350 tpi rebuild
Thread Starter
Joined: Dec 2008
Posts: 2,540
Likes: 0
From: Norwalk, CA
Car: 91Z28
Engine: 5.7 ls1
Transmission: 4l60e
Axle/Gears: 3.42
350 tpi rebuild
Hi this is my first time rebuilding an engine and it is all stock i just want to know if this is all i would need i am just making a basic rebuild http://cgi.ebay.com/ebaymotors/1986-...Q5fAccessories
and this rings http://cgi.ebay.com/ebaymotors/1986-...Q5fAccessories
and this rings http://cgi.ebay.com/ebaymotors/1986-...Q5fAccessories
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: 350 tpi rebuild
You need bearings too, but you won't know what size until you've seen what shape the crank is in.
Thread Starter
Joined: Dec 2008
Posts: 2,540
Likes: 0
From: Norwalk, CA
Car: 91Z28
Engine: 5.7 ls1
Transmission: 4l60e
Axle/Gears: 3.42
Re: 350 tpi rebuild
He already told me it doesn't need any machining but do i need to change the bearings
Last edited by SiCkRs; Jan 8, 2009 at 07:02 PM.
Trending Topics
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: 350 tpi rebuild
There's only 3 sets, the main bearings, the cam bearings and the rod bearings. The cam bearings need an installation tool to put in, you can ask the shop to do it for you, though.
Thread Starter
Joined: Dec 2008
Posts: 2,540
Likes: 0
From: Norwalk, CA
Car: 91Z28
Engine: 5.7 ls1
Transmission: 4l60e
Axle/Gears: 3.42
Re: 350 tpi rebuild
Like this one http://cgi.ebay.com/ebaymotors/1986-...Q5fAccessories
would be good they told me it has a performanace cam but i just bought the engine a month ago for $500 with all the accessories
would be good they told me it has a performanace cam but i just bought the engine a month ago for $500 with all the accessories
Thread Starter
Joined: Dec 2008
Posts: 2,540
Likes: 0
From: Norwalk, CA
Car: 91Z28
Engine: 5.7 ls1
Transmission: 4l60e
Axle/Gears: 3.42
Re: 350 tpi rebuild
My bad i meant to put this ones http://cgi.ebay.com/ebaymotors/Main-...Q5fAccessories
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: 350 tpi rebuild
Assuming everything is stock size and the crank isn't turned at all:
Mains:
http://store.summitracing.com/partde...M&autoview=sku
Rods:
http://store.summitracing.com/partde...P&autoview=sku
Cam:
http://store.summitracing.com/partde...M&autoview=sku
Mains:
http://store.summitracing.com/partde...M&autoview=sku
Rods:
http://store.summitracing.com/partde...P&autoview=sku
Cam:
http://store.summitracing.com/partde...M&autoview=sku
Thread Starter
Joined: Dec 2008
Posts: 2,540
Likes: 0
From: Norwalk, CA
Car: 91Z28
Engine: 5.7 ls1
Transmission: 4l60e
Axle/Gears: 3.42
Re: 350 tpi rebuild
So with those and with the kit i showed you that would be good stock rebuild right
Thread Starter
Joined: Dec 2008
Posts: 2,540
Likes: 0
From: Norwalk, CA
Car: 91Z28
Engine: 5.7 ls1
Transmission: 4l60e
Axle/Gears: 3.42
Re: 350 tpi rebuild
Thank you i will tell you when i finish rebuilding the engine can i add you my friends
Thread
Thread Starter
Forum
Replies
Last Post
