T5 issue
Thread Starter
Member
Joined: Jan 2008
Posts: 249
Likes: 0
Car: 1989 Firebird Formula
Engine: 310 HSR, TFS heads, zz4 cam
Transmission: T5
Axle/Gears: 9 bolt 3:70
T5 issue
89 firebird formula tpi T5... When i try to start the car with the clutch fully floored the car tries to take off like the clutch isnt even pressed. wut is causing this, and how do i fix it?
Supreme Member
iTrader: (1)
Joined: Dec 2006
Posts: 2,403
Likes: 4
From: ms. gulf coast
Car: 91 R/S , 89 dodge p/u
Engine: L31 GM crate re-cammed , 318
Transmission: T-5 , 4 speed auto
Axle/Gears: 3.42 , ?
Re: T5 issue
sounds like you have a blown clutch slave or master cylinder . good luck .
Member
iTrader: (2)
Joined: Sep 2007
Posts: 180
Likes: 0
From: mesa, arizona
Car: 84 Trans Am
Engine: 383
Transmission: Tremec TKO
Axle/Gears: 10 bolt 3.73 lsd
Re: T5 issue
you may need to replace the pilot bushing(or bearing). When it is cold it will grab the input shaft like the clutch is still engaged, after warming up it will operate normally
Thread Starter
Member
Joined: Jan 2008
Posts: 249
Likes: 0
Car: 1989 Firebird Formula
Engine: 310 HSR, TFS heads, zz4 cam
Transmission: T5
Axle/Gears: 9 bolt 3:70
Re: T5 issue
well it has been sitting for 5 months... could that have anythying to do w/ it.. because all of that is reletavely new approximately 5k miles on new clutch kit...
Supreme Member
iTrader: (1)
Joined: Aug 1999
Posts: 2,842
Likes: 6
From: Rowlett, TX
Car: 1988 GTA
Engine: 5.0 TPI
Transmission: T5
Axle/Gears: 9 Bolt, 3.45
Re: T5 issue
Check the fluid level first, it could have a slow leak somewhere. If it is leaking, I would bet it's the slave cylinder.
Trending Topics
Re: T5 issue
hey man yesterday i was having the same problem with the t-5. the clutch pedal was depressed to the floor but seemed that it wouldnt engage. so we put the car up on the jack stands and started in 1st gear, and then went through all five gears. some how that freed up the clutch up and we went rolling down the street.
Last edited by hudjoes; Jun 13, 2008 at 08:12 AM.
Thread
Thread Starter
Forum
Replies
Last Post




