stage 5 Ported Heads
For sale is a pair of Dart Pro 1 64 cc combustion chamber aluminum heads. They where ported by CFM (Creative Flow Management) and flow 300 CFM at 600 lift. They started off as a 200 cc intake runner, but I was told that after the porting they should be around a 212 cc. They come fully assembled with Comp Cams#249-950-16 springs, Comp Cams #249-740-16 retainers, and push rod guide plates. These heads would be killer on a 350-383 cubic inch motor, they just don't flow enough for my 427. They also feature a 2.055" intake valve, as opposed to most 200-210 cc heads that usually come with a 2.05" valve.
These heads usually go for about $800 and I have $1,000 in the porting, so I'm looking for $1,000 plus shipping.
SOLD I also have a set of 7/16" 1.6:1 Harland Sharp roller rockers. They are in really great shape, but one rocker was clearanced for a center bolt valve cover bolt. You can see from the top view of the picture below that it did not take away enough material to compromise it's strength. They come with stud girdles, and locking rocker adjusting nuts.
They go for $240, I'm looking for $150 plus shipping for the rockers, stud girdles, and adjusting nuts. SOLD
These heads usually go for about $800 and I have $1,000 in the porting, so I'm looking for $1,000 plus shipping.
SOLD I also have a set of 7/16" 1.6:1 Harland Sharp roller rockers. They are in really great shape, but one rocker was clearanced for a center bolt valve cover bolt. You can see from the top view of the picture below that it did not take away enough material to compromise it's strength. They come with stud girdles, and locking rocker adjusting nuts.
They go for $240, I'm looking for $150 plus shipping for the rockers, stud girdles, and adjusting nuts. SOLD
Last edited by Rickj350RS; Feb 23, 2013 at 07:01 PM.
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2004
Posts: 94
Likes: 0
From: WI
Car: '90 Camaro RS
Engine: Aluminum Brodix-block SB 427
Transmission: Turbo 400
Axle/Gears: Moser 33 Spline 4:10
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2004
Posts: 94
Likes: 0
From: WI
Car: '90 Camaro RS
Engine: Aluminum Brodix-block SB 427
Transmission: Turbo 400
Axle/Gears: Moser 33 Spline 4:10
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2004
Posts: 94
Likes: 0
From: WI
Car: '90 Camaro RS
Engine: Aluminum Brodix-block SB 427
Transmission: Turbo 400
Axle/Gears: Moser 33 Spline 4:10
Re: Dart Pro 1 Stage 5 Ported Heads
Rockers are SOLD, but heads are still up for sale!!
Member
iTrader: (2)
Joined: Jan 2006
Posts: 103
Likes: 1
From: Ettrick WI
Car: 92 Z,92 RS,95 SS,00 WS6, 04 XUV
Engine: 383z,350RS, LT1, LS1 ,vortec 4.2
Transmission: 700R4, 700R4,4L60E,4L60E, Auto,
Re: Dart Pro 1 Stage 5 Ported Heads
where in Wi are you , and what your bottom $ on the heads
Trending Topics
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2004
Posts: 94
Likes: 0
From: WI
Car: '90 Camaro RS
Engine: Aluminum Brodix-block SB 427
Transmission: Turbo 400
Axle/Gears: Moser 33 Spline 4:10
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2004
Posts: 94
Likes: 0
From: WI
Car: '90 Camaro RS
Engine: Aluminum Brodix-block SB 427
Transmission: Turbo 400
Axle/Gears: Moser 33 Spline 4:10
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2004
Posts: 94
Likes: 0
From: WI
Car: '90 Camaro RS
Engine: Aluminum Brodix-block SB 427
Transmission: Turbo 400
Axle/Gears: Moser 33 Spline 4:10
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2004
Posts: 94
Likes: 0
From: WI
Car: '90 Camaro RS
Engine: Aluminum Brodix-block SB 427
Transmission: Turbo 400
Axle/Gears: Moser 33 Spline 4:10
Supreme Member
Joined: Feb 2006
Posts: 1,366
Likes: 1
From: St.Louis, IL
Car: 1988 Camaro
Engine: 377
Transmission: TH350; Circle D 4200 converter
Axle/Gears: Ford 9"
Re: Dart Pro 1 Stage 5 Ported Heads
man, that's a mean port job.. If I weren't paying for my 9" now those heads would be GONE and shipped to my house. Someone grab them!
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2004
Posts: 94
Likes: 0
From: WI
Car: '90 Camaro RS
Engine: Aluminum Brodix-block SB 427
Transmission: Turbo 400
Axle/Gears: Moser 33 Spline 4:10
Re: Dart Pro 1 Stage 5 Ported Heads
Both heads and rockers were sold
Thread
Thread Starter
Forum
Replies
Last Post
MoJoe
Engine/Drivetrain/Suspension Parts for Sale
11
Sep 24, 2015 09:12 PM
Dialed_In
Firebirds for Sale
2
Aug 20, 2015 01:45 PM
