The lever that you push to wash the windshield with was broken when I got my car and now I want to fix it. How do I go about doing this. Taking it apart etc.

------------------
1988 Sport Coupe 305 TBI
K&N
Flowmaster exhaust


Daily driver:
1988 K1500 5.7 4x4 shortbed flowmaster cat-back gutted cat.

 

take off the steering wheel, you will need a puller, keep tearing it down until you're at the lever, remove and replace, reassemble in the reverse order..

------------------
Webmaster: www.IROC-Z.org

 

whats a puller?

 

the puller looks like a Y, you can rent it at AutoZone..

you put 3 bolts into the steering wheel and then use a large bolt in the center to pull the wheel off.. you tighten the center bolt and it'll slowly pull the wheel off and it'll fall into your hands..



------------------
Webmaster: www.IROC-Z.org

 

wow. seems like alot of work just to get that stupid thing off lol.

 

heh..

it shouldn't take you more than 15 minutes to get it off..

i changed the camber switch in my old truck in like 25 minutes, lol..

------------------
Webmaster: www.IROC-Z.org

 

I would try to take off the steeering wheel without even using the puller. I've taken 2 off recently and they just came right off, no force needed.

 

Whoa whoa whoa are you just talking about the plastic part of the lever that it's cracked in half? Just pull out the lever and the part that engages the switch (that they're talking about inside the column) is a little tab that fits into the circular switch. You can drill a small screw into this tab or something, or you might try reparing the plastic with a heat gun or something.

 

yeah thats the one I ROCK sorry I wasn't more detail in my question

 

Just as long as you know that you DON'T need to tear into the column...

 

LoL big check on that one