Do aftermarket convertors cause more noise? Added noise after convertor install.
#1
Do aftermarket convertors cause more noise? Added noise after convertor install.
Hi guys,
I've recently installed a new Edge Racing Convertors 9.5inch "Street Edge" TC set to stall at 2800-3000rpm. It cured a vibration problem I was having and the car has responded really well to the higher stall.
The problem I'm having is since that very day of install there is a new noise my car is making. It is most noticeable when you hold the car in gear, as opposed to leaving it in drive. There is a 'wooing', almost whistling like sound that is louder with higher engine revs. The transmission fluid was changed and the level appears correct. This noise was definitely not there before the new TC was put in.
Any ideas what this could be? Do aftermarket convertors give additional/different sounds? Could there be an additional problem with the transmission itself?
All suggestions are welcome. Thanks!
I've recently installed a new Edge Racing Convertors 9.5inch "Street Edge" TC set to stall at 2800-3000rpm. It cured a vibration problem I was having and the car has responded really well to the higher stall.
The problem I'm having is since that very day of install there is a new noise my car is making. It is most noticeable when you hold the car in gear, as opposed to leaving it in drive. There is a 'wooing', almost whistling like sound that is louder with higher engine revs. The transmission fluid was changed and the level appears correct. This noise was definitely not there before the new TC was put in.
Any ideas what this could be? Do aftermarket convertors give additional/different sounds? Could there be an additional problem with the transmission itself?
All suggestions are welcome. Thanks!
Last edited by Dr G; 05-12-2008 at 06:41 AM.
#2
Member
Join Date: May 2007
Location: new richmond wisconsin
Posts: 197
Likes: 0
Received 0 Likes
on
0 Posts
Car: 5 cars
Re: Do aftermarket convertors cause more noise? Added noise after convertor install.
is it the same when you put the shifter in od vs d or 2 and 1 for that matter??
#3
Member
iTrader: (1)
Join Date: Apr 2005
Location: Ontario, Canada
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Trans Am
Engine: 385 Fast Burn
Transmission: 700R4 - stock (eep!)
Axle/Gears: Stock, will upgrade at some point
Re: Do aftermarket convertors cause more noise? Added noise after convertor install.
I believe I have that TC as well, or something very similar that has just been put into mine. I've noticed that same "wooing", unfortunately I've changed so many other things I couldn't pinpoint if it was this.
Be curious to see inputs from people that also have the Edge TC
Be curious to see inputs from people that also have the Edge TC
#5
Re: Do aftermarket convertors cause more noise? Added noise after convertor install.
#7
Supreme Member
Join Date: Jul 2003
Location: any clime or place...
Posts: 2,779
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro SC, 1999 Z28
Engine: GMPP 350HO, LS1
Transmission: Built 700r4/EDGE 3200, T56
Axle/Gears: 3.42 Eaton 7.625, 3.42 Zexel Torsen
Re: Do aftermarket convertors cause more noise? Added noise after convertor install.
i have an edge 9.5 3200. mine seems like you can hear the fans spinning as well. makes me curious, but i'm not too too worried.
my car makes so many stupid noises anyway, i just crank up the tunes lol.
my car makes so many stupid noises anyway, i just crank up the tunes lol.
Trending Topics
#8
Supreme Member
iTrader: (1)
Join Date: Apr 2000
Location: Northern CA.
Posts: 5,321
Likes: 0
Received 4 Likes
on
4 Posts
Car: '82 Z28
Engine: 350
Transmission: TH400 4,000 stall
Axle/Gears: Currie 9", 4.56 gears
Re: Do aftermarket convertors cause more noise? Added noise after convertor install.
Didn't notice any new noise coming from mine after putting in an Edge converter... exhaust is pretty loud though so might not be able to hear it.
#10
Re: Do aftermarket convertors cause more noise? Added noise after convertor install.
Dana, When I contacted the company directly they say it sounds like a power steering pump low on fluid. You sell these convertors I believe, from your website, have you found them durable enough? That is, do you think I should worry about this noise, or accept it as a 'characteristic' of the new TC?
#11
Supreme Member
Join Date: Jul 1999
Location: Calimesa, California, U.S.
Posts: 3,458
Likes: 0
Received 39 Likes
on
27 Posts
Re: Do aftermarket convertors cause more noise? Added noise after convertor install.
It is just the noise, that I hear complaints on, otherwise the TC's seem to hold up ok.
Thread
Thread Starter
Forum
Replies
Last Post