Third Generation F-Body Message Boards

 
Page 1 of 4
1
2
3
4
Search: Posts Made By: yanfoo
Showing results 1 to 50 of 172
Search took 0.20 seconds.
Forum: Carburetors
09-19-2004, 03:24 PM
Replies: 3
Views: 1,081
Posted By yanfoo

it's back togheter the float level was too high...

it's back togheter the float level was too high so i ajusted that to 7/16" per recomendation on eddies site.
Not much improve on the idle, i did remove the "acces" plate of the primary metering rods...
Forum: Carburetors
09-19-2004, 12:54 PM
Replies: 3
Views: 1,081
Posted By yanfoo

no reply hummm. I'm about to try something,...

no reply hummm.
I'm about to try something, i've read somewhere that having a big cam (i'm not sure how big mine is) = low vaccuum at idle = it's not succking the primary metering rods down good at...
Forum: Carburetors
09-18-2004, 12:10 PM
Replies: 3
Views: 1,081
Posted By yanfoo

750cfm edelbrock leaning help.

Hi guys i've just got a 350 s-15 that idle real bad.
have edelbrock 1407, 750cfm.
882 stock recently rebuilt heads, block recently rebuilt too.
eldelbrock rpm intake, and an unknown cam that feel...
Forum: Carburetors
05-01-2004, 12:50 PM
Replies: 2
Views: 1,702
Posted By yanfoo

Rich carb, Holley 4160...

Hi i've installed a 4160 holley on my mostly stock 305 and it's running too rich (black smoke!, small bog when secondary kicks in-> not awfull at all)... I also have problem with the power brakes,...
Forum: Carburetors
04-28-2004, 06:41 PM
Replies: 10
Views: 981
Posted By yanfoo

5000$ Canadian. Comes with the original parts...

5000$ Canadian. Comes with the original parts that i have removed... manifold , muffler, carb...
It need repairs here and there... the spoiler would need to be change, the bird on the hood is all...
Forum: Carburetors
04-26-2004, 07:10 PM
Replies: 10
Views: 981
Posted By yanfoo

My car is a 87 Trans-Am, Manual 5spd, 305 <-- erk...

My car is a 87 Trans-Am, Manual 5spd, 305 <-- erk need more cubic inch in there... It has Hooker longtube with true dual 2" and 2 spintech pro-street mufflers, no ground clearance issue the system is...
Forum: Carburetors
04-26-2004, 07:05 PM
Replies: 3
Views: 489
Posted By yanfoo

yes that's what i'm going to try when i got some...

yes that's what i'm going to try when i got some time...
i can bring it back no problem even after it has been open in a local store...
Forum: Engine Swap
04-24-2004, 09:34 PM
Replies: 26
Views: 1,148
Posted By yanfoo

http://www.dragtimes.com/browse3.php?carmake=Dodge...

http://www.dragtimes.com/browse3.php?carmake=Dodge&carmodel=Viper

Some may not be stock in this listing.
Forum: Engine Swap
04-24-2004, 09:30 PM
Replies: 26
Views: 1,148
Posted By yanfoo

Nice # I'd say low 12's... very low, huggin the...

Nice #
I'd say low 12's... very low, huggin the 11's.
Do you have some meat to hook?


a Viper? No idea whats there ET.
Forum: Carburetors
04-24-2004, 09:07 PM
Replies: 10
Views: 981
Posted By yanfoo

hey Pat, goto Canadian Tire take an air cleaner...

hey Pat,
goto Canadian Tire take an air cleaner of the shelf try it, if it still too high bring it back , get the money back and check with the clerk if they can look into there book for a dropbase...
Forum: Carburetors
04-24-2004, 11:12 AM
Replies: 3
Views: 489
Posted By yanfoo

clearance, adaptor+holley

Hi guys, it's been a while (car out of storage now).
I've installed a holley on an adapter plate (1") because i'm using stock intake...

Now the hood dont close well with the stock air cleaner,...
Forum: Carburetors
11-19-2003, 08:25 AM
Replies: 3
Views: 755
Posted By yanfoo

yes, i did plugs so fast... I'm about to do the...

yes, i did plugs so fast... I'm about to do the wires + cap & rotor... Other than that the coil will just have to hold there some more, i can still switch it with the T/A coil since that puppy is in...
Forum: Carburetors
11-18-2003, 10:10 PM
Replies: 3
Views: 755
Posted By yanfoo

what makes 2bbl Bog?

Hi i have a problem with my 2bbl Rochester in the Malibu(bone stock, v8 267)...
When i start it up (1 or 2 gas pedal pushes, depend how long it has not being started), if more than 2 days, it will...
Forum: Tech / General Engine
11-08-2003, 12:39 AM
Replies: 4
Views: 487
Posted By yanfoo

me too

Yeah me too i've notice that, i still not sure if it's normal in my case, because i have Dual with no crossflow and only my driver side blow a bit of condensation (no cats).
I think i have an exaust...
Forum: Exhaust
11-05-2003, 04:37 PM
Replies: 13
Views: 1,307
Posted By yanfoo

spintech does more quiet muff

MrDude_1, Spintech has in the street muffler section, the "Sportsman Street" muff and also the "Sportsman Street XL" wich is said to be even more quiet... i got "Pro-Street" ones and love them... not...
Forum: Suspension and Chassis
10-23-2003, 08:41 PM
Replies: 21
Views: 638
Posted By yanfoo

French Msg. Salut boussole tu vie au Qc :) ...

French Msg.
Salut boussole tu vie au Qc :)
bon moi quand j'ai acheter mes Mufflers Spintech j'ai payer 75$ d'extra a UPS quand ils sont arriver a ma porte, c'etais pas inclu dans le prix de...
Forum: Carburetors
10-11-2003, 10:34 PM
Replies: 5
Views: 607
Posted By yanfoo

spray can

get a can of Carb cleaner or brake cleaner or intake cleaner...
then spray the vacuum lines you still have, if any change of the engine, like a stumble is found... you found it.
Also spray the...
Forum: Tech / General Engine
10-05-2003, 04:44 PM
Replies: 0
Views: 320
Posted By yanfoo

Anyone knows one

Hi guys, since i have my T/A i found out this nice forum, but now i just got an other car :) (i got 4 now, too much if you ask me, i'll be selling 2, no not the T/A :P)

The new car is a Malibu...
Forum: Exhaust
09-30-2003, 08:08 PM
Replies: 62
Views: 4,765
Posted By yanfoo

if he change the engine mount, he may need to...

if he change the engine mount, he may need to "mod" the body otherwise the headers will HIT in several places.

My car is not lowered and i think these headers are preaty low... still my exaust...
Forum: Exhaust
09-30-2003, 07:44 PM
Replies: 8
Views: 594
Posted By yanfoo

3rdGen CAR = 2210

jeffsbluez is right, if you have a 3rdGen CAR then you need 2210.
It's not the engine that make the diff part # it's the BODY!
the way the headers are bent because of the engine surrouding parts.
...
Forum: Exhaust
09-28-2003, 02:07 PM
Replies: 8
Views: 594
Posted By yanfoo

I think the part # you want is hooker 2231 ...

I think the part # you want is hooker 2231
Hooker Super Competition 1 3/4in. Headers for 1993-97 LT1 F-body-(Long Tube).
for about 410$ uncoated and 620$ coated...

This part # is for a 4thGen...
Forum: Exhaust
09-26-2003, 07:29 PM
Replies: 26
Views: 14,377
Posted By yanfoo

Hummm, i dont heard anything like an exaust leak...

Hummm, i dont heard anything like an exaust leak at, idle and such.

How to check my headers gasker (there the hooker one that came it the hedders), also i got the hedman flange adapter because i...
Forum: Exhaust
09-25-2003, 07:58 PM
Replies: 26
Views: 14,377
Posted By yanfoo

my spintech pro-street does the snap crackle pop...

my spintech pro-street does the snap crackle pop on Deceleration, I dont mind actually :)

I like them alots... it actualy sound like Open hedders but with a volume control.
Forum: Organized Drag Racing and Autocross
09-25-2003, 06:52 PM
Replies: 12
Views: 654
Posted By yanfoo

my spintech are the the Pro-Street muffler, wich...

my spintech are the the Pro-Street muffler, wich is STREET mufflers :) I like them alot... no problem with cops, there not very loud, but still the stock engine, change cam and head i bet it will be...
Forum: Organized Drag Racing and Autocross
09-24-2003, 06:59 PM
Replies: 12
Views: 654
Posted By yanfoo

i have the stock Single way air cleaner, the...

i have the stock Single way air cleaner, the stock non-cc Qjet (canadian car), stock ignition, stock open 3.08 :P , skinny 215x75x15 , also the cheapest rebuild clutch i could find and i got it...
Forum: Transmissions and Drivetrain
09-21-2003, 09:50 PM
Replies: 19
Views: 1,756
Posted By yanfoo

my car does this also at 140kmh and higher, if i...

my car does this also at 140kmh and higher, if i give gas it vibrate a bit less, let go the gas and woaahhh crazy vibes, not pleasent at all. rims balancement is not perfect, but look good enough,...
Forum: Organized Drag Racing and Autocross
09-21-2003, 06:32 PM
Replies: 12
Views: 654
Posted By yanfoo

Thanx guy! I'll try to fund for mods this winter....

Thanx guy! I'll try to fund for mods this winter.


I went for a ride this morning and, well, the clutch now makes noise, from it being "Glazed"... I need a new one, sure i can do everything like...
Forum: Organized Drag Racing and Autocross
09-21-2003, 09:52 AM
Replies: 12
Views: 654
Posted By yanfoo

1st Time to Track, EVER!

Hi, I went to the track for the first time in my life! YES! i never went as a spectator!!!! I want more, lol... too bad the summer is gone, they will close in my area preaty soon...

Anyway, my car...
Forum: Tech / General Engine
09-18-2003, 09:06 PM
Replies: 15
Views: 987
Posted By yanfoo

when my car was stock... 120mph at 3000rpm <--...

when my car was stock...
120mph at 3000rpm <-- if the stock rpm reads good :rolleyes:
t5 - 3.08.

slowed down because i got wild vibration about 80mph... still dont know what it is, but i might...
Forum: Exhaust
09-13-2003, 04:02 PM
Replies: 7
Views: 1,104
Posted By yanfoo

Carb + CAM... More air movement makes more...

Carb + CAM...

More air movement makes more sounds, so i'ts hard to make a mouse sound exactly like a Rat, but still mouse does sound good to me...

When you see a Old MuscleCar , if you can, ask...
Forum: Tech / General Engine
09-08-2003, 08:16 PM
Replies: 5
Views: 540
Posted By yanfoo

my friend have a 73 Nova with a 307 and a...

my friend have a 73 Nova with a 307 and a PowerGlide, seem fine, so-so performance, but since the thing is almost stock, it's alright. He can spin the tires if wanted and seem to have a okay top...
Forum: Engine Swap
09-06-2003, 09:37 PM
Replies: 3
Views: 822
Posted By yanfoo

the Chevette is a RWD!!! the swap have been...

the Chevette is a RWD!!!
the swap have been done by alot of ppl, some event put v8 350 in that little bug that weight half a firebird.

I just found out the engine and tranny out of the junked...
Forum: Engine Swap
09-05-2003, 07:19 PM
Replies: 3
Views: 822
Posted By yanfoo

come on! whats the v6 automatic transmission of...

come on! whats the v6 automatic transmission of thoses 2.8 and 3.1 camaro?
Forum: Engine Swap
09-03-2003, 07:35 PM
Replies: 3
Views: 822
Posted By yanfoo

4cyl to v6 swap

hi there, i'd like some info for a swap i would like to do...
put a 2.8 or 3.1 v6 in a 86 Chevette.

I think i can find an 2.8 fuel inject with the trans of a firebird... wires still in, at my...
Forum: Carburetors
08-20-2003, 06:28 PM
Replies: 8
Views: 956
Posted By yanfoo

any idea on the price of an electric choke kit?

any idea on the price of an electric choke kit?
Forum: Exhaust
08-20-2003, 06:09 PM
Replies: 5
Views: 885
Posted By yanfoo

maybe, but it depends whats the setup... i only...

maybe, but it depends whats the setup...
i only have turndown on my mufflers, so not much to grab, so close its hot hot!
Forum: Carburetors
08-20-2003, 06:03 PM
Replies: 8
Views: 956
Posted By yanfoo

whats more often? once a year? sound good to me,...

whats more often? once a year? sound good to me, lol...

i'm looking for a NEW carb too... was looking at Holley because of there prices, do they make a Electric Choke + Manual Sec around 600cfm...
Forum: Exhaust
08-20-2003, 05:55 PM
Replies: 5
Views: 885
Posted By yanfoo

rubber peice would always be better, and reduce...

rubber peice would always be better, and reduce noise... you could cut an old tire...

my exaust do get real hot! can't touch bare hand after a ride.
Forum: Carburetors
08-18-2003, 05:56 PM
Replies: 9
Views: 554
Posted By yanfoo

thats a hard Q, im leaning toward Holley because...

thats a hard Q, im leaning toward Holley because of the price factoid! but are they good??? im looking at the street avenger, anyone know if they do a electric choke + manual sec , around 600cfm?
...
Forum: Exhaust
08-18-2003, 05:11 PM
Replies: 2
Views: 406
Posted By yanfoo

that stock clip! OMG

i dont know what muffler i had on my TA but it was dead quite, that sound clip of the stock LT1 muff is awesome! wow...

carnut3, if your car sound like the "*stock*" clip, well, its nice to me....
Forum: Exhaust
08-18-2003, 05:01 PM
Replies: 5
Views: 1,047
Posted By yanfoo

pic

not on car but, its on the car :)
im not sure but i think its upside down, did'nt notice...

Humm, i was looking at my hanger than yours, i have a manual, and you Auto, but i do think it goes...
Forum: Exhaust
08-17-2003, 02:48 PM
Replies: 5
Views: 1,047
Posted By yanfoo

this one bolt to the "Torque Arm bolts", the...

this one bolt to the "Torque Arm bolts", the small end on the tranny. (well i have a t5, and it look like that.)
should be bolted on the passenger side, on the transmission you sould see 2 bolt ...
Forum: Exhaust
08-12-2003, 06:41 PM
Replies: 16
Views: 1,941
Posted By yanfoo

yes when i said the "street" i was speaking about...

yes when i said the "street" i was speaking about the sportsman street mufflers, but they are bigger and i would have need to modif for more clearance... so yes Street Serie Mufflers.

my car is...
Forum: Exhaust
08-12-2003, 05:19 PM
Replies: 16
Views: 1,941
Posted By yanfoo

pro-street

it's the pro-street, 6331... wish i could have use the street one,
they will be on each side of the trunk "bump" where you see the frame...
same thing as RickTPI... really. but i'll have dual 2"...
Forum: Exhaust
08-11-2003, 08:18 PM
Replies: 16
Views: 1,941
Posted By yanfoo

i got them today :P

only from soundclip i deceided to buy 2 spintech...
got to weld tips and paint them black.
Forum: Exhaust
08-10-2003, 03:55 PM
Replies: 18
Views: 776
Posted By yanfoo

here my pic

here my pic, 87 carbed with vbelt setup.
not the greatest pic, but to cloudy today.
Forum: Carburetors
08-05-2003, 06:59 PM
Replies: 7
Views: 519
Posted By yanfoo

PERF RPM AIR-GAP

in a magasine i saw a 550HP engine (383) with performer rpm air gap, then they but a small carb blower, it made 750HP. was a carbed engine, and blower is the one you but your carb in a small air...
Forum: Auto Detailing and Appearance
08-05-2003, 06:43 PM
Replies: 6
Views: 570
Posted By yanfoo

i wish i lived in the us!

yes, it's still cheaper to order from USA then buy localy here in canada, that's when the parts are american made... like a eldelbrock Q-jet, worth 600$ US wich = 840$ CAN, but in the store they want...
Forum: Auto Detailing and Appearance
08-03-2003, 07:42 PM
Replies: 6
Views: 570
Posted By yanfoo

AR torq-T II Q?

Hi, i was looking at American Racing wheels, the Torq-Trush2
Why is there a serie 405 ,505 and a 605, what is change between the 3? aloy???

What about the American Eagle one(eagle aloy) serie...
Forum: Exhaust
08-03-2003, 02:23 PM
Replies: 17
Views: 1,111
Posted By yanfoo

Loud and Low :) Hope you tryed it open...

Loud and Low :)


Hope you tryed it open headers :D

I've just bring my car back with open hooker 2210, woahhhh my head hurt so much! the problem is the noise when keeping a steady RPM on the...
Showing results 1 to 50 of 172
 
Page 1 of 4
1
2
3
4


 
Forum Jump


All times are GMT -5. The time now is 05:19 PM.