willexoIX

Searched and all I found were dead links and he said she said....

What mini starters will Definitively work with our 2.8/3.1/3.4? 148 tooth flywheel. 2.8 starter has STAGGERED mounting bolt holes.

DO NOT RESPOND IF YOU DO NOT KNOW THE FACTS.

NO OPINIONS.

RubberDucky

iTrader: (4)

Buy some to test them. If they don't work give them to me.

Fast355

iTrader: (2)

2000+ GM FWD cars used a permenant magnet, gear reduction mini starter on the 3100 and 3400 engines. Might be able to adapt one onto your application.

For my stuff I grab them off the 4.3 S10s and Astro vans in the junkyard for my older 350s and they bolt right on as long as you are running the correct flywheel or flexplate.

willexoIX

350's bolt holes are directly across from one another IIRC, the 2.8/3.1/3.4 have staggered bolt holes so no.

I'm not looking to adapt anything. If you don't have pertinent information on a direct bolt in, don't add an opinion, add facts please.

No offense.

Fast355

iTrader: (2)

Good luck!! I wasn't saying to use the 4.3 starter rather used it as an example of interchangeability. I said look at the newer FWD V6s as I have messed with them and they look like they might work.

FWIW small blocks can have the starter bolt holes straight across or offset.

willexoIX

I had figured that was the case, but all the ones I came across had them in line.

Just looking to find one quick that may have been used before, cause I can't use the ball flange with the stock starter on the turbo headers.

If not I have to make the headers where the one side is very difficult to remove. Before they were just difficult with the 3 bolt collectors. LOL

willexoIX

This looks to be close. Thoughts?

http://www.ebay.com/itm/New-Starter-Chevy-3-High-Performance-High-Torque-Mini-168-Tooth-9000899-6449-/271168669682?hash=item3f22e987f2&vxp=mtr

jakemussman

iTrader: (3)

Just get one for a 350 that says it will fit a 168 tooth ring gear. Many performance mini starters will work for either 168 or 153.

willexoIX

Will this fit the 148 tooth 2.8 flywheel? That is neither 168 nor 153.... Do you have a 2.8/3.1/3.4 with one of these starters on it to make sure it works? I want facts here.

RubberDucky

iTrader: (4)

You could try it. I highly doubt many if anyone has tried a mini-starter on a 60*6 in a F-Body. I'll take a look at my 327 and see where the bolts line up. If they are staggered like that ebay link I'll buy it and let you test it.

willexoIX

I appreciate that, I just dont have the funds to toss around to test a bunch of them.

project89

iTrader: (1)

willie i recall somone using either a 4th gen f-body starter which was the smaller type or a late model 3100/3400 starter , ill see if i cant dig up the info for you

i do recall it being a bolt in deal

Six_Shooter

iTrader: (2)

Fact of the matter is that there are no off the shelf "mini-starters" for the RWD V6.

Anything posted will be speculation, maybe even fairly educated speculation.

If you don't want help, even if it's not 100% known to be exactly what you want, don't create a thread that will be filled with possibilities. Do you own research then, using search engines and existing posts.

Creating threads with these directives only serves to waste peoples time, and frustrate others.