Key stuck in ignition
#1
Key stuck in ignition
My key as the title says is getting stuck in the ignition, sometime it will come out ok, other times it wont come out at all, I turn to get it (towards me) and it does not turn all the way (to the notches line up) whats the deal???
#2
Supreme Member
iTrader: (3)
Join Date: May 2005
Location: Southern IL
Posts: 1,942
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 GTA "Cocaine"
Engine: 350 tpi
Transmission: 700r4
Axle/Gears: 3.27
spray some good lub on the key and put it in slowly. keep spraying the key while putting it in a little further each time.
If this does not work for you take the steering wheel apart off and take the collumn apart untill you get to the ignition cylinder out and then spray it down.
If that does not work take the cylinder to the lock smith with your key and tell him or her to "Get Her Done!"
If this does not work for you take the steering wheel apart off and take the collumn apart untill you get to the ignition cylinder out and then spray it down.
If that does not work take the cylinder to the lock smith with your key and tell him or her to "Get Her Done!"
#7
Originally Posted by JamesC
Before you get too carried away. Try a shot of Lock-Ease (or perhaps even WD-40) with the key in the lock.
JamesC
JamesC
Trending Topics
#8
Supreme Member
Join Date: May 2003
Location: Toledo, OH
Posts: 1,995
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Firebird
Engine: forged 357
Transmission: 700r4, 2200-2400 stall, vette servo
Axle/Gears: stock pegleg 2.73 drum (temp)
Originally Posted by Slow2.8
will try the wd-40... put the car in park? haven't thought of that one yet
Thread
Thread Starter
Forum
Replies
Last Post
Denricci22
Transmissions and Drivetrain
5
09-18-2015 09:02 AM