Does anyone have an actual CAM CARD for GM's LT4 HOT cam??
Thread Starter
Senior Member
Joined: Sep 2003
Posts: 784
Likes: 1
From: New Mexico
Car: 1991 Camaro Z28 5.7 G92
Engine: L98 Tuned Port Injection
Transmission: TH700R4
Axle/Gears: 3.23 Posi G80
Does anyone have an actual CAM CARD for GM's LT4 HOT cam??
I know the specs @ .050 lift 218 228, .525 lift with 1.6, .492 with 1.5 rockers. I would like a cam card to help me better degree in the cam for my friends buildup. I need IVO, IVC, EVO, EVC events. Thanks!
Supreme Member
Joined: Oct 2001
Posts: 1,392
Likes: 4
From: orlando, fl usa
Car: 1986 pontiac TA
Engine: 360 HSR
Transmission: 700r4 3300 yank converter
Axle/Gears: 3.27 9 bolt
not a cam card. but according to DD2000 the LT4 hot cam numbers are as follows:
IVO = 0.3
IVC = 38.8
EVO = 49.1
EVC = -0.2
hope this helps.
IVO = 0.3
IVC = 38.8
EVO = 49.1
EVC = -0.2
hope this helps.
Thread Starter
Senior Member
Joined: Sep 2003
Posts: 784
Likes: 1
From: New Mexico
Car: 1991 Camaro Z28 5.7 G92
Engine: L98 Tuned Port Injection
Transmission: TH700R4
Axle/Gears: 3.23 Posi G80
What intake centerline did you use when you entered those specs? I know the lobe sep is 112 but what's the darn centerline #?
Supreme Member
Joined: Apr 2001
Posts: 4,969
Likes: 0
From: USA
Car: yy wife, crazy.
Engine: 350, Vortecs, 650DP
Transmission: TH-350
Axle/Gears: 8.5", 3.42
It's probably ground with 108* ICA since most small block Chevys operate best with 4*, but that doesn't matter. You can make it whatever you want.
The specs mrr23 gave put it at 109.3* ATDC if that helps.
The specs mrr23 gave put it at 109.3* ATDC if that helps.
Supreme Member
Joined: Oct 2001
Posts: 1,392
Likes: 4
From: orlando, fl usa
Car: 1986 pontiac TA
Engine: 360 HSR
Transmission: 700r4 3300 yank converter
Axle/Gears: 3.27 9 bolt
i didn't put those in. these specs came with the program
lobe center 111.9
oh yeah and theses specs are at .050 duration.
lobe center 111.9
oh yeah and theses specs are at .050 duration.
Trending Topics
Senior Member
Joined: Oct 2001
Posts: 571
Likes: 0
From: Starkville, MS
Car: 1991 Camaro Z28
Engine: 350
Transmission: 700R4
Supreme Member
iTrader: (3)
Joined: Nov 2001
Posts: 2,428
Likes: 2
From: Fairview Heights Illinois
Car: 1986 Irocz
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.25:1
Re: Does anyone have an actual CAM CARD for GM's LT4 HOT cam??
I'm bringing this back up.
I've been searching the web for over 30 minutes and it seems nobody has a cam card for the LT4 hot cam.
If anyone has the car info or has degreed the cam themselves please post the specs from the card!
Thank you.
I've been searching the web for over 30 minutes and it seems nobody has a cam card for the LT4 hot cam.
If anyone has the car info or has degreed the cam themselves please post the specs from the card!
Thank you.
Supreme Member
iTrader: (3)
Joined: Nov 2001
Posts: 2,428
Likes: 2
From: Fairview Heights Illinois
Car: 1986 Irocz
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.25:1
Re: Does anyone have an actual CAM CARD for GM's LT4 HOT cam??
These specs just turned up.
Can anyone confirm these?
Intake open: 30.5 BTDC Intake close: 68.5 ABDC
Exhaust open: 78.5 BBDC Exhaust close: 28.5 ATDC
Can anyone confirm these?
Intake open: 30.5 BTDC Intake close: 68.5 ABDC
Exhaust open: 78.5 BBDC Exhaust close: 28.5 ATDC
Supreme Member
iTrader: (3)
Joined: Nov 2001
Posts: 2,428
Likes: 2
From: Fairview Heights Illinois
Car: 1986 Irocz
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.25:1
Re: Does anyone have an actual CAM CARD for GM's LT4 HOT cam??
Looking for the .050" specs.
anyone?
anyone?
Member
iTrader: (2)
Joined: Jun 2004
Posts: 184
Likes: 1
From: PA
Car: 94 9c1 Caprice
Engine: LT1 (3-fity)
Transmission: 4L60E reBUILT
Axle/Gears: 3:08 POSI (out)
Re: Does anyone have an actual CAM CARD for GM's LT4 HOT cam??
Thats the same as POST #6, and #2 which is @.050
rounded off...
IVO 1
IVC 39
EVO 50
EVC 0
rounded off...
IVO 1
IVC 39
EVO 50
EVC 0
Last edited by zipfast; Feb 4, 2009 at 08:00 AM.
Supreme Member
iTrader: (3)
Joined: Nov 2001
Posts: 2,428
Likes: 2
From: Fairview Heights Illinois
Car: 1986 Irocz
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.25:1
Re: Does anyone have an actual CAM CARD for GM's LT4 HOT cam??
Supreme Member
iTrader: (3)
Joined: Nov 2001
Posts: 2,428
Likes: 2
From: Fairview Heights Illinois
Car: 1986 Irocz
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.25:1
Re: Does anyone have an actual CAM CARD for GM's LT4 HOT cam??
ttt
I'd like to eventually get the info here so it will show up if someone searches for this.
I'd like to eventually get the info here so it will show up if someone searches for this.
Junior Member
Joined: Nov 2008
Posts: 75
Likes: 0
From: Lake Mary
Car: '87 IROC, '92 & 99 Corvette Vert.
Engine: L98, LT1, LS1
Transmission: L98 = 700R4
Axle/Gears: L98 = 3.23 G92
Re: Does anyone have an actual CAM CARD for GM's LT4 HOT cam??
The Lunati 50143 is very similar to the LT4 Hot Cam. I would venture to say it is identical for all intents and purposes.
219 / 227 (@ .05" lift)
.471" / .480" (1.5 rocker ratio)
IVO - 1.5*
IVC - 37.5*
EVO - 49.5*
EVC - -2.5*
Centerline - 108*
Lobe Separation - 112*
CG
219 / 227 (@ .05" lift)
.471" / .480" (1.5 rocker ratio)
IVO - 1.5*
IVC - 37.5*
EVO - 49.5*
EVC - -2.5*
Centerline - 108*
Lobe Separation - 112*
CG
Thread
Thread Starter
Forum
Replies
Last Post
junkcltr
Tech / General Engine
6
Aug 2, 2019 11:12 PM
1988iroc350tpi
Tech / General Engine
8
Aug 14, 2015 07:52 PM
