Meeting??? which weekend???
05-12-2006, 12:18 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: Aurora,CO
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro RS
Engine: 305
Meeting??? which weekend???
Hey guys, did we ever decide where & when? we're going to meet????
And are we going to Estes Park or are we going to Red Rocks or Colorado Springs?...
just curious...we're already into mid-month.....Ok laters, gotta get to bed...have an appt. in Golden @ Sixth West Ave Estates after 5pm. need sleep. Yall wish me luck....I want this deal!!!! House worth $480,000-$500,000. So yeah......"Lit'l Moma" trying to make dat Money Honey! 
i'm working it, I'm working it!!!......
Laters,
Keli D.
And are we going to Estes Park or are we going to Red Rocks or Colorado Springs?...
just curious...we're already into mid-month.....Ok laters, gotta get to bed...have an appt. in Golden @ Sixth West Ave Estates after 5pm. need sleep. Yall wish me luck....I want this deal!!!! House worth $480,000-$500,000. So yeah......"Lit'l Moma" trying to make dat Money Honey! i'm working it, I'm working it!!!...... Laters,
Keli D. 
05-12-2006, 05:33 PM
#2
Supreme Member
iTrader: (2)
Join Date: Feb 2006
Location: 39.84N 105.11W
Posts: 1,547
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Trans Am GTA
Engine: WAS 350 - now L92 (alum. 378/6.2L)
Transmission: WAS 700R4, now a built T56
Axle/Gears: 3.27 9-bolt
Well, tonight I'm probably going to be at the Sonic on Federal (around 94th or so) eating ice cream & checking out all the hot new street machines that have showed up. Other than that, I'm open to suggestions...
05-12-2006, 11:11 PM
#3
Supreme Member
iTrader: (2)
Join Date: Feb 2006
Location: 39.84N 105.11W
Posts: 1,547
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Trans Am GTA
Engine: WAS 350 - now L92 (alum. 378/6.2L)
Transmission: WAS 700R4, now a built T56
Axle/Gears: 3.27 9-bolt
OK, Sonic rocked tonight - here's just a taste of what you guys missed...
(Actually, not everyone missed it, it was good to see Mike [carbed87] there
)
(Actually, not everyone missed it, it was good to see Mike [carbed87] there
)
05-13-2006, 12:25 AM
#4
Supreme Member
iTrader: (1)
Join Date: Aug 2004
Location: colorado
Posts: 2,122
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Trans/am convertible
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 2.73 drum WS6
My pro/am is getting some upgrades, so I am kinda busy with that.
I am willing to meet up with people, but its kinda hard to plan one day before the event.
I agree that we should plan something in advance, and meet up. mr. rumble next time you go to sonic let me know. We can meet up and cruise down there!
Was mike driving??? That little rascal!
I am willing to meet up with people, but its kinda hard to plan one day before the event.
I agree that we should plan something in advance, and meet up. mr. rumble next time you go to sonic let me know. We can meet up and cruise down there!
Was mike driving??? That little rascal!
05-17-2006, 10:54 PM
#5
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
We should really put our heads together on this one and get something set up. I'm still down for a cruise someone just tell me where to go!
Even if we had to meet at house, or a burger joint lets try to get everyone there. I say everyone just post up an idea and we'll work with whats put out there.
Brandon
Even if we had to meet at house, or a burger joint lets try to get everyone there. I say everyone just post up an idea and we'll work with whats put out there.Brandon
05-18-2006, 01:29 AM
#6
Supreme Member
iTrader: (1)
Join Date: Aug 2004
Location: colorado
Posts: 2,122
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Trans/am convertible
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 2.73 drum WS6
Yea we have to get together somewhere and cruise form there.
I think we should start acting like a club.
So, I suggest we get together at a restaurant or any joint. Talk what we are going to do and do it.
I think we should start acting like a club.
So, I suggest we get together at a restaurant or any joint. Talk what we are going to do and do it.
05-19-2006, 02:13 AM
#7
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
c'mon folks! lets get something going here! I am down to volunteer my house for a meeting, but ya'll know its almost wyoming. I am still ok with coming to the big city hang out with all, but lets set a time an date. Post an idea for a meeting place - any idea is better than no idea at all.
Trending Topics
05-24-2006, 09:15 AM
#8
Member
Join Date: Jun 2003
Location: Aurora Colorado
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 camaro
Engine: 305c.i.d...... FOR NOW
Transmission: 700R4.....FOR NOW
Axle/Gears: 3.42 moser posi
Ok guys once again I'm opening my house for our meeting, now lets set a date and get together. I work on saturdays till 5:00, but I am always in the mood for a get together so lets get it going. Whats good for everyone else? We have a new member, The third gen bug bit my stepson and he was pretty impressed at all the fine cars our members have he was asking when the next meeting is so post up lets get a date for a meeting
05-24-2006, 10:29 AM
#9
Senior Member
Join Date: May 2003
Location: Thornton, CO
Posts: 798
Received 0 Likes
on
0 Posts
Car: 1987 GTA 350
Engine: L98
Transmission: 700R4/2400 stall
Axle/Gears: B/W 3:27 posi disc
My car is down, but I will show to what ever meeting is set up. Plus I've been really busy.....
Conrad
Conrad
05-24-2006, 01:33 PM
#11
Supreme Member
iTrader: (1)
Join Date: Aug 2004
Location: colorado
Posts: 2,122
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Trans/am convertible
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 2.73 drum WS6
I might be going down to coloradosprings within next two weeks, depending if my car sells or not. Anyone wanna gimmie a ride to c-springs so I can pick up my new iroc???
Yeah Russ G. only shows up at his house. It would be funny if we decided to meet at Russ's house and he didn't show up .
All joking aside, it would be awsome to meet at somebodys house.
How about we meet in 2-3 weeks from now???
Like lets say, sat. June 17th. at 7pm. What do you think???
Yeah Russ G. only shows up at his house. It would be funny if we decided to meet at Russ's house and he didn't show up
.All joking aside, it would be awsome to meet at somebodys house.
How about we meet in 2-3 weeks from now???
Like lets say, sat. June 17th. at 7pm. What do you think???
05-24-2006, 04:15 PM
#12
Member
Join Date: May 2001
Location: Castle Rock, CO
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Turbo Trans Am, '14 Forester XT
Engine: 3.8 Turbo V6
Transmission: 2004-R
Axle/Gears: 3.27
There are some car shows that day:
New Page 1
Highlands Ranch Community Association presents a Classic Car Show
http://www.bumpstop.com/cruisin_dave...rown_lanes.pdf
I was planning on going to the 2nd one, in Highlands Ranch. Maybe we could all meet up somewhere after that at a restraunt or something!
New Page 1
Highlands Ranch Community Association presents a Classic Car Show
http://www.bumpstop.com/cruisin_dave...rown_lanes.pdf
I was planning on going to the 2nd one, in Highlands Ranch. Maybe we could all meet up somewhere after that at a restraunt or something!
05-24-2006, 04:24 PM
#13
Supreme Member
iTrader: (2)
Join Date: Feb 2006
Location: 39.84N 105.11W
Posts: 1,547
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Trans Am GTA
Engine: WAS 350 - now L92 (alum. 378/6.2L)
Transmission: WAS 700R4, now a built T56
Axle/Gears: 3.27 9-bolt
Small projects?
I just had another thought (don't roll your eyes like that!) - instead of just meeting up & BS'ing, maybe we could include a minor "project" while we're meeting, on those days when we're not cruising to somewhere.
Specifically, I'm thinking of porting the TPI plenum for those members who may not have done it yet - I don't yet have a die grinder, but I do have the carbide bits that I bought when I ported mine (I also have a couple extra sets of eye protection!
)...
I dunno, it would be fairly quick for each one, wouldn't cost anything, would be directly related to 3rdgen performance, & would be educational to those who are just getting started...
OK, there it is, I've hung it up there like a piñata, go ahead & "thwack away" at it... :shrug:
Specifically, I'm thinking of porting the TPI plenum for those members who may not have done it yet - I don't yet have a die grinder, but I do have the carbide bits that I bought when I ported mine (I also have a couple extra sets of eye protection!
)...I dunno, it would be fairly quick for each one, wouldn't cost anything, would be directly related to 3rdgen performance, & would be educational to those who are just getting started...
OK, there it is, I've hung it up there like a piñata, go ahead & "thwack away" at it... :shrug:
05-24-2006, 09:31 PM
#14
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
I threw this out at the last meeting so here we go. The Goodguys rod and custom show is at the Budwieser events center next weekend. This is a three day event starts on friday 2nd, and ends sunday. This is the largest rod and custom show in Colorado. There is all kinds of places to eat (Colorados largest Hooters) in the area around the events center. We could all meet at a restraunt, then hit the show up for the rest of the afternoon. For the guys that might have ladies that might not be interested in an all day car thing, there is a huge shopping complex, and outlet mall. I'm going at least one of the days.
05-24-2006, 10:18 PM
#15
Supreme Member
iTrader: (2)
Join Date: Feb 2006
Location: 39.84N 105.11W
Posts: 1,547
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Trans Am GTA
Engine: WAS 350 - now L92 (alum. 378/6.2L)
Transmission: WAS 700R4, now a built T56
Axle/Gears: 3.27 9-bolt
Oh HELL yeah - if we can go on Sat. (or maybe even Fri.), I am there.
Assuming that the body shop ever finishes with our car..!!!
(I don't think that I can have the GTA all ready to go in just a week...
)
Assuming that the body shop ever finishes with our car..!!!
(I don't think that I can have the GTA all ready to go in just a week...
) Last edited by V8Rumble; 05-24-2006 at 10:26 PM.
05-24-2006, 11:38 PM
#16
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
I am planning on going on sat. So if any one else is down lets make a plan. 
05-25-2006, 01:35 PM
#17
Supreme Member
iTrader: (1)
Join Date: Aug 2004
Location: colorado
Posts: 2,122
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Trans/am convertible
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 2.73 drum WS6
I plan on going, but I might not have a car than. Maybe someone can pick me up or sumtin. I am like 5 mins. away from downtown.
Hopefully I get my car sold and get another one before then. Wishful thinking.
Hopefully I get my car sold and get another one before then. Wishful thinking.
05-25-2006, 03:06 PM
#18
Senior Member
Join Date: May 2003
Location: Thornton, CO
Posts: 798
Received 0 Likes
on
0 Posts
Car: 1987 GTA 350
Engine: L98
Transmission: 700R4/2400 stall
Axle/Gears: B/W 3:27 posi disc
Originally Posted by V8Rumble
(I don't think that I can have the GTA all ready to go in just a week... )
)I can second that....
05-31-2006, 10:29 PM
#19
Senior Member
Join Date: May 2003
Location: Thornton, CO
Posts: 798
Received 0 Likes
on
0 Posts
Car: 1987 GTA 350
Engine: L98
Transmission: 700R4/2400 stall
Axle/Gears: B/W 3:27 posi disc
Originally Posted by cherryred89
Ok guys once again I'm opening my house for our meeting, now lets set a date and get together. I work on saturdays till 5:00, but I am always in the mood for a get together so lets get it going. Whats good for everyone else? We have a new member, The third gen bug bit my stepson and he was pretty impressed at all the fine cars our members have he was asking when the next meeting is so post up lets get a date for a meeting
Conrad
05-31-2006, 11:02 PM
#20
Supreme Member
iTrader: (1)
Join Date: Aug 2004
Location: colorado
Posts: 2,122
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Trans/am convertible
Engine: 305 TPI
Transmission: 700r4
Axle/Gears: 2.73 drum WS6
One good thing is that we are posting and being active. This is just going to get better.
Oh, and just in case you were wondering I AM KEEPING MY CAR. I thought I had an engine problem, but just a cracked flywheel was not a problem. My bellhousing two bottom bolts were hand tight and thats why, I think, the flywheel cracked. So, I am getting it done on monday by a shop (my dad is helping me pay for it. He is making up for lying to me about helping me with the Z28 that I was looking at).
Anyway, I am gonna talk to RUss if he does not make it here soon, see if he is still up for a meeting.
Oh, and just in case you were wondering I AM KEEPING MY CAR. I thought I had an engine problem, but just a cracked flywheel was not a problem. My bellhousing two bottom bolts were hand tight and thats why, I think, the flywheel cracked. So, I am getting it done on monday by a shop (my dad is helping me pay for it. He is making up for lying to me about helping me with the Z28 that I was looking at).
Anyway, I am gonna talk to RUss if he does not make it here soon, see if he is still up for a meeting.
05-31-2006, 11:22 PM
#22
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
I just made a post about the Goodguys show this weekend, if any are still down. Other than that I am good with Sunday, or next weekend
06-01-2006, 08:03 AM
#23
Supreme Member
iTrader: (2)
Join Date: Feb 2006
Location: 39.84N 105.11W
Posts: 1,547
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Trans Am GTA
Engine: WAS 350 - now L92 (alum. 378/6.2L)
Transmission: WAS 700R4, now a built T56
Axle/Gears: 3.27 9-bolt
Well, with my new schedule (again
) Sundays won't work for me - but Saturdays are OK... 
) Sundays won't work for me - but Saturdays are OK... Last edited by V8Rumble; 06-01-2006 at 08:40 AM.
06-03-2006, 08:29 AM
#24
Member
Join Date: Jun 2003
Location: Aurora Colorado
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 camaro
Engine: 305c.i.d...... FOR NOW
Transmission: 700R4.....FOR NOW
Axle/Gears: 3.42 moser posi
How about the 10th of June does that sound good for everyone??? It's to late to plan anything today so how bout' next Saturday
06-03-2006, 10:32 AM
#26
Supreme Member
iTrader: (2)
Join Date: Feb 2006
Location: 39.84N 105.11W
Posts: 1,547
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Trans Am GTA
Engine: WAS 350 - now L92 (alum. 378/6.2L)
Transmission: WAS 700R4, now a built T56
Axle/Gears: 3.27 9-bolt
I might have to miss this one - I've been invited out of town to attend my nephew's birthday party...
- I've been invited out of town to attend my nephew's birthday party...
06-03-2006, 01:03 PM
#28
Senior Member
Join Date: May 2003
Location: Thornton, CO
Posts: 798
Received 0 Likes
on
0 Posts
Car: 1987 GTA 350
Engine: L98
Transmission: 700R4/2400 stall
Axle/Gears: B/W 3:27 posi disc
Originally Posted by 91BlueTtop
Hey hey peoples..... Sat. the 10th works for me...I'll be there w/ a big smile on my face.... where?
Laters, Keli D.
Laters, Keli D.
Conrad
06-04-2006, 08:36 AM
#30
Member
Join Date: Jun 2003
Location: Aurora Colorado
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 camaro
Engine: 305c.i.d...... FOR NOW
Transmission: 700R4.....FOR NOW
Axle/Gears: 3.42 moser posi
Originally Posted by V8Rumble
I might have to miss this one - I've been invited out of town to attend my nephew's birthday party...
- I've been invited out of town to attend my nephew's birthday party...
06-04-2006, 08:43 AM
#31
Member
Join Date: Jun 2003
Location: Aurora Colorado
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 camaro
Engine: 305c.i.d...... FOR NOW
Transmission: 700R4.....FOR NOW
Axle/Gears: 3.42 moser posi
I get off of work at 5:00 on the 10th so how does 6:30-7:00 sound for a start time??
06-06-2006, 12:22 AM
#33
COTM Editor
iTrader: (11)
Join Date: Mar 2006
Location: WINDSOR, CO
Posts: 4,098
Likes: 0
Received 12 Likes
on
12 Posts
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
I am pretty sure that I can make there, but won't be able to bring the car. I have aquired some new issues to work out that won't allow it to make it all the way down there. I have no clue where Russ's house is so I will need good directions (for the non big city boy). Keep me in the loop.
06-06-2006, 08:59 AM
#34
Senior Member
Join Date: May 2003
Location: Thornton, CO
Posts: 798
Received 0 Likes
on
0 Posts
Car: 1987 GTA 350
Engine: L98
Transmission: 700R4/2400 stall
Axle/Gears: B/W 3:27 posi disc
Originally Posted by BADNBLK
I am pretty sure that I can make there, but won't be able to bring the car. I have aquired some new issues to work out that won't allow it to make it all the way down there. I have no clue where Russ's house is so I will need good directions (for the non big city boy). Keep me in the loop.
Conrad
06-06-2006, 07:52 PM
#35
Senior Member
Join Date: Nov 2000
Location: Queen Creek, AZ
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula
Engine: 383 HSR
Transmission: 5th 700R4
Axle/Gears: 3.89
I'll try and make it depending on how much I get done on my car and when I get done it's finally time to drop the motor back in.
Thread
Thread Starter
Forum
Replies
Last Post
no green
Engine/Drivetrain/Suspension Parts for Sale
11
01-09-2016 09:22 PM