Help with stance of the trans am
#1
Banned
Thread Starter
Join Date: Jun 2002
Location: New York
Posts: 2,790
Likes: 0
Received 0 Likes
on
0 Posts
Car: Trans am
Help with stance of the trans am
My 85 ta sits way too high and i have sportline springs on it. I took the isolators out and have heater hose taped to them so that thier isnt a metal to metal contact. I just put some new bilsteins on and cut off half a coil and the car still sits too damn high. I think it has something to do with the chrysler rear end and the axle tubes being bigger so that it raised up the car . Im wondering if i should cut another half coil off and if i do will it cause any trouble.
#4
Supreme Member
I'm betting a larger rim with some lower profile tires will give you the look you are going for. Either that or you could go for some GTA rims. The place linked below apparently has a good deal on some GTA rims:
Classic Industries Catalog DL
But really... the car looks great to me.
Classic Industries Catalog DL
But really... the car looks great to me.
#7
Banned
Thread Starter
Join Date: Jun 2002
Location: New York
Posts: 2,790
Likes: 0
Received 0 Likes
on
0 Posts
Car: Trans am
looks like another half coil is coming off soon. Also can i change the spring without taking off the rear rims, ive always taken em off b4 and i wonder if i can do it without taking them off. also slp iroc z hows the ride , i have new bilsteins in the rear , and i still wanna lower it more, i think it needs it . How did u get yours so low, and dont you scrape everything with the front now .
Trending Topics
#8
Member
Join Date: Jul 2001
Location: Walnut Creek, CA
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro Sport Coupe Convertible
Engine: Your Momma
Transmission: I can go forwards and backwards
Changing the rear springs and shocks was easy for me, I just jacked it up my the axle, put some jackstands under the CHASSIS, then slowly lowered the axle making sure not to destroy the brake line. From there I managed to pop out the old springs by hand and put in my prokit. You might have to loosen the brake line from the chassis, but I didn't have to at all. Did the shocks at the same time and didn't have any issues nor did I see any reason to take off the wheels.
#9
Banned
Thread Starter
Join Date: Jun 2002
Location: New York
Posts: 2,790
Likes: 0
Received 0 Likes
on
0 Posts
Car: Trans am
well now i just want an answer as to why my car sits so high with a half coil cut and no insulator. The only thing i can think of is that the rear end spring perhes are up higher on the axle and this is why it sits high. I think im gonna take another half a coil off.
#10
Supreme Member
iTrader: (1)
Join Date: Oct 2002
Location: Salem, NH
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1999 Z28
Engine: LS1
Transmission: 6 Speed
Axle/Gears: 9" 4.11 Truetrac
Originally posted by nolanr0413
well now i just want an answer as to why my car sits so high with a half coil cut and no insulator. The only thing i can think of is that the rear end spring perhes are up higher on the axle and this is why it sits high. I think im gonna take another half a coil off.
well now i just want an answer as to why my car sits so high with a half coil cut and no insulator. The only thing i can think of is that the rear end spring perhes are up higher on the axle and this is why it sits high. I think im gonna take another half a coil off.
personally i think that stance is perfect, a little rake is good.
my sportlines are stock, i didnt cut them. however i did not use isolators in the rear when i installed them.
oh yeah, i think my car rides really good with these springs in it, the stock springs never gave as nice of a ride. better handling and better ride, and great stance, i love em.
Last edited by SLP IROC-Z; 06-03-2007 at 04:59 PM.
#12
Supreme Member
iTrader: (1)
Join Date: Jun 2003
Location: Elgin, IL
Posts: 3,085
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1997 Corvette
Engine: LS1
Transmission: 4L60E
Axle/Gears: 2.73 IRS
You only have like and inch and a half ground clearance with your air dam as it is.. why go lower? It looks great. Nice rims by the way, what size are they? I'm going to be putting some C5 17" fronts and 18" rears on my car come spring (buying rims in a few days). Too bad the 35 and 40 profile tires are going to cost me $700+
#14
Supreme Member
iTrader: (1)
Join Date: Oct 2002
Location: Salem, NH
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1999 Z28
Engine: LS1
Transmission: 6 Speed
Axle/Gears: 9" 4.11 Truetrac
Originally posted by nolanr0413
the size of the rims are in the sig. slp iroc do your springs squeak without the isolators.
the size of the rims are in the sig. slp iroc do your springs squeak without the isolators.
#15
Member
Join Date: Nov 2003
Location: Montréal
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
Car: GTA WS-6 1989 fully loaded
Engine: 1995 9C1 LT1 police pak XE cam
Transmission: t-5 borg warner
awsome car.
look good to me keep it like that! i love wings mags and hood combinaison!
#16
Banned
Thread Starter
Join Date: Jun 2002
Location: New York
Posts: 2,790
Likes: 0
Received 0 Likes
on
0 Posts
Car: Trans am
i fixed the stance , i cut another half coil off for a total of 1 whole coil, the car now sits where it should for having a sportline kit installed.
Thread
Thread Starter
Forum
Replies
Last Post