umi performance suspension
#1
Member
Thread Starter
Join Date: Oct 2002
Location: memphis
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Car: 67 camaro ( project )
Engine: 6.7 408 n a snail
Transmission: 4l80 - stalled
Axle/Gears: 3.25 - narrowd tci kit 9 inch
umi performance suspension
anyone used these guys parts? such as the lower control arms , panhard bar , and relocation brackets. i called and talk to a guy there yesturday and they seemed very friendly and answered all the questions i had very knowlegebly. seemed like a great company! how are there products. please advise.
#2
Senior Member
Join Date: Dec 1999
Location: San Antonio, TX
Posts: 770
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86Z/92 RS Camaro
Engine: 357 vortec finished. need tuning
Transmission: Still works
Axle/Gears: need 3.73
I have all 3 parts that you have mentioned. I have yet to install the parts since I am still currently working on my engine. The parts are great and most of all they have great customer service. Did you talk with Ryan at UMI?
Disclaimer: "I am not nor am I affiliated with the UMI company."
Disclaimer: "I am not nor am I affiliated with the UMI company."
Last edited by 86z/92rs; 03-15-2005 at 03:28 PM.
#4
Member
Thread Starter
Join Date: Oct 2002
Location: memphis
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Car: 67 camaro ( project )
Engine: 6.7 408 n a snail
Transmission: 4l80 - stalled
Axle/Gears: 3.25 - narrowd tci kit 9 inch
yea i talked to ryan. he was a great help, he sent me a couple of emails and then was a great help on the phone. i actually ordered the relocation brackets, LCA's and adjustable panhard bar. they should be here friday and on the car saturday.
#5
Junior Member
Join Date: May 2004
Location: PA
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro IROC
Originally posted by KagA152
i support site sponsors
i support site sponsors
This was there Response: "I have been in contact with them in interest of sponsoring there site, but the response I had gotten was that they were full and not accepting anymore sponsors"
How can a company support a site that doest allow anymore supporting? I also think it is good to support the sponsors, but because a company is not a sponsor we should not deal with them? That seems a bit harsh...
#6
Member
Thread Starter
Join Date: Oct 2002
Location: memphis
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Car: 67 camaro ( project )
Engine: 6.7 408 n a snail
Transmission: 4l80 - stalled
Axle/Gears: 3.25 - narrowd tci kit 9 inch
i agree i mentioned TGO to ryan on the phone while i was ordering the parts. i didnt want to comment about only buying sponsers products but there are alot of companies out there making the same parts.
#7
Member
Thread Starter
Join Date: Oct 2002
Location: memphis
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Car: 67 camaro ( project )
Engine: 6.7 408 n a snail
Transmission: 4l80 - stalled
Axle/Gears: 3.25 - narrowd tci kit 9 inch
got all my parts today...talk about fast shipping only took 3 days fropm Pa to Tn. these look like some great parts. the color is a beautiful red and bushings looked fantastioc. i couldnt find a single blimish! im going to install them this weekend ill post to let everyone know how they work. if the work 1/2 as good as they look im happy
Trending Topics
#12
Supreme Member
iTrader: (5)
Join Date: Apr 2002
Location: Roscoe, IL
Posts: 1,704
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Trans Am
Engine: LQ4
Transmission: T-56
Axle/Gears: 3.70
Originally posted by Hugger1974
I have dealt with UMI, I mentioned to them that thirdgen.org had some good info about them and they should look into a sponsorship.
This was there Response: "I have been in contact with them in interest of sponsoring there site, but the response I had gotten was that they were full and not accepting anymore sponsors"
How can a company support a site that doest allow anymore supporting? I also think it is good to support the sponsors, but because a company is not a sponsor we should not deal with them? That seems a bit harsh...
I have dealt with UMI, I mentioned to them that thirdgen.org had some good info about them and they should look into a sponsorship.
This was there Response: "I have been in contact with them in interest of sponsoring there site, but the response I had gotten was that they were full and not accepting anymore sponsors"
How can a company support a site that doest allow anymore supporting? I also think it is good to support the sponsors, but because a company is not a sponsor we should not deal with them? That seems a bit harsh...
#13
Supreme Member
iTrader: (4)
Join Date: Sep 1999
Location: Upland Pa
Posts: 1,716
Likes: 0
Received 0 Likes
on
0 Posts
Car: Camaro Vert
Engine: 355 HSR
Transmission: A4
Axle/Gears: 3.73 S60
Originally posted by Hugger1974
I have dealt with UMI, I mentioned to them that thirdgen.org had some good info about them and they should look into a sponsorship.
This was there Response: "I have been in contact with them in interest of sponsoring there site, but the response I had gotten was that they were full and not accepting anymore sponsors"
How can a company support a site that doest allow anymore supporting? I also think it is good to support the sponsors, but because a company is not a sponsor we should not deal with them? That seems a bit harsh...
I have dealt with UMI, I mentioned to them that thirdgen.org had some good info about them and they should look into a sponsorship.
This was there Response: "I have been in contact with them in interest of sponsoring there site, but the response I had gotten was that they were full and not accepting anymore sponsors"
How can a company support a site that doest allow anymore supporting? I also think it is good to support the sponsors, but because a company is not a sponsor we should not deal with them? That seems a bit harsh...
That is just my opinion though.
Kat
#14
Member
Thread Starter
Join Date: Oct 2002
Location: memphis
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Car: 67 camaro ( project )
Engine: 6.7 408 n a snail
Transmission: 4l80 - stalled
Axle/Gears: 3.25 - narrowd tci kit 9 inch
all the products i bought installed beautifully and seemed to make a difference in my traction. i will take her to the track probly in the next week or too to see how she does w/ these parts.
#15
TGO Supporter/Moderator
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,737
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Originally posted by KagA152
i support site sponsors
i support site sponsors
I buy what I think works best.
-- Joe
#16
Member
Join Date: Oct 2005
Location: Vancouver Island, BC, Canada
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC
Engine: 5.0
Transmission: 5 speed
UMI SFC GP
#17
Member
Thread Starter
Join Date: Oct 2002
Location: memphis
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Car: 67 camaro ( project )
Engine: 6.7 408 n a snail
Transmission: 4l80 - stalled
Axle/Gears: 3.25 - narrowd tci kit 9 inch
wow waking the dead on this thread
i have now had the same lca/s and relo brackets on 2 cars now, my 86 iroc and now my 99 z i love them they are fantastic. i consistantly saw lower 60 ft times w/ these on both cars. it sux but on my street tires now i ger 2.0 lights w/ lca and relos. i actually am getting the 2 pt sfc from them after christmas ans a stb for the 99.
i have now had the same lca/s and relo brackets on 2 cars now, my 86 iroc and now my 99 z i love them they are fantastic. i consistantly saw lower 60 ft times w/ these on both cars. it sux but on my street tires now i ger 2.0 lights w/ lca and relos. i actually am getting the 2 pt sfc from them after christmas ans a stb for the 99.
#18
Supreme Member
iTrader: (8)
Join Date: Jan 2000
Location: Macedonia ,OH
Posts: 3,968
Likes: 0
Received 1 Like
on
1 Post
Car: Formula
Engine: 6.0 LSX
Transmission: 4L60E
Axle/Gears: 9 Bolt 3:27
UMI Performance stuff here also. I love their stuff and the service is outstanding. Shipping is priced very well.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
83 Crossfire TA
Suspension and Chassis
6
09-18-2015 12:01 PM