ok, so I drive an 85 Iroc, but most companies have headers listed for the 86 and up irocs, but forget about the 85. i want to do my exhaust from the headers back and was wondering if i got the 86 headers, and the exhaust for that if it would bolt up, or is it for clearence purposes?

 

i have the flowtech you can get from advanced, but they dont have emissions on them. so if you can get rid of the emissions on your car get those,and they come with a y pipe you have too get welded.
----------
and yes they should work,or call and talk too the company and they should help you out,or any parts store can help you

 

Moving to exhaust board.

 

Hey 3vi1p3nguin, I think we are from the same place in Michigan.

Find headers with a y pipe, it's the easiest way to go and still have ground clearance.

 

wow, up in the UP? thats the middle of nowhere, im actually south of ann arbor, so im not that far out.

but either way, im looking at edelbrock headers, and they come with a y pipe, its just the year listing that i wasnt sure about, like if they had a different size collector or something like that

 

The following will fit your requirements: Hooker 2055's (Jeg's 520-2055). Catco high-flow converter (Summit CTO-9118). Hooker catback (Summit HOK-16823HKR). Direct fit 3-inch mandrel-bent system from the collectors back (no fabing, no welding). Recommended.

JamesC

 

James C, does Hooker make the 2055's without the A.I.R. system tubes. Also, does the y-pipe that comes with the headers bolt directly to the stock large oval opening square 4-bolt flange? Thanks, Badman

 

Http://www.jet-hot.com also offers various model / year, different brands and some in house configurations at reasonable prices.

 

As far as I know, the 2055's are emission's compliant. I had the air tubes cut and welded closed. The Y has no provisions to bolt to the four-bolt cat (the Y is round, the cat oval, IIRC), which is why I chose the system I mention above.

JamesC

 

Instead of cutting the emmisions tubes on the headers and welding them, I ordered mine without. If you go that route, make sure you ask for headers with an 02 bung otherwise you'll have to add it.

 

I'll be darned. I didn't realize they existed. Cool.

JamesC

 

The only headers I know of that will bolt directly to the 4 bolt cat is the edelbrock TES # EDL-68733 at summit. I would rather go with the Hooker 2055's and convert the whole car to a slip fit 86+ cat and cat back.

 

Wade, where did you order from?

JamesC