Cooling issue
#1
Cooling issue
Just completed the serpentine belt conversion! Car runs at 220 all the time with fan running all the time. Hose from heater core are hot, vs hoses from.radiator are cool to touch and as if no pressure on top hose! Any idea what could be my problem? Thermostat, water pump, or possibly belt routed wrong? Thermo and water were.bought new when I did the conversion! I k ow even though parts are new, can still be bad parts! My car is an 87 305, carb!!!
TIA
TIA
The following 2 users liked this post by sofakingdom:
Roorancher (03-11-2024), WildCard600 (03-10-2024)
Trending Topics
#9
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (2)
Join Date: Apr 2000
Location: South Windsor, CT
Posts: 1,290
Likes: 0
Received 220 Likes
on
186 Posts
Car: '89 GTA
Engine: ZZ6TPI
Transmission: T56
Axle/Gears: Borg Warner 3.70:1
Re: Cooling issue
Looking up the part number on RockAuto, Gates 43114 is listed for a 1988. 1987 has a different part number. So, the water pump you have should be correct for a serpentine setup.
Are you running the backside (smooth side) of the belt over the water pump pulley?
Are you running the backside (smooth side) of the belt over the water pump pulley?
#11
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
Join Date: Oct 2000
Location: Park City, UT
Posts: 2,007
Received 315 Likes
on
216 Posts
Car: '92 Corvette, '89 1/2-a-'Vette
Engine: LT1, L98
Transmission: ZF6, ZF6
Axle/Gears: 3.45, 3.31
Re: Cooling issue
An air pocket seems pretty unlikely....unless you simply didn't fill the system properly.
#12
Re: Cooling issue
Could someone send me the correct belt routing diagram. My car is an 87 305/carbed car. I converted to serpentine belts. I've found 2.different routing diagrams. Any help would.be greatly appreciated
#14
Re: Cooling issue
That's exactly how I have it routed! Imma change pump, thermostat and radiator/cap and see if that solves my problem
Last edited by bholmes; 03-13-2024 at 04:30 AM.
#16
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (2)
Join Date: Apr 2000
Location: South Windsor, CT
Posts: 1,290
Likes: 0
Received 220 Likes
on
186 Posts
Car: '89 GTA
Engine: ZZ6TPI
Transmission: T56
Axle/Gears: Borg Warner 3.70:1
Re: Cooling issue
That is an 89’
Here’s a good thread discussing the different routings.
https://www.thirdgen.org/forums/tpi/...er-1992-a.html
Doesnt sound like that’s your issue though. Maybe the wrong water pump was in the package, or thermostat not working. Change both and go from there.
Here’s a good thread discussing the different routings.
https://www.thirdgen.org/forums/tpi/...er-1992-a.html
Doesnt sound like that’s your issue though. Maybe the wrong water pump was in the package, or thermostat not working. Change both and go from there.
Thread
Thread Starter
Forum
Replies
Last Post