Eightyninef

completely redone 113 heads. new valves, new springs, retainers, etc, etc. 3 angle cut. bead blasted. still in the plastic bags from the machine shop. They were NOT ported and polished. D ports. angle plugs.

$700

I need money to clean up my property from the hurricane. My fence got destroyed, I have 2 big trees down. I have to hire a tree company.

No REASONABLE offer will be refused.

shipping from 11757, please use UPS.com to look up freight, around 50 lbs.

Eightyninef

TTT

Eightyninef

offers welcome

peterc005

What year are the heads from?

Any pics?

I have a 1988 IROC with an L98 and am looking for aluminium heads, either from a Corvette or after market. Shipping to Wilmington CA.

Eightyninef

Eightyninef

L98 Corvette heads. Must sell !!!

Eightyninef

$50 price drop.
$650 for totally redone corvette L98 heads.

must sell !!!

Eightyninef

I must sell these heads. I will listen to all reasonable offers...

Steve Mack

iTrader: (5)

What size valves are on the heads?What springs were used.Were the heads surfaced?From the pictures it doesn't look like it.Thanks,Steve

Eightyninef

I do not have the specs on the valves and springs. and they were not surfaced, as the machine shop says there was no need. they are within spec, as per a very reputable machine shop on Long Island.

If you have money, I am listening to all REASONABLE offers.

88gta3508

I would not use them.. they are pitted pretty good from detonation for that price they should be re-surfaced ready to bolt on

Eightyninef

#1) they are ready to be bolted on.
#2) they are NOT pitted from detonation.
#3) they were re-done by the best machine shop on Long Island.
#4) there is no reason to be an a-hole and ruin my F/S thread. If your not interested, stay the F out of my thread. plain and simple.

83 Crossfire TA

iTrader: (2)

What's the max lift they're set up for? What are the spring rates/what springs do they have?

Drac0nic

Totally OT and I don't know how much it will help you but I figured I would throw it out there. I had a tree down and I got a quote of $700 to haul it off. What I did instead was put up a "free cut your own firewood" ad on Craigslist and put "cut at your own risk" in it as a disclaimer. That being said I had 2 or 3 people within an hour that wanted my tree for fire wood. It saved me a ton of bank doing it that way. If you can burn just go buy a saw and make a fire pile if it's not green, that will save you a ton of $ as well.

the blur

Bolted these heads on my 305. WOW, SOTP is noticable. The car is now a torque monster !! Low end is amazing. and I'm sure the 50lbs helped.

83 Crossfire TA

iTrader: (2)

Did they ever get sold?

the blur

Bolted these heads on my 305. WOW, SOTP is noticable. The car is now a torque monster !! Low end is amazing. and I'm sure the -50lbs helped.

What a deal!

Arts89Iroc

Are the heads still available?

the blur

Bolted these heads on my 305. WOW, SOTP is noticable. The car is now a torque monster !! Low end is amazing. and I'm sure the -50lbs helped.

What a deal!

I noticed my MPG went up too. Maybe from the weight savings...

camaro1122

iTrader: (1)

Are the heads still forsale?

wyochimneysweep

iTrader: (1)

If these ones are gone I got a set thats been planed and valves been done. got 981-16 springs installed. just pulled off my engine today. got about 5000 miles on them and will be at the machine again monday to be rechecked.

84'B.A.T.A.

iTrader: (2)

how much?

the blur

Bolted these heads on my 305. WOW, SOTP is noticable. The car is now a torque monster !! Low end is amazing. and I'm sure the -50lbs helped.

What a deal!

twest2k2

I would be interested in these heads at the right price...

instaldave

iTrader: (1)

Did you even read the thread before you posted? The heads have long since been sold.

twest2k2

Wasn't sure. The world "sold" never came up. Sorry to ruin your day lol