8.96 @ 167
Thread Starter
Member
Joined: Jul 2001
Posts: 475
Likes: 0
From: NewCastle,DE USA !
8.96 @ 167
New best, Finally in the 8's!
Car has a tendancy to break rear gears, so soft roll out's are in order for now. The car does a nice power wheelie about 30-40' out when mashed to the floor. This motor combo is setup for Vortech Extreme Street and Limited street where low 8's are in order to be competitive. I also am running at 3500# with me in it. Not bad for a small bloch Chevy!
60' 1.825
330' 4.149
1/8 6.022
mph 132.26
1000 7.618
1/4 8.968
mph 167.07
https://www.thirdgen.org/forums/powe...sting-pic.html
Car has a tendancy to break rear gears, so soft roll out's are in order for now. The car does a nice power wheelie about 30-40' out when mashed to the floor. This motor combo is setup for Vortech Extreme Street and Limited street where low 8's are in order to be competitive. I also am running at 3500# with me in it. Not bad for a small bloch Chevy!
60' 1.825
330' 4.149
1/8 6.022
mph 132.26
1000 7.618
1/4 8.968
mph 167.07
https://www.thirdgen.org/forums/powe...sting-pic.html
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
gettin' there! get some kinda real rearend under it so you can stand on the transbrake...then hold on!!!
Thread Starter
Member
Joined: Jul 2001
Posts: 475
Likes: 0
From: NewCastle,DE USA !
Trending Topics
Supreme Member
Joined: Jul 2004
Posts: 2,387
Likes: 2
Originally Posted by §teve
awesome...full interior too. Car looks sick.
Senior Member
iTrader: (1)
Joined: Jun 2004
Posts: 572
Likes: 0
From: North Ga.
Car: 1987 Camaro
Engine: 406
Transmission: Powerglide
Axle/Gears: Moser 31 spline / 4.86
you ever run with ORSCA? Outlawracing.com They have class called Limited Street. But it's 1/8th mile and you gotta be 4.90's 5.0's to be competitive.
Here's one of the Limited Street cars http://www.limitedstreet.com/06videos/pc318/reese1.wmv
Here's one of the Limited Street cars http://www.limitedstreet.com/06videos/pc318/reese1.wmv
Last edited by 1bad406; Apr 15, 2006 at 11:40 PM.
Senior Member
iTrader: (1)
Joined: Jun 2004
Posts: 572
Likes: 0
From: North Ga.
Car: 1987 Camaro
Engine: 406
Transmission: Powerglide
Axle/Gears: Moser 31 spline / 4.86
132 mph is strokin to only be going 6.0's. put a 9" in that thing and let it rip. here's some highlights of the last outlaw race. It has Outlaw 10.5, Limited Street, Radial EZ street, and some 6.0 heads up racing. Also Pro Mod, but you'll be able to tell those cars, they were all blower motors. All the Outlaw classes are ran on 10.5" wide tires.
:: RaceWorks.com ::
:: RaceWorks.com ::
Last edited by 1bad406; Apr 16, 2006 at 04:07 PM.
Member
iTrader: (1)
Joined: Jan 2002
Posts: 283
Likes: 0
From: jacksonville fl
Car: 91 firebird
Engine: sb2.2 headed sbnos
Transmission: tsi glide
Axle/Gears: 4.30
ive seen this car before and really like it. where did you get the hood from? are those 315s or 295 mt on it? Btw the beadlocks are siiiiick!
Supreme Member
Joined: Dec 2001
Posts: 1,960
Likes: 1
From: Newark, DE
Car: 2006 Corvette
Engine: LS2
Transmission: T56
Axle/Gears: 3.42s
awesome man!
i gotta show this to my younger brother... he thinks all 3rdgens are junk and that modding anything OTHER than an LS1 is a waste of time (btw- he drives a stock 01' T/A). how cool is this that you have a 8sec 3rdgen on a extremely soft 60ft AND youre probably only a couple minutes away from me!!!
ever run at Cecil?
i gotta show this to my younger brother... he thinks all 3rdgens are junk and that modding anything OTHER than an LS1 is a waste of time (btw- he drives a stock 01' T/A). how cool is this that you have a 8sec 3rdgen on a extremely soft 60ft AND youre probably only a couple minutes away from me!!!
ever run at Cecil?
Thread
Thread Starter
Forum
Replies
Last Post