GM HIGH TECH is looking for YOU!!
Senior Member
Joined: May 2005
Posts: 741
Likes: 1
From: Baldwin Park
Re: GM HIGH TECH is looking for YOU!!
1983 Z28 L69 H.0. swapped to H/C LS1 with GTO 6 speed, Moser 12 bolt, full exhaust and bolt ons --> 400+ rwhp/400+ rwtq. Full leather TA interior, seats and functional dash.
Junior Member
Joined: Jul 2009
Posts: 12
Likes: 0
From: miami florida 305
Car: 1986 iroc-z camaro
Engine: 305
Transmission: 700r4
Axle/Gears: 373 gears
Re: GM HIGH TECH is looking for YOU!!
1986 iroc-z aka miamiirocz
carburated 305 with work
dual 3 inch flowmaster exhaust
9 inch rear
17x8 c5 front
18x9.5 c5 rear
new interior
system
wave blue pearl. 2007
Last edited by miamiirocz; May 7, 2010 at 03:40 PM. Reason: posted without pics
Senior Member
Joined: Jul 1999
Posts: 811
Likes: 5
From: Maple Grove MN USA
Car: 1984 Z28 Camaro
Engine: H.O. 355 NOS
Transmission: 700R4
Re: GM HIGH TECH is looking for YOU!!
1984 Chev Z28 Camaro (bought new). 355, 10.3 to 1 Manley forged pistons, Cam Dynamics cam 222* at .050" .470" lift, 310 HP @ 5700 rpm, 160* stat, SLP 1 5/8" SS headers, Accel 300 plug wires, Magnaflow muffler, 735 Q-Jet CCC carb, Homemade 14" x 3.0" Air Cleaner K&N filter, 150 shot NOS 460 HP, Holly elect. fuel pump, B&M shift kit, Non-lockup T/C, 2.77 9 bolt rear, Goodyear Eagle's 245/60-15's, Paterson 3.0" driveshaft,
Last edited by Auggie; Nov 13, 2010 at 09:42 AM.
Joined: Jul 1999
Posts: 1,272
Likes: 2
From: Muskego, WI
Car: 1985 Trans Am
Engine: 350
Transmission: T5
Axle/Gears: 3.70
Re: GM HIGH TECH is looking for YOU!!
1985 Trans Am
355ci, Dart Pro1 heads, Cam Motion cam, Retrotek EFI system, Baer brakes, BMR rear suspension, custom dash, Arizen seats, etc.....
Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 4,226
Likes: 6
From: Chesterfield, Indiana
Car: 1991 Z28 Camaro
Engine: 5.7
Transmission: Jasper 700R4 Stage II
Axle/Gears: 3.23 For Now
Re: GM HIGH TECH is looking for YOU!!
What members 3rd gens have been in the magazine so far?
Supreme Member
iTrader: (9)
Joined: Sep 2001
Posts: 2,984
Likes: 37
From: North Central Indiana
Car: 86 IROC
Engine: 383
Transmission: TKO 600
Axle/Gears: 3.54 Dana 44 IRS
Senior Member
Joined: Jul 1999
Posts: 811
Likes: 5
From: Maple Grove MN USA
Car: 1984 Z28 Camaro
Engine: H.O. 355 NOS
Transmission: 700R4
Re: GM HIGH TECH is looking for YOU!!
1bad91Z, if you mean my ride its original 1984 black paint. Where would I find the paint code?
Auggie
Auggie
Last edited by Auggie; Nov 13, 2010 at 09:42 AM.
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
Karps, it looks outstanding. 
Member
Joined: Apr 2010
Posts: 174
Likes: 0
From: Garden Grove,Ca
Car: 92 RS
Engine: 5.slow
Transmission: 5speed
Re: GM HIGH TECH is looking for YOU!!
Here's my 92 RS 305,5 speed.Its got 168,000 miles on and still runs great.Only mods so far is a 3in exhaust with hiflow cat and flowmaster.Been in the family since 2000.
Supreme Member
iTrader: (3)
Joined: Feb 2002
Posts: 2,635
Likes: 1
From: Central Coast Calif.
Car: 91' Camaro
Engine: 383 ci
Transmission: T-56
Axle/Gears: 9 bolt / 3:70
Re: GM HIGH TECH is looking for YOU!!
383 ci Superram, t-56, 3:70, Intro v-rod 20" & 18" currently, S&W 8 point, etc...
Jason
(the paint was done in 1994, the hood was redone and blended into the fenders/nose in 02' in my garage...- still looks pretty good)
Joined: Jun 2008
Posts: 160
Likes: 0
From: Waterloo, Iowa
Car: 1987 Pontiac Trans AM GTA
Engine: 5.7 LTR
Transmission: Automatic
Member
Joined: Jun 2001
Posts: 120
Likes: 0
From: Iowa
Re: GM HIGH TECH is looking for YOU!!
Justin, Thanks for the article in Street Heat. Big thumbs up for giving credit where credit is due.
http://www.gmhightechperformance.com...aro/index.html
http://www.gmhightechperformance.com...aro/index.html
Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 4,226
Likes: 6
From: Chesterfield, Indiana
Car: 1991 Z28 Camaro
Engine: 5.7
Transmission: Jasper 700R4 Stage II
Axle/Gears: 3.23 For Now
Re: GM HIGH TECH is looking for YOU!!
Justin, Thanks for the article in Street Heat. Big thumbs up for giving credit where credit is due
That goes for me too
http://www.gmhightechperformance.com...z28/index.html
On Probation
iTrader: (9)
Joined: Feb 2005
Posts: 2,042
Likes: 2
From: So Cal
Car: 87 IROC-Z
Engine: LsX
Transmission: MN12 6speed
Axle/Gears: 3:42
Member
Joined: Feb 2009
Posts: 169
Likes: 0
From: NY
Car: Trans Am, Corvette
Engine: LB9, LT1
Transmission: 700R4, 4L60
Axle/Gears: 373, 259
Re: GM HIGH TECH is looking for YOU!!
I just want to give a heads up to some of you guys. GMHT does not feature Carb cars at all. There all GM FI, hence there name.
BTW, Some really Awesome rides in this thread.
Looking good Erick, you should be a shoe in.
BTW, Some really Awesome rides in this thread.
Looking good Erick, you should be a shoe in.
Supreme Member
iTrader: (3)
Joined: Jun 2000
Posts: 1,680
Likes: 2
From: CT
Car: Used to drive a camaro
Re: GM HIGH TECH is looking for YOU!!
They also don't typically feature any work in progress cars, car's in primer, etc. Now that's GM-HiTech, Camaro Performers might feature some of those.
Supreme Member
Joined: Aug 2003
Posts: 1,644
Likes: 4
From: Long Island New York
Car: 89 Formula 350
Engine: Forged 385 H/C/I
Transmission: 700R4-4300 Stall-lockup
Axle/Gears: BW 9 Bolt 3:70
Supreme Member
iTrader: (1)
Joined: Feb 2005
Posts: 2,642
Likes: 2
From: Pleasant Grove, Utah
Car: 1993 GMC Typhoon
Engine: 4.3 Turbo
Transmission: 4L60
Axle/Gears: 3.42
Re: GM HIGH TECH is looking for YOU!!
wow everything is very nice on that white car... EXCEPT... those aweful aweful head lights.... YUCK... otherwise... nice build
Senior Member
iTrader: (5)
Joined: Feb 2008
Posts: 932
Likes: 0
From: oklahoma
Car: 02wrx/88 rs
Engine: 2.0L turbo/nothing yet!
Transmission: 4eat/waiting on a t56
Axle/Gears: 3.73
Joined: Sep 2003
Posts: 93
Likes: 1
From: Warren, Oh
Car: 89 IROC
Engine: 355
Transmission: 5 sp., Alum Driveshaft
Axle/Gears: 3.73 Posi
Re: GM HIGH TECH is looking for YOU!!
'89 IROC, 355 c.i., 52mm TB, Ported Plemum, 26# Injectors, Large Tube Runners, LT4 Hot Cam, 1.6 Roller Rockers, Hooker Headers, 5 Spd, Hurst Short Throw Shifter, Alum Driveshaft, 3.73 Posi, 4th Gen Seats, 17" Wheels,
Junior Member
Joined: Jan 2010
Posts: 46
Likes: 0
From: northern california
Car: 87 iroc z28
Engine: 89 C4 TPI ,
Transmission: ZF6 speed , 89 C4
Axle/Gears: 89 corvette rear end
Re: GM HIGH TECH is looking for YOU!!
Great looking car!!!!Headlights are cool,big brakes and nice stance, good work
Thread Starter
Junior Member
Joined: Jan 2010
Posts: 10
Likes: 0
Re: GM HIGH TECH is looking for YOU!!
Looked great too!
Thank YOU for building such a nasty Camaro!
You already know how I feel about your car, thanks again for submitting!
Also, I have some new PM's going out now - thanks THIRDGEN, you guys/gals rock!
Justin, Thanks for the article in Street Heat. Big thumbs up for giving credit where credit is due.
http://www.gmhightechperformance.com...aro/index.html
http://www.gmhightechperformance.com...aro/index.html
Also, I have some new PM's going out now - thanks THIRDGEN, you guys/gals rock!
Supreme Member
iTrader: (1)
Joined: Sep 2002
Posts: 2,565
Likes: 10
From: Texas
Car: 1992 Formula Firebird
Engine: 305CID (LB9)
Transmission: World Class T5
Axle/Gears: 10-bolt, 4.10 gears
Senior Member
iTrader: (5)
Joined: Feb 2008
Posts: 932
Likes: 0
From: oklahoma
Car: 02wrx/88 rs
Engine: 2.0L turbo/nothing yet!
Transmission: 4eat/waiting on a t56
Axle/Gears: 3.73
Supreme Member
iTrader: (1)
Joined: Sep 2002
Posts: 2,565
Likes: 10
From: Texas
Car: 1992 Formula Firebird
Engine: 305CID (LB9)
Transmission: World Class T5
Axle/Gears: 10-bolt, 4.10 gears
Joined: Sep 2005
Posts: 6,258
Likes: 6
From: O'Fallon, MO
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: GM HIGH TECH is looking for YOU!!
Hey Justin, did you get my PM? 
Senior Member
iTrader: (4)
Joined: May 2006
Posts: 704
Likes: 2
From: Beloeil, Quebec
Car: IROC-Z
Engine: LSx
Transmission: T56
Axle/Gears: Fabbed 9"
Junior Member
Joined: Aug 2009
Posts: 8
Likes: 0
From: Davenport, Iowa
Car: 91 Carmaro Rs
Engine: 305 Carb
Transmission: 4spd Auto
Re: GM HIGH TECH is looking for YOU!!
Mod List and More Pictures can be found here:
https://www.thirdgen.org/forums/album.php?albumid=666
Been a fan of GM High Tech for as long as I can remember... It is a dream come true for us to be able to show the rest of the world the hard work we put into our vehicles... Thank You for the opportunity...
"Car looks Bad *** man!! Love the leds and headlights man!"
Member
Joined: Apr 2010
Posts: 174
Likes: 0
From: Garden Grove,Ca
Car: 92 RS
Engine: 5.slow
Transmission: 5speed
Re: GM HIGH TECH is looking for YOU!!
Camaro 1989 RS with 92 z28 gfx
383 stroker by Frank Bash engines
Late 350 block one piece rear main seal
Eagle forged stroker kit with:
4340 forged H-beam connecting rods 5.7
SRP dished forged pistons
Eagle 4340 crank 3.750
Dart heads Pro 1 aluminum
215 intake runners, 64cc, 2.05/1.60
Crower high rev kit
Crower solid roller cam #00426
Lift .57/.584 duration 288/290degrees lobe separation 112 degrees
Competition cams 1.5 roller rockers
Moroso stroker oil pan
Miniram intake manifold with fuel rail kit
BBK 58MM Throttle body
Flex a lite dual fans
160 tstat
T76 turbonetics turbo, turbonetics raptor bov, turbonetics wastegate evolution.
BBS design turbo header
Mufflex Ypipe
Mufflex 4inch catback with spintech muffler
Air Ride front and rear Cool Ride kit
This are some of the mods on my car. Too much to list. Additional photos and the list on cardomain http://www.cardomain.com/ride/373298
Thanks
Jimmy
383 stroker by Frank Bash engines
Late 350 block one piece rear main seal
Eagle forged stroker kit with:
4340 forged H-beam connecting rods 5.7
SRP dished forged pistons
Eagle 4340 crank 3.750
Dart heads Pro 1 aluminum
215 intake runners, 64cc, 2.05/1.60
Crower high rev kit
Crower solid roller cam #00426
Lift .57/.584 duration 288/290degrees lobe separation 112 degrees
Competition cams 1.5 roller rockers
Moroso stroker oil pan
Miniram intake manifold with fuel rail kit
BBK 58MM Throttle body
Flex a lite dual fans
160 tstat
T76 turbonetics turbo, turbonetics raptor bov, turbonetics wastegate evolution.
BBS design turbo header
Mufflex Ypipe
Mufflex 4inch catback with spintech muffler
Air Ride front and rear Cool Ride kit
This are some of the mods on my car. Too much to list. Additional photos and the list on cardomain http://www.cardomain.com/ride/373298
Thanks
Jimmy
Moderator
Joined: Jul 2001
Posts: 5,225
Likes: 70
From: Buffalo, NY
Car: 1988 IROC-Z
Engine: 427 SBC
Transmission: ProBuilt 700R4
Axle/Gears: Moser 12 Bolt / 3.73 TrueTrac
Re: GM HIGH TECH is looking for YOU!!
I had better pictures. But they all came out with red dots on them. Camera is taking a dump 
Member
iTrader: (2)
Joined: Sep 2006
Posts: 340
Likes: 1
From: Fort Hood, Texas
Car: 1991 Camaro Z28
Engine: 2002 SS LS1
Transmission: 6 speed
Axle/Gears: Auburn 3.42
Re: GM HIGH TECH is looking for YOU!!
Mods in sig. I know they say sometimes it hard to do features because of location. I would glady drive my car to anywhere in the US to get my car featured. I realize it doesnt have the money thrown at it some cars do, but my car is a bonnafied 300rwhp daily driven LS1 swap Camaro that I did in my own driveway.
My Streetfire, pictures and racing videos....
http://www.streetfire.net/profile/Bradlyj8Z28.htm
LS1 swap pictures....
http://www.facebook.com/home.php?#!/album.php?aid=750&id=100001248815940
LS1 swap thread....
https://www.thirdgen.org/forums/ltx-...-z28-swap.html
My Streetfire, pictures and racing videos....
http://www.streetfire.net/profile/Bradlyj8Z28.htm
LS1 swap pictures....
http://www.facebook.com/home.php?#!/album.php?aid=750&id=100001248815940
LS1 swap thread....
https://www.thirdgen.org/forums/ltx-...-z28-swap.html
Last edited by Bradlyj8Z28; Jul 2, 2010 at 12:41 PM.
Junior Member
Joined: Dec 2006
Posts: 22
Likes: 0
Re: GM HIGH TECH is looking for YOU!!
This is my 1983 Z28, and I figured here are the highest resolution pics I have so why not throw em up.
This Canadian Car is pretty much bone stock except for the 430 hp 350ci V8 it hides under the hood
The car now boasts a UMI Suspension system, with an Eibach prokit 1.5 drop spring package. Also added was a harwood 3" Cowl in matching body colour to accomadate the higher eldelbrock air-gap intake manifold.
This Canadian Car is pretty much bone stock except for the 430 hp 350ci V8 it hides under the hood
The car now boasts a UMI Suspension system, with an Eibach prokit 1.5 drop spring package. Also added was a harwood 3" Cowl in matching body colour to accomadate the higher eldelbrock air-gap intake manifold.
Senior Member
iTrader: (3)
Joined: May 2010
Posts: 976
Likes: 0
From: Northwest Indiana, Kouts
Car: 88' White-Black Trans Am
Engine: Trying to find a motor
Transmission: 4L60E
Axle/Gears: 3.23
Re: GM HIGH TECH is looking for YOU!!
My car is an 88 Trans Am and it has all the GTA Options on it,including the rims!It also has the T-Tops,Performance suspension,and performance sound.Perfect map pocket,VERY PERFECT interior,original GMC TTop Bag. Im only 16 years old and im using every penny i have to restore this car
Mods: New rear hatch off a Firebird,GTA rims,JVC KD-LH300 Headunit,Two 10inch 250 Watt MTX Subs in a custom box,Rockford fosgate p300 amp,2 new 4x6 Alpine Type SRS-406 Speakers,American Legacy 300 W 6 1/2 inch subs,new starter,new exhaust,rebuilt heads,new oil pan,new Goodyear Tires(50's) New front bumper,new front headlights,newer rear tail lights,Decals, and new steering column. It also has newer 5% window tint. New rear hatch glass also,and spoiler with working brake light.
Junior Member
Joined: Jul 2010
Posts: 9
Likes: 0
From: PEI, Canada
Car: 1987 Iroc - Z
Engine: 305
Transmission: t-5
Re: GM HIGH TECH is looking for YOU!!
My name is Mitchell Anger, I am 18 with an 87 IROC.
305 bored 40 over
flat top pistons
mild cam
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
305 bored 40 over
flat top pistons
mild cam
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Re: GM HIGH TECH is looking for YOU!!
I take 2 years off and thought for sure i'd be blown away by some of the new things you guys are doing to thirdgens... Where are the feature rides let alone reader rides? Is the love for the thirdgen still not met that mark yet?
don't know if Jim's still around but I just finished the 5th complete ground up rebuild on the 91 if you guys need another cover car let me know.
don't know if Jim's still around but I just finished the 5th complete ground up rebuild on the 91 if you guys need another cover car let me know.
Member
Joined: Feb 2010
Posts: 222
Likes: 0
From: rittman,ohio
Car: 82 camaro berlinetta (z28clone)
Engine: gmpp 350,edelbrock,msd,k&n
Transmission: stage 2 maddog 700r4
Axle/Gears: motive gear 4.10/ eaton posi
Re: GM HIGH TECH is looking for YOU!!
this is the badest third gen camaro ever....so many details.great job!!!! can't wait to see it all done. one quesstion for you......on your iroc taillights...how did you get the taillights to be all red....how did you get rid of the amber section?if you don't mind me asking...thanks
matt
matt
Joined: Jul 2002
Posts: 847
Likes: 2
From: Vancouver BC
Car: Custom 1992 Camaro Z28 25th Anniver
Engine: 5.7L V8 350 L98 TPI
Re: GM HIGH TECH is looking for YOU!!
this is the badest third gen camaro ever....so many details.great job!!!! can't wait to see it all done. one quesstion for you......on your iroc taillights...how did you get the taillights to be all red....how did you get rid of the amber section?if you don't mind me asking...thanks
matt
matt
Member
Joined: Feb 2010
Posts: 222
Likes: 0
From: rittman,ohio
Car: 82 camaro berlinetta (z28clone)
Engine: gmpp 350,edelbrock,msd,k&n
Transmission: stage 2 maddog 700r4
Axle/Gears: motive gear 4.10/ eaton posi
Re: GM HIGH TECH is looking for YOU!!
sorry i mean the shaved white camaro done by spikez
Re: GM HIGH TECH is looking for YOU!!
They wont pick it, but heres the toy
92 Firebird 5.3/4L60E swap with a T-bird M90
Bottom of the barrel budget everything. Lots of custom fab work
Before the blower
92 Firebird 5.3/4L60E swap with a T-bird M90
Bottom of the barrel budget everything. Lots of custom fab work
Before the blower
Supreme Member
iTrader: (2)
Joined: Aug 2001
Posts: 1,081
Likes: 3
From: Peoria, IL USA
Car: 91 GTA
Engine: 377ci
Transmission: T56
Axle/Gears: QP Ford 9" 3.70s
Re: GM HIGH TECH is looking for YOU!!
I updated pictures to show atleast the roadable product. Not expecting much, because there are some KILLER CARS in this post. My hats off to a good many of you. Really diggin the BMW lights.
I grew up had a kid and all that good stuff, but I am finally getting back around to getting her back on the road. I think it will clean up.
I will have cleaner pics of the motor soon, it has been a 4 year project that just started running. (Updated!)
377 SBC With thermal coated Wiesco slugs/Scat 4340 Rods/Scat 4340 Crank
905 Holley Off Shore Marine Vortec Racing Intake MPI
Holley Commander 950 With tweaks
Pro Topline Vortec Heads Taken to 185CC runners
94 Camaro T56 With Viper input shaft/Countershaft/shift forks
Centerforce flywheel with Ram 6 Puck disk with custom pads and custom centerforce diaphram
ROH Wheels
Custom Interior
Stock rear and torque arm that are not long for this world
I grew up had a kid and all that good stuff, but I am finally getting back around to getting her back on the road. I think it will clean up.
I will have cleaner pics of the motor soon, it has been a 4 year project that just started running. (Updated!)
377 SBC With thermal coated Wiesco slugs/Scat 4340 Rods/Scat 4340 Crank
905 Holley Off Shore Marine Vortec Racing Intake MPI
Holley Commander 950 With tweaks
Pro Topline Vortec Heads Taken to 185CC runners
94 Camaro T56 With Viper input shaft/Countershaft/shift forks
Centerforce flywheel with Ram 6 Puck disk with custom pads and custom centerforce diaphram
ROH Wheels
Custom Interior
Stock rear and torque arm that are not long for this world
Supreme Member
Joined: Nov 2008
Posts: 1,545
Likes: 10
From: South Carolina
Car: 85 2M6, 87 'Bird 88 'burb
Engine: LX9, LG4, L05
Transmission: F23, 700r4, 700R4
Axle/Gears: 3.63, 2.73, 4.10
Junior Member
Joined: Jul 2010
Posts: 3
Likes: 0
From: penna.
Car: 79 bird w 403, 92formula conv. da b
Engine: 403
Transmission: r4
Axle/Gears: limited slip
Re: GM HIGH TECH is looking for YOU!!
I love it! Yours is the first I've seen that year. I have a 92 Form. Conv. 55 produced. Almost had to sell it but GOD is GOOD and I'm keeping it too! I have a 79 Espirit Skybird with a 403 6.6! Keep it, guard it, Drive it every chance you get!!